Factory clock - replaced to change color (1 Viewer)

[treerootCO]

Finally found a replacement clock for the 80 that was blue

The ':' is there, the pic was taken between the blinks.

After:


Before:


Inside the dash. You can see the wires are conveniently labeled

 

[treerootCO]

eBay - 12V Blue LED Digital Electric Clock For Car Motorcycle 12v car clock blue led

Seller info so we can track it after the link above expires
goodstore.2012



The button is for setting the time. I ran it into the glove box so it was hidden.


This is the inside of the factory clock

 

[treerootCO]

Cut a hole in the back to flush mount the display to the front plastic bit.


Green = negative. Wired that to E(-)
Red = constant power. Wired that to B(+)
Black = switched power. Wired that tp ACC(+)

All are marked on the back of the clock. With the wires soldered to the pins inside, the factory plug is still used. The dimmer is not supported with this model....maybe later I'll figure out a way to make that work too.
You can see in this pic the H M :00 was removed and the plastic polished with plastic polish.


Used an old soldering iron to plastic weld the two together using the part I cut out as filler.

 

[fj4068]

6:46 in blue. Good work.

 

[bamachem]

Geeze. how long did THAT take? (lemme guess, 5hrs 26min... )

 

[ERG80]

Nice work.


LOL at the time

View attachment 571483

 

[Korasher]

Very Nice. Add it to the FAQ under "BLING" so i reference this one day...

 

[Gorilla]

Too bad this seller is not Ebay Registered anymore. Pretty cool mod!!!

 

[DARKNESS]

Looks like you can still get them on Amazon:

http://www.amazon.com/12v-Digital-Electric-Clock-Motorcycle/dp/B009SKI03M

 

[nigelsiam]

Looks nice...it is so hard to read the stock clock with any amount of sunlight interference. Good mod