Search results for query: *

Forum search Google search

  1. C

    coil over cruiser

    Peter, I am located in Craig. The cruiser is here in town at a local towing buisness setting on the tailer. If you would rather see it personaly it will be at Arrowhead towing on the north side of town. Thanks
  2. C

    coil over cruiser

    For sale in N.W. Colorado 73 FJ40 350 chevy sm465 w/3spd t/c (spare t/c, not complete but good) 529 gears welded rear lockright front (spare lockright also) stock fj axles with mini truck disc conversion, saginaw power steering rear frame is tubed with cage...
  3. C

    Interchangeable?

    Howdy all, I am looking at buying a 76 FJ that is pretty much stock. I currently have a 73 that I have done a complete 4 bar f/r with coilovers. My question is will the suspension 2.5 inch lift I took off the 73 go on the 76 also will the lockright out of the 73 work in the 76. I have also...
  4. C

    half tube buggy

    72cruiser, I cut and tubed the rear of my 73 FJ40. I tied in the 4 bar to the frame and the coilovers to the tube frame. I came off the top of my cage down to the back of the tubed section with my rear kickers. When we cut the frame we tapered it and use heavy wall 2x4 rect. tube to tie the...
  5. C

    Cruise MOAB?

    Thats what I get for believing what I read. Oh well I will be with a bunch of j**ps then anyway. I wouldnt want my fellow cruiserheads to see me that way. :-[I am planning on going back over memorial weekend also if I stay in one piece the first trip. :G
  6. C

    Clutch is poochin

    You wont be dissapointed with the centerforce. I just ordered one from where I work for my 94 f250 also. :G
  7. C

    Clutch is poochin

    If you end up changing the clutch I would go with a centerforce. I have ran one on my 73 with 350 chev and 3 speed. I ran 38inch swamper with the stock 410 gears ( I know not a smart move.) and smoked it several times. I had it so hot that it was actualy smokin. But it never gave me any...
  8. C

    Cruise MOAB?

    I was wondering if anyone is going to Cruise MOAB? I just renewed my tlca membership a few days ago and was just wondering. I am going to be in Moab the 9th thru the 13th of may and see on the calander its the same time. I would be interested in maybe meeting some of you all if you are there. I...
  9. C

    Welding rear end (and changing it out?)

    Heres my $.02 worth. If you are going to use your cruisers as DD then a lunchbox locker is a better bet. I ran a lockright in the rear for a year and it worked fine. If you drive it right there is little diffrence between open and a lockright. Yes it does have a funny ratchet noise when...
  10. C

    roaring noise???

    Does the noise go away with the clutch in or out. I have (had) a 3spd 350 combo and had trouble with pilot bushings. I had a bushing at first but it must have spun and had to replace. I went with a pilot bearing second time. Lasted about a year. I am in the middle of a 465 swap now and when I...
  11. C

    sm465 transfer case adaptor

    I am finishing up a SM465 with the CC adapter right now. I went ahead and got the output shaft from them also. My trans was a 10 spl. 4x4 already but I figured might as well get the right parts to do it right anyway. The only problem I have come across is my original set up was the 3 spd with...
  12. C

    33 or 35

    I ran 35s with a lockright in the front w/o power for a while. As long as you were moving it wasnt that bad. But power made it a whole lot better. 35's REDNECK ? Im runnin 38's and wouldnt trade them for all the 33's out there. :D
  13. C

    Lock Right versus PowerTrax No-Slip

    If you are going to be on ice an snow pack I wouldn't suggest either. I had lockrights in my 73 FJ and on ice and slick roads it had a tendency to push the front end in 2wd. I had to run 4wd to make a lot of corners. Also if there is a slight slope to the road the rear will try to slide in the...
  14. C

    529 gears

    This was on the front. You are right about the rear though. I have the semi float and the 529 gears make it all but impossible to run a locker. I was running a lockright and when I installed the ring is so thick you cant remove the cross shaft. I saw on Randys R&P tech section about grinding the...
  15. C

    529 gears

    I was out playing in the snow last weekend with the cruiser. It wasnt the first time this year either. I had gone out a couple of times prior and realy rodded the cruiser. Anyway last weekend while breaking trail I was digging pretty hard when it sounded like a shotgun went off. One of the guys...
  16. C

    2 1/2" Lift Kits and Shocks

    Just my 2 cents. I installed a super lift about a year ago. It made my cruiser ride like a buck board and had zero flex. Needless to say the kit is laying in my shed taking up space now.
  17. C

    For Sale SM465 adapter etc.

    I am interested in the driveshafts. What year are they from?
Back
Top Bottom