I have rust beginning on the lower portion of a driver's side door that needs looking after before it gets too out of control. I know on the outside I can sandblast/wire brush/POR15 treatment then prime, paint and re-apply seam sealer but, what can I do about the hidden rust that is surely in...
I have a pair of O2 sensors (front and back) that came out of a running 1997 FZJ80. SOLD
Markings on them are:
TOYOTA. 89465-60010 ND 065500-3052
TOYOTA 89455-60080 DENSO 5042
$50.00 for the pair. O2 Sensors are SOLD
I also have a Tekonsha Prodigy brake controller. Only used twice...
Have you looked into if you have a local vocational technical school near you? Depending on the school, they can do a surprisingly good job. The instructors are usually ASI certified. Paint cost isn't too bad if you use a mid grade like PPG's Omni line. Dupont has a similiar mid level line...
So, the SEM Sand Free is designed for areas where sanding isn't practical? This may be the same thing as adhesion promoter, but SEM is more than likely a higher quality product than say Rust Oleum or Dupli-Color adhesion promoters. Does anyone have first hand experience with this? The area...
The more I research the more opinions I find, when painting plastics that is. My plan of attack is this. Sand everything with 420 grit as well as I can. Clean and tack rag. Spray an adhesion promoter. Paint with Rustoleum Plastic paint. Let dry thjoroughly. Wet sand with 800 grit and then...
I'm restoring/re-freshening a 1982 Mercedes 300SD turbo diesel and she is currently in the shop getting a complete paint job. The car has lower plastic body molding that was originally painted gray from the factory. This was easy to paint glossy black. Sand, clean and I sprayed with...
I have an oak one in near perfect condition out of a 1996. Send me your Email and phone number and I'll send you some pics. Send anything to msgdhorn@yahoo.com as I am not on Mud as often as I used to be.
$80.00 and I'll pay for the shipping.
David
Sorry Wayne... I remember meeting Cruiser when I drove up from Massachusetts to pick up the 70 series dash... They truly do become family. Sorry for your loss.
I covered my 80 series with the U-Pol tintable and found that the color was no where near the darkness of the stock 97 Emerald green of my truck when applied. I used urethane paint as the tint. The tintable version of U-Pol is greyish in color and it makes sense that it will lighten any...
All parts came out of a perfectly running 1997 FZJ80 with 97,000 miles.
Driver's side air bag. $100.00 Color is oak. In perfect condition. SOLD
Engine ECU $100.00.
Pair of O2 sensors. $100.00
I can take and send pictures to serious buyers.
Best offers accepted and I will...
These have been sitting around and I'm hoping to find a new home for them. The parts are located in Athol, MA and are for local pick up only or possible meeting someplace.
4 chrome rims off a 1988 FJ62. Very nice condition. Come with tires. $100.00
1988 FJ62 Hood. Very faded red, but...
My tires arrived today. Initial impressions are good. I like the bead to bead retreading they are using now. Not sure if it will increase reliability or not. The tread measured 17/32nd and looks like the perfect level of aggression for my needs. Not sure what a 265/75R16 tire weights in...
I ended up going with Dupli-Color self etching primer and VHT Satin Black and clear coat. I also bought some 3M stripping/scuffing pads. One "Moderate Stripping" for the initial scuffing followed up by "Between Coats" scuffing pad.
I will be refinishing some aluminum rims and need advice and or opinions from those with more knowledge than me on what paint (not going the powder coat route) is best for the rims.
The product will be a spray can...
Self Etching primer for stripped rims? VHT, Dupli-Color, Rustoleum, SEM...
More advice needed... I can request what tire brand (Goodyear, BFG, Michelin, ETC) the tires have as a casing and was wondering if one brand over the other is designed better. Stronger sidewalls are the main thing that comes to mind.
After doing as much research as I can stand I'm going to order the Sentinels in 265/75R16. If it matters Treadwright is now retreading not only the tread area, but the entire sidewall. I'll post pics and my opinions when I finally get them. And will also be balancing with Dyna beads. I have...
Has anyone had any experience, good or not so good, running Treadwright tires? My main focus is on-road performance and tread wear in all weather conditions including snow with a small amount of light off-roading. I am considering their Sentinel B2B A/T or Warden A/T. Each tire is $113.00...
Selling a set of OEM Toyota belts. All brand new and the Alternator belts are a matched set. $40.00 plus shipping. Email me at msgdhorn@yahoo.com as I'm not on mud much any more.
SOLD.