1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Line-Xing

Discussion in '80-Series Tech' started by Keep, Apr 21, 2003.

  1. Keep

    Keep

    Messages:
    251
    Likes Received:
    1
    Joined:
    Mar 27, 2003
    Location:
    Chapel Hill, NC
    Following Curran's comments about Line-Xing rocker panels I've decided to spray them and the mirrors (but with Duplicolor spray on bedliner). Before I rip the mirrors off is there anything I should be aware of... difficulty removing, tricks, etc?
     
  2. landtoy80

    landtoy80

    Messages:
    5,668
    Likes Received:
    241
    Joined:
    Mar 13, 2003
    Location:
    North Front Range, CO
    I did the bed liner to rocker panel on the 60 and it worked great. I painted over it per directions. The stuff won't stick to bondo. I can't help with mirrors.
    kurt
     
  3. cruiserdan

    cruiserdan SupportingVendor Emeritus Supporting Vendor Moderator

    Messages:
    20,603
    Likes Received:
    2,981
    Joined:
    Mar 27, 2003
    Location:
    Surrounded by Cruisers from all over the world
    Keep,

    In order to remove the mirrors you will need to remove the interior door panels to get to the wires to unplug them. Also you will need to pry the black triangle thingys off as well. They will probably break but new ones are available.

    Regards.....Dan :beer: