80 Series Interior Tire Carrier and Mount (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

LandCruiserPhil

Peter Pan Syndrome
Supporting Vendor
Joined
Mar 10, 2004
Threads
1,111
Messages
25,242
Location
Scottsdale Arizona

Comes as a system only – Tire Carrier and mount

Includes all hardware and strap for a solid installation

Shipped bare raw metal

Carrier is designed to fit a 315 tire – other widths available by request.

The system ship in a 18”x18”x24” box

80 series floor height varies you will be required to drill 2 - ½” holes and install a L bracket prior to using the tire carrier. The L bracket is an absolute must for a solid installation.

Previous write up on our prototype linked below. The production version varies slightly from the prototype. Nothing you would notice without a tape measure being side by side.

https://forum.ih8mud.com/threads/an-interior-tire-carrier.830623/

Pricing –
If you are one of the current 50 PUMA Mount owners yours carrier is available at $200.00 shipping now included to the lower 48 states. Our thanks to you for supporting us.

The complete system(mount & carrier) is available at $345.00 shipping now included to the lower 48 states. Other shipping locations available by request.

Available now with immediate shipping!
(Shipping now included for easy ordering)
Click HERE




image5.jpg
image6.jpg
image9.jpg
image12.jpg
 
Last edited:
I should have bought a mount to save the $5. :flipoff2:
 
(and YES I will be buying a mount once some other projects get completed ;) )
 
I'm in Phil, I bought BOTH sides for the Puma mount! I only need the passenger side for the tire mount though. Where can I pick it up locally? I'll send you an order once I get paid on Friday.
 
I'm in Phil, I bought BOTH sides for the Puma mount! I only need the passenger side for the tire mount though. Where can I pick it up locally after I get paid Friday?

I will need to get a passengers side made up. I will keep you updated via PM.
 
I'm in, PM sent.

Thanks!
 
Spent the day painting and installing my new Interior Tire Carrier & Puma Mount. Both items are manufactured very nicely and the quality is superb.

Fit and finish was spot on.

Thanks for making me a custom 11.25" width carrier, it is perfect! Now I need to get a Pump Compressor....

Thanks a lot Phil. Nice job on these units.

http://i1312.photobucket.com/albums/t536/pkweinert/photo 4_zpsftcw8bcb.jpg
http://i1312.photobucket.com/albums/t536/pkweinert/photo 1_zpsxozlnpt1.jpg
http://i1312.photobucket.com/albums/t536/pkweinert/photo 3_zps0pt7gxub.jpg
 
Just wrapped up my install. Fantastic mount! All the mount holes line up perfect, this thing is solid. Tire fits nice and snug with no wiggle room and the upsized strap makes sure nothing moves. I already have an air system installed so I elected to use the puma mount as a storage compartment for my recovery gear.
Thanks Phil, nice work!

143.jpg


141.jpg


167.jpg


165.jpg
 
Just wrapped up my install. Fantastic mount! All the mount holes line up perfect, this thing is solid. Tire fits nice and snug with no wiggle room and the upsized strap makes sure nothing moves. I already have an air system installed so I elected to use the puma mount as a storage compartment for my recovery gear.
Thanks Phil, nice work!

Thanks for the positive feedback:clap:
 

Users who are viewing this thread

Back
Top Bottom