OEM soft top parts needed

ClemsonCruiser · 05-05-08, 08:53 AM

Looking for some parts to finish up my soft top install....... I need parts number 170 (2) and 175 (2) in the diagram below, also could use the 12 factory footman loops. Any help is appreicated

JP

foxfab · 05-06-08, 09:08 PM

hmmm, I might be able to build you a reproduction set of the 170's when I get my truck back. I have later 175's with slots on both ends. PM me if interested.

Living in the Past · 05-07-08, 09:39 PM

I got 170 in two and four mounting holes, which type do you need. They changed between 70/71 I think.

John

ClemsonCruiser · 05-28-08, 10:31 PM

bump still looking for some 170's

65swb45 · 05-28-08, 11:33 PM

I have some too JP.

ClemsonCruiser · 05-29-08, 01:35 PM

Quote:

Originally Posted by 65swb45

I have some too JP.

PM sent; thanks Mark!

huston53 · 05-31-08, 05:06 PM

I have some footman loops if you need them still. just let me know.
thanks

santacruzer · 05-31-08, 10:02 PM

If you don't need OEM footman loops, there's an outfit called strapworks.com that sells an excellent product and reasonably...as in $1.25 each when I bought mine in early '06. And they come powdercoated. I happened to match my red 40 almost spot on.

I needed six for the quarter panels, and can't tell the difference from the ones welded on the tailgate.

Living in the Past · 06-01-08, 08:55 AM

JP are you back home? I can sent you a couple of four hole #170s if you want, just send me an address. I just need to bring them back from up north.

John

ClemsonCruiser · 06-01-08, 09:36 PM

Quote:

Originally Posted by santacruzer

If you don't need OEM footman loops, there's an outfit called strapworks.com that sells an excellent product and reasonably...as in $1.25 each when I bought mine in early '06. And they come powdercoated. I happened to match my red 40 almost spot on.

I needed six for the quarter panels, and can't tell the difference from the ones welded on the tailgate.

thanks for the info santacruzer, I might just go this route

ClemsonCruiser · 06-17-08, 07:45 PM

still looking

Living in the Past · 06-17-08, 08:56 PM

You still looking for the #170? Iwas just up north where I have them stored for now. You'll have to wait until I go north again.

John

ClemsonCruiser · 06-18-08, 01:38 PM

Quote:

Originally Posted by Living in the Past

You still looking for the #170? Iwas just up north where I have them stored for now. You'll have to wait until I go north again.

John

John I am still looking for the 170's; have you recieved any of my PM's? Sent you a couple a while back..... Thanks

JP

ClemsonCruiser · 07-02-08, 09:37 PM

still looking for the 170's.... really need them to finish up my soft top project

thanks
JP

Fast Eddy · 07-03-08, 06:21 PM

What? You could make a pair in about 10 minutes with a vise and a dremel tool. Even if you made them out of 1/2" plywood they'd work good enough while you were looking for the real deal...

I found these in a junk yard but the screws were too rusted to remove and I didn't have power for the dremel to remove them.

65swb45 · 07-11-08, 10:55 AM

Your PM box is full.

My response to your PM:[cut and pasted]

sorry I didn't get back to you. Too many irons in the fire.

http://forum.ih8mud.com/fj45-owners-...ml#post3474528

PLEASE CALL ME AT THE SHOP after August 1st if you still need this stuff. 354 PMs in my box makes me cranky.

Best

ClemsonCruiser · 07-11-08, 10:47 PM

Quote:

Originally Posted by 65swb45

Your PM box is full.

My response to your PM:[cut and pasted]

sorry I didn't get back to you. Too many irons in the fire.

http://forum.ih8mud.com/fj45-owners-...ml#post3474528

PLEASE CALL ME AT THE SHOP after August 1st if you still need this stuff. 354 PMs in my box makes me cranky.

Best

Thanks for the heads up Mark....... I will be in touch with you after the 1st

05-06-08, 09:08 PM	#2
foxfab IH8MUD Lifer Join Date: Aug 2004 Location: NK, RI TLCA# 9838 Posts: 2,072	hmmm, I might be able to build you a reproduction set of the 170's when I get my truck back. I have later 175's with slots on both ends. PM me if interested. __________________ YANKEETOYS.ORG Member of the elite FJ25 club Low range? We Don't Need No Stinkin' Low Range Why would you want to put a round tire in a square wheel well? Last edited by foxfab; 05-07-08 at 04:24 PM.

05-28-08, 10:31 PM	#4
ClemsonCruiser Slave to the Cruiser Join Date: Feb 2004 Location: Clemson, South Carolina TLCA# 14683 Posts: 4,593	bump still looking for some 170's __________________ JP Virgo 88 FJ62- gone but not forgotten 62 FJ40 stocker Clemson MAFIA a division of Upstate Cruisers

05-28-08, 11:33 PM	#5
65swb45 elder statesman Join Date: Apr 2004 Location: so cal, going 45 TLCA# 1086 Posts: 6,536	I have some too JP. __________________ A carbureted man in a fuel injected world. 65SWB45, 64LWB45, 68FJ40,72V840, 76HJ45[going],84FJ60[gone], 76K5, 73Sub454, 89Sub7.4[gone], 97Sub5.7 TLCA delegate, Trail Crew-LAC TLCA, The White Trash of the Elwood Chapter my website: http://www.marksoffroad.net

05-31-08, 10:02 PM	#8
santacruzer IH8MUD Rookie Join Date: Jan 2006 Location: SantaCruz, CA TLCA# 15464 Posts: 73	Footman Loops If you don't need OEM footman loops, there's an outfit called strapworks.com that sells an excellent product and reasonably...as in $1.25 each when I bought mine in early '06. And they come powdercoated. I happened to match my red 40 almost spot on. I needed six for the quarter panels, and can't tell the difference from the ones welded on the tailgate.

06-17-08, 07:45 PM	#11
ClemsonCruiser Slave to the Cruiser Join Date: Feb 2004 Location: Clemson, South Carolina TLCA# 14683 Posts: 4,593	still looking __________________ JP Virgo 88 FJ62- gone but not forgotten 62 FJ40 stocker Clemson MAFIA a division of Upstate Cruisers

05-05-08, 08:53 AM	#1
ClemsonCruiser Slave to the Cruiser Join Date: Feb 2004 Location: Clemson, South Carolina TLCA# 14683 Posts: 4,593	OEM soft top parts needed Looking for some parts to finish up my soft top install....... I need parts number 170 (2) and 175 (2) in the diagram below, also could use the 12 factory footman loops. Any help is appreicated JP Attached Images __________________ JP Virgo 88 FJ62- gone but not forgotten 62 FJ40 stocker Clemson MAFIA a division of Upstate Cruisers

05-07-08, 09:39 PM	#3
Living in the Past IH8MUD Addict Join Date: Apr 2005 Location: Phoenix,AZ but it's a dry heat Posts: 1,475	I got 170 in two and four mounting holes, which type do you need. They changed between 70/71 I think. John

05-31-08, 05:06 PM	#7
huston53 IH8MUD Regular Join Date: Dec 2004 Location: Atlanta, GA Posts: 498	I have some footman loops if you need them still. just let me know. thanks

06-01-08, 08:55 AM	#9
Living in the Past IH8MUD Addict Join Date: Apr 2005 Location: Phoenix,AZ but it's a dry heat Posts: 1,475	JP are you back home? I can sent you a couple of four hole #170s if you want, just send me an address. I just need to bring them back from up north. John

06-17-08, 08:56 PM	#12
Living in the Past IH8MUD Addict Join Date: Apr 2005 Location: Phoenix,AZ but it's a dry heat Posts: 1,475	You still looking for the #170? Iwas just up north where I have them stored for now. You'll have to wait until I go north again. John

07-02-08, 09:37 PM	#14
ClemsonCruiser Slave to the Cruiser Join Date: Feb 2004 Location: Clemson, South Carolina TLCA# 14683 Posts: 4,593	still looking for the 170's.... really need them to finish up my soft top project thanks JP __________________ JP Virgo 88 FJ62- gone but not forgotten 62 FJ40 stocker Clemson MAFIA a division of Upstate Cruisers

07-03-08, 06:21 PM	#15
Fast Eddy IH8MUD Lifer Join Date: Apr 2006 Location: Morgan Hill, CA TLCA# 18155 Posts: 2,804	What? You could make a pair in about 10 minutes with a vise and a dremel tool. Even if you made them out of 1/2" plywood they'd work good enough while you were looking for the real deal... I found these in a junk yard but the screws were too rusted to remove and I didn't have power for the dremel to remove them. __________________ トヨタさん、ありがとうございました。 My '78 FJ40 - '73 and '78 FJ40 parts FS - WTB:Olive (653) Bib and Windshield frame -- Originally Posted by OZCAL Woke up the next day with a partially detached retina, wrapped in a sheet on a wooden floor, in a storeroom upstairs from a barbershop.

07-11-08, 10:55 AM	#16
65swb45 elder statesman Join Date: Apr 2004 Location: so cal, going 45 TLCA# 1086 Posts: 6,536	Your PM box is full. My response to your PM:[cut and pasted] sorry I didn't get back to you. Too many irons in the fire. http://forum.ih8mud.com/fj45-owners-...ml#post3474528 PLEASE CALL ME AT THE SHOP after August 1st if you still need this stuff. 354 PMs in my box makes me cranky. Best __________________ A carbureted man in a fuel injected world. 65SWB45, 64LWB45, 68FJ40,72V840, 76HJ45[going],84FJ60[gone], 76K5, 73Sub454, 89Sub7.4[gone], 97Sub5.7 TLCA delegate, Trail Crew-LAC TLCA, The White Trash of the Elwood Chapter my website: http://www.marksoffroad.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode