Buyin', Sellin', Tradin'

[84yota4x4]

I'm looking for a rear diff. 4:11 gears in a '84 cruiser.

Mine needs rebuilding but I just don't have the time/tools as I am here at school. I am willing to pay a bit more for a locker or a welded diff but I don't have a lot of $$ as it is.
If you want to trade for my old diff. I'm cool with that too.

Thanks
Brian

[Hugh Heifer]

SOLD

Have a full set (front and rear) FJ40 springs. I took them apart and POR 15ed them. The rears have add a leaf in them. $75 for the set if you come get them.

Springs are sold.

[mudnyreye]

I need a 75+ wind shield frame. And an old Saginaw PS box for a core. Thanks, Cary

[sseaman]

I have 2 15" steel wheels, here is the link to my other post. GONE

Make an offer.

http://forum.ih8mud.com/sale-tires-w...-tn-%2450.html

[sseaman]

Looking for a 1st Gen 4runner in decent shape within a few hours of Nashville. Let me know what you have.

[chattfj40]

need a new windshield frame for the 40...late model...

[mudnyreye]

I have a '83 FJ60 in North GA (lake Alatoona). 255K, was a daily driver up til last Feb. Stock except for 38mm Weber/Header. Needs PS Gearbox/Pump, Tires, Exhaust work. $2000 or best offer. Not interested in parting. Thanks, Cary

[DSLTOY]

Originally Posted by mudnyreye

I have a '83 FJ60 in North GA (lake Alatoona). 255K, was a daily driver up til last Feb. Stock except for 38mm Weber/Header. Needs PS Gearbox/Pump, Tires, Exhaust work. $2000 or best offer. Not interested in parting. Thanks, Cary

How good is the body?

[mudnyreye]

You have seen it Roger. Rust on the bottom gate. dents everywhere. Thus the price.

[sseaman]

Looking for 32x11.5x15, let me know what you have.

[mookie]

http://forum.ih8mud.com/sale-parts/2...nt-bumper.html

[Hugh Heifer]

I am going to have a decent running F motor available soon. I took it out of the trail rig, replaced all the major seals and put it in the frame off for mock up but with intention of using it until I rebuilt the 2F from the parts 60. That was until I scored a free 2F with about 165K on it.

I do not know the numbers and have not leak tested it. It was a rebuild. I do not know the hours or miles on the motor. It ran strong when I got the trail rig but smoked a bit on start up. No accessories but a dizzy. Just the motor. It has a new oil pan gasket and I cleaned and POR15ed the oil pan while it was off. I also painted the side cover and valve cover. All new seals there plus rear main. I have done nothing with the front main of flywheel cover.

I am willing to ship it. I would like $100 for the motor. Shipping is about $215+/- based on a recent experience. I am willing to deliver it between ATL and Manchester/Chattanooga or come get it.

Oh - and a gallon bottle of Jim Beam Black.

[Hugh Heifer]

79 FJ40 Tub in Jackson on Ebay for cheap.
No affiliation

TOYOTA FJ-40 FJ40 LANDCRUISER BODY TUB SHEET METAL:eBay Motors (item 270397518843 end time Jun-02-09 08:59:33 PDT)

[LDowney]

Originally Posted by Hugh Heifer

79 FJ40 Tub in Jackson on Ebay for cheap.
No affiliation

TOYOTA FJ-40 FJ40 LANDCRUISER BODY TUB SHEET METAL:eBay Motors (item 270397518843 end time Jun-02-09 08:59:33 PDT)

The tub is not off a '79. The pictures clearly show that the tub is from an earlier model where the gas tank is under the passenger seat. I don't know if this is a good thing because it reflects that the seller does not know what they are posting or does & is trying to pull something. Regardless, more members have earlier models trucks so there may be more interest because it is not a '79. If so, good luck.

[Hugh Heifer]

Originally Posted by LDowney

The tub is not off a '79. The pictures clearly show that the tub is from an earlier model where the gas tank is under the passenger seat. I don't know if this is a good thing because it reflects that the seller does not know what they are posting or does & is trying to pull something. Regardless, more members have earlier models trucks so there may be more interest because it is not a '79. If so, good luck.

10-4 there. I think the change was actually in '79 making it model year '80 but manufactured in '79. Maybe it is a '78.

[Extreme4x4]

Items I have for sale or trade.

Ford 8.8 rearend, welded, stock gears, out of a 92 ford explorer
Set of 35" BFG's, 2 are 80% tred, 2 are worn uneven from being out of alignment.
2 sets of braided procomp brake lines. I'll find out what all they will work on if someone is interested.
1 chevy 350 engine someone can HAVE for parts out of a 79 full size pick up. compression test appeared to be all over the charts IMO. Come take it away.
Set of 33" Toyo mud terrains. 2 90% tred, 2 20% tred/uneven. would sell cheap/trade
A couple sets of coils 4" lift coils for a Cherokee and 6" lift coils.

I'll add some more if I think of it. . .

[Clutchee]

Originally Posted by Extreme4x4

Items I have for sale or trade.

Ford 8.8 rearend, welded, stock gears, out of a 92 ford explorer
Set of 35" BFG's, 2 are 80% tred, 2 are worn uneven from being out of alignment.
2 sets of braided procomp brake lines. I'll find out what all they will work on if someone is interested.
1 chevy 350 engine someone can HAVE for parts out of a 79 full size pick up. compression test appeared to be all over the charts IMO. Come take it away.
Set of 33" Toyo mud terrains. 2 90% tred, 2 20% tred/uneven. would sell cheap/trade
A couple sets of coils 4" lift coils for a Cherokee and 6" lift coils.

I'll add some more if I think of it. . .

I'll take the engine. You have a PM!

[BGarcia88FJ62]

Originally Posted by Hugh Heifer

I am going to have a decent running F motor available soon. I took it out of the trail rig, replaced all the major seals and put it in the frame off for mock up but with intention of using it until I rebuilt the 2F from the parts 60. That was until I scored a free 2F with about 165K on it.

I do not know the numbers and have not leak tested it. It was a rebuild. I do not know the hours or miles on the motor. It ran strong when I got the trail rig but smoked a bit on start up. No accessories but a dizzy. Just the motor. It has a new oil pan gasket and I cleaned and POR15ed the oil pan while it was off. I also painted the side cover and valve cover. All new seals there plus rear main. I have done nothing with the front main of flywheel cover.

I am willing to ship it. I would like $100 for the motor. Shipping is about $215+/- based on a recent experience. I am willing to deliver it between ATL and Manchester/Chattanooga or come get it.

Oh - and a gallon bottle of Jim Beam Black.

You still got this.. I'm interested and can pick it up .

[Hugh Heifer]

Originally Posted by BGarcia88FJ62

You still got this.. I'm interested and can pick it up .

Were you interested in the F? I thought you wanted a 2F - I am not sure if this post pre-dates the PM.

[n2hcky]

Hello all
I thought I wanted a jeep but they are everywhere.
Used to work for Toyota back in the mid 80's and always liked the 40's.
Figure it is about time to feed the fever.

Does anyone know of a decent FJ40 in the area?
I am in Dalton.
Prefer to trade my motorcycle but may have to wait until I sell another toy.
Looking for something in the $6,000 range.

Bike is a 2005 Triumph Sprint ST1050.....loaded...less than 10k miles.

Or my other toy
http://forum.ih8mud.com/vehicles-tra...ml#post4575174

[dsrule]

FJ60 ARB Bull Bar with side rails/steps - $500. SOLD
Fj60 Custom made Lobsterfab rear bumper with side rails - $250 SOLD
These two make a really nice protective package for an FJ60!

NEW!!! 76 & later FJ40 Stock Toyota power steering pump, engine mounting bracket, steering gear and high pressure line. An easy way to add PS if you don't have torches and welding equipment!

IPF 900s off road lights with wiring harness & relay - $100

Superwinch X9 9,000 lb winch - $400

Five 35 X 13.50 Mickey Thompson Baja Claw tires and 12" rims - $500 Four of the tires are at 70% tread and one is at 90%.

'76 FJ40 disk brake front axle - needs rotors - good 4:11 third member - $250

76 FJ40 Gas tank - $75

76 FJ40 Gas tank cover -$50

76 FJ40 Tranny cover - $60 SOLD

76 2F starter $20

76 2F H2O pump $20

76 FJ60 Tranny & tcase - came from parts truck, condition unknown

Aftermarket Shorty front bumper & winch mount - $100 SOLD

FJ40 third member 4:11 gears, large splines - $50

Photos available of any item.

Paypal or cash

Located at zipcode 37777

My phone number is 865-680-3612 cell

Thanks! David

Additional items:

8” wide Tuffy Console with stereo compartment - $150 SOLD

2 Corbeau bucket seats – good condition, need an FJ60 front seat in exchange -$150 SOLD

Mean Green High Output alternator – need a functional FJ60 alternator in exchange - $100 SOLD

Fj60 Custom made Lobsterfab rear bumper with side rails - $250 SOLD

[Goode]

PM sent on bumpers.

[Hugh Heifer]

Originally Posted by n2hcky

Hello all
I thought I wanted a jeep but they are everywhere.
Used to work for Toyota back in the mid 80's and always liked the 40's.
Figure it is about time to feed the fever.

Does anyone know of a decent FJ40 in the area?
I am in Dalton.
Prefer to trade my motorcycle but may have to wait until I sell another toy.
Looking for something in the $6,000 range.

Bike is a 2005 Triumph Sprint ST1050.....loaded...less than 10k miles.

Or my other toy
http://forum.ih8mud.com/vehicles-tra...ml#post4575174

I am in Rome and will help you look for one.

[Hugh Heifer]

Originally Posted by dsrule

FJ60 ARB Bull Bar with side rails/steps - $500.
Fj60 Custom made Lobsterfab rear bumper with side rails - $250
These two make a really nice protective package for an FJ60!

IPF 900s off road lights with wiring harness & relay - $100

Superwinch X9 9,000 lb winch - $400

Five 35 X 13.50 Mickey Thompson Baja Claw tires and 12" rims - $500 or $400 with trade of FJ60 compatible wheels & any size worn out tires (must hold air). Four of the tires are at 70% tread and one is new.

'76 FJ40 disk brake front axle - needs rotors - good 4:11 third member - $250

76 FJ40 Gas tank - $75

76 FJ40 Gas tank cover -$50

76 FJ40 Tranny cover - $60

76 2F starter $20

76 2F H2O pump $20

76 FJ60 Tranny & tcase - came from parts truck, condition unknown

Aftermarket Shorty front bumper & winch mount - $100

FJ40 third member 4:11 gears, large splines - $50

Photos available of any item.

Paypal or cash

Located at zipcode 37777

My phone number is 865-680-3612 cell

Thanks! David

Additional items:

8” wide Tuffy Console with stereo compartment - $150

2 Corbeau bucket seats – good condition, need an FJ60 front seat in exchange -$150

Mean Green High Output alternator – need a functional FJ60 alternator in exchange - $100

Fj60 Custom made Lobsterfab rear bumper with side rails - $250

PM sent on the "shorty bumper"

[werd]

WANTED: I am looking for a 55 series steering column.

Thanks,
Howard

[romegadave]

Howard,

PM nuclearlemon.....she had one from a 75 pig for 15 bux if not sold. HTH, Dave

[radioridge]

Originally Posted by werd

WANTED: I am looking for a 55 series steering column.

Thanks,
Howard

What you gonna do with that?

[FJDirty]

I have a 91 FJ80 (170,000 mi) that I bought a year ago....sitting right now with blown transmission- I'm sure the planetary gear broke.
I am either looking for another transmission or to sell the truck outright- I want to buy a 93 with the 4.5L engine, but don't really have the cash to fork out....I may consider swapping a used tranny if I can find one at a good price.
Otherwise, if someone offered me $2000 right now I'd sell the truck- it has lots of great parts. The engine runs great (no compression specs) and starts flawlessly every time. The axles, and birfields are in good condition (one of the wheel seals are leaking a bit). The body is intact but had an accident on the front driver side many years ago- the repair was poor and the subsequent paint (and bondo) job is not that great- I was planning on wrapping it. Everything else works great, the 4wd, diff locks, electronics, etc and interior is OK. It has 33" Super swampers with 60% tread.
If you know where I can find a good used (preferably tested) transmission I would love to fix the truck. I won't spend $3,000 on a rebuild. If someone's interested in buying the truck I would also sell it, but not for less than $2,000.

[DSLTOY]

Originally Posted by radioridge

What you gonna do with that?

He is doing the FJ-60 power sreering conversion on his 40.

[Hugh Heifer]

Hey guys!
I have recently removed these from the frame off (I was using them as rollarounds)
I had them sandblasted and then powder coated Slate Gray. It is a very nice gray nearly like the stock wheel color on a 40.
These are like brand new. 15x7 Toyota 6 on pattern and a 4 inch offset. They will accept factory discs as I had them on the 60 I was parting out too.

I am starting out asking $300 since I went to all the trouble of fixin' them up (I am OCD and figured if they were in the garage they needed to be shinny) but am open to offers and trades. (For what? I dunno! Whatcha got?)







The black stripe is POR 15. When the wheels are hung at the powder coater, a small amount of metal showed through where the wire was so I simple ran some POR 15 around them to ensure they were completely encapsulated.

Wheels are in Rome.