How do I reset the maint req light ? 06 Highlander

Discussion in '95+ Gen Toyota Trucks' started by Zack1978, Dec 14, 2006.

  1. Zack1978

    Zack1978 SILVER Star

    Messages:
    2,582
    Hey everyone,
    Changed the oil myself on the new Highlander, however the maint req light is on. The oil was done of course, but how do I reset the dash light? Anyone?

    Thanks,
    Zack
  2. Junk

    Junk

    Messages:
    6,210
    Location:
    buggerville nj
    Shoot the ****ing thing.
  3. cruiserhead

    cruiserhead

    Messages:
    693
    Location:
    North Jersey
    I don`t think you can discharge a firearm in West Milford,unless your shooting deer.
  4. wob

    wob

    Messages:
    2,531
    Location:
    SC
    It's in the owners manual.
  5. yooper

    yooper SILVER Star

    Messages:
    4,114
  6. Koffer

    Koffer SILVER Star

    Messages:
    2,215
    Location:
    Hopewell NJ 08525
    here you go
    Turn ignition key to 'ON' and press the odometer button until the display reads actual mileage... not Trip A or B.

    Turn ignition key to OFF.

    Hold in the same button you used in step 1.

    While holding the button in, turn ignition key to 'ON'.

    The 'Maint Reqd' light should blink and go out.
  7. Zack1978

    Zack1978 SILVER Star

    Messages:
    2,582
    Nope not in there.

    Zack
  8. Zack1978

    Zack1978 SILVER Star

    Messages:
    2,582
    Thank you I will try it.


    Zack
  9. MarkReye1

    MarkReye1

    Messages:
    324
    Location:
    Pompano Beach
    Use a silencer. It works wonders or use sub sonic ammo.

    Mark

Share This Page