My temp gauge flat lines sometimes. Usually it is working fine, but not always. I insulated the wire with some electrical tape and it worked for a couple weeks, now it's back. I'm thinking of splicing in a new wire and connector where it comes out of the water pump. Have any other 3fe guys out there dealt with this before?
Also, Seems like the idle is worse when it cuts out. I toggled the wire yesterday when idling warm and couldn't get it to come to life.
Thanks much
Also, Seems like the idle is worse when it cuts out. I toggled the wire yesterday when idling warm and couldn't get it to come to life.
Thanks much