Search results for query: *

Forum search Google search

  1. dozerking

    Seat upgrades

    I put in some seats out of a 2008 bmw they are black leather power and heat they are awesomely comfortable they do sit pretty high and im tall but I love it!! You will have to build a bracket for them but it only took me 1 hour to build the both of them! plus I only paid 200 bucks for them!!
  2. dozerking

    New V8 troubleshoot

    I had a clicking noise coming from my bellhousing when I first did my swap it was the clutch not being setup right you prolly have the same problem! when you put that tranny back in take extra time and make sure its perfect! and make sure you put the right oil in that tranny!! If there is a...
  3. dozerking

    ZERO heat from heater...what should I try next???

    My heater would always quit working when it got cold out every single time when it hit single digits no heat! when I first got my landcruiser I didn't know much about them so the first thing I did was change the thermo stat I put it back together the same way I took it apart! But the guy I...
  4. dozerking

    Puma in a 60

    nice mount! im all for using what u got!!
  5. dozerking

    V8 conversion overheating at highway speeds

    elbert I disagree with the last thing you said my motor has never run cooler than with my flex fan and at highway speeds like he is saying the flex fan should be pushing more than enough air but that's just my opinion! You should post a few pics of your engine bay and rad/fan shroud and all that...
  6. dozerking

    V8 conversion overheating at highway speeds

    Have you shot the motor with a temp gun to make sure it is reading pretty close to what your gauges say? how hot is it where you are when it over heats? If you shoot it with a temp gauge check both upper and lower hoses and see what the difference is when the water cycles they may have messed up...
  7. dozerking

    NV4500 & Chevy v8

    You have a long road ahead of you if your this worried about the bellhousing! take a deep breath and relax:beer:
  8. dozerking

    NV4500 & Chevy v8

    I run the AA bell housing it works awesome if you use it then you can use your stock master/slave combo! I also used a center force stage 1 clutch with the lc throw out bearing I got from AA the throw out bearing from a lc is twice as big as a chevy and the center force has a very short throw...
  9. dozerking

    V8 help on the shifters

    I am pretty awesome;)
  10. dozerking

    V8 help on the shifters

    i wish i had this picture when i did mine! Im not gonna lie its been over a year since i did mine so im not a 100% clear. So i told you to take #6 and turn it upside down your pic says your is right i turned mine for whatever reason but it reallt shouldn't matter either way you need to take #45...
  11. dozerking

    V8 help on the shifters

    ohhhh now that I look at your pics alittle closer the slope your talking about is the same peace I was missing it stumped me like crazy I ended up going to the hardware store and buying a brass bushing that fit perfect in there haven't had a single problem with it since!!
  12. dozerking

    V8 help on the shifters

    yaaa yours isn't hooked up right!! you shouldn't even be close to the braket with the two bolts in it! it took me awhile to figure out how to get mine to work properly plus I was missing one little part! It looks to me like you need to take the l shaped bracket that hooks to the shifter off and...
  13. dozerking

    V8 help on the shifters

    your shifter will go in the stock hole if I remember right I had to cut out one little notch of the floor board but it wasn't very big the boot will still cover it! You shouldn't have to bend the shifter at all but you will have to cut the tranny shifter and bend it back so it will clear the...
  14. dozerking

    Vortec V8 conversation help

    so for the nv4500 shift tower it will sit up a bit in the floor board but if u use the same shift boot for that tranny you will never notice! and yes to begin with it will come way to close to the dash but if you cut the shifter 3/4 of the way through it at the base and bend it down and towards...
  15. dozerking

    Clean Cruiser shots

    windows are tinted now among other things lol
  16. dozerking

    What wiring to keep?V8 TBI swap questions

    get a howell like I said they are very nice!! and they come with their own wiring loom I have heard painless doesn't but im not sure! they is only four things to hookup with the harness you will be done in 2 hours and on to the many many many other little things .:beer:
  17. dozerking

    What wiring to keep?V8 TBI swap questions

    there are a few rights ups on using the factory chevy harness youll just have to keep looking! looks like a real pain in the butt to me though I would just spend the 350 and buy a new plug and play from howell!!! you will need to keep the main stuff like alt, starter, xcase wiring, oil pressure...
  18. dozerking

    saginaw ps pump conversion, need help!!

    ummm in not real sure what conversion you have??? did you just buy a pump and are trying to mount it? If so you will have to make your own brackets!! give us alittle more info so we can further guide you!
  19. dozerking

    Motor Mounts

    They always puke the fuild out when your on the trails x10 when your in the snow!! When your at it and doing the work do the same for the passenger side!! I changed just the driver at first and six months later the pass. when out! I think when you fix it that it puts that's much more pressure on...
  20. dozerking

    Motor Mounts

    Do you know why it broke in the first place? It is only glued on and over time the power steering leaks like it always does and get all over your motor mount the the fluid weekens the glue and it seperates! So all you have to do is remove the mount drill a hole all the way through it then run a...
Back
Top Bottom