i will def get a hold of ya when i get a better rig shouldnt be too long.im in kirkland so woodinville and bellvue are right there.well at least im close to some cruiserheads.
shawn
i just moved to the seattle area,from colorado and im looking for places to go wheelin.
i can see that theres woods everywhere,but i dont exactly know where the trails are.
plus i sold the cruiser to move so, any easy trail is what im looking for,at least until i get another cruiser.i do have...
sounds to me like when you stabbed the shifter back in you missed the right spot.i did the same thing.
just pull the shifter out and use a flathead to jockey the thing back to nuetral and restab.
shawn
Re: 3 speed bellhousing....
i also have the bellhousing.if you need the fork,or anything else i have that too.
im assuming you need a cruiser 3spd bellhousing :dunno:.
25 bucks, plus shipping from 80012.
shawn
Re: lock right: front or rear:
reversing at full lock(wheel turned all the way).
oh and do yourself a favor.IF YOU PUT A LOCKER IN THE FRONT. DO NOT "TRY IT OUT ON DRY PAVEMENT".YOU WILL BREAK IT OR A BIRF. :slap:
that is way too much for a parts/beater truck.
unless its a driver with a rough body.if so use some body parts off of the 74 to make the 77 nicer and drive the 77 then go beat up the 74.thats what id do.
kinda sux you ended up with a 3spd in your 74, some of them 74's were awesome,4spd/4spd case...
on the 2barrel aisan carb, where does the wire that comes out of the idle selenoid connect to? is it any old 12V source or something specific. its on a desmogged 75-76?or so.it actually runs fine without it connected but i hate loose ends so please tell me where it goes to.
shawn
whoa ask and ye shall recieve! :G
well my alternator is mounted where the smog pump should be.dont know why?i got this engine desmogged from someone else.its a 2f.early,with the pop in/out oil cap.i took a look to see if i can mount the alt. on the other side but it doesnt seem like i can.
also...
i know that some say that this is a weak conversion,but i hear its somewhat bolt on.seeing that i dont have a welder and many of the other essential tools this may be the swap i need.
BUT,i cant find a how to,what i need writeup anywhere.i know pinhead has this done and claims that is does...
Re: Gas Pedal & Accelerator Parts for FJ40
i have the solid linkage.
BUT i just did the same thing (2f swap) and it didnt work for me.so i had to fabricate a cable.i took a cable out of a toyota corrola 86?or so and cut it and then put on the plastic bracket from the 40 cable and...