need help

bluedager4114 · 02-19-08, 06:14 PM

OK so i have a ultramig150 and i need to know what wire i should be using on my fj. What size and the like. im using just CO2 for the gas so if you guys could help me i would be happy. the metal im putting in is 16 ga and its going under the drivers seat where there is a huge hole

Poser · 02-19-08, 06:37 PM

.023 solid core for sheet metal...

CruisinGA · 02-19-08, 07:33 PM

What Poser said.

Co2 will work.

Myself and others prefer C25 which is an argon/C02 mix. Less splatter.

bluedager4114 · 02-19-08, 11:00 PM

thanks guys

02-19-08, 06:14 PM	#1
bluedager4114 IH8MUD Junior Join Date: Dec 2007 Location: Tucson Posts: 76	need help OK so i have a ultramig150 and i need to know what wire i should be using on my fj. What size and the like. im using just CO2 for the gas so if you guys could help me i would be happy. the metal im putting in is 16 ga and its going under the drivers seat where there is a huge hole

02-19-08, 07:33 PM	#3
CruisinGA Ramblin Wreck Join Date: Mar 2003 Location: Georgia Tech Posts: 5,408	What Poser said. Co2 will work. Myself and others prefer C25 which is an argon/C02 mix. Less splatter. __________________ Bailey Quintrell '74 FJ40--37 Irocks-32 Bolt 'Locks-SM420-ARB-XD9000i-FJ60 PS-MetalTech Cage '93 FZJ80-DD-Part Time 4wd-locked-5" lifted-snorkel-bullbar-315 AT's '97 FZJ80 '98 UZJ100-OEM RR locker ΣΧ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-19-08, 06:37 PM	#2
Poser Oh...Durka Durka Durka. Join Date: Oct 2003 Location: in the shop TLCA# 1856 Posts: 13,939	.023 solid core for sheet metal...

02-19-08, 11:00 PM	#4
bluedager4114 IH8MUD Junior Join Date: Dec 2007 Location: Tucson Posts: 76	thanks guys