looks Awesome!!
anything in kit form or in house only still?
is the reason for not doing a kit liability?
the rear of our 45 is air bags but still using stage coach front suspension!
need to get the front end coiled
ok I feel like this is something that has probably bin beat to death but here goes.
Why is there a little hole in the windshield wiper motor cover?
there doesnt seem to be anything behind it you would need access to.
its right in the line of fire for rain to get in!
ok thanks for checking that out rosco
according to my gauge even going downhill for a long time it never driops below 190
so hopefully its just a little out of line
brownbear thanks for the tip I have a feeling it could be a pretty stiff batch of coolant in there I will alao check that out
ok so just pulled from 330 meters to 1260 meters above sea level its +30 c and the temp just touched 210 according to gauge
I will double check my gauge accuracy
just wondering if a cooler T stat was used in hotter countries then Canada?
does anyone know if there is more then one thermostat for the 13BT?
I am running a mechanical water temp gauge and the temp seems to always live in that 190 to 200 f range
was thinking possibly in some markets they might have installed a cooler thermostat like a 180
thoughts?
ya I realize it will never be Lexus quiet but I just enjoy trying to make old better then new.....
typically I am my own worst enemy !
just got back from Toyota and ordered two new bj70 motor mounts
I will make some new mounts that come off the frame that will stiffen up the area
I think if I...
is the 13BT pretty shaky at idle? I agree once reved up a little its not bad, but I have nothing to compare it to here
the fenders are bolted straight to the frame but I do have insulators under the bib and along the little part above the fenders, also there is soft rubber between the hood and...
Thanks for the tip on the part number roscoFJ73
it seems to be all the time not just at idle
all the front body work seems to vibrate all the time
i have checked and checked and rechecked to see if something on the engine touches and it all looks good
i have tried a couple different mounts...