So it seems there really isn't supposed to be a second power wire going to the low side battery. looks like my problem must be either headlight relay or ground related.
I have a new to me BJ40 with a very dim headlight on the passenger side. I fixed a broken wire to a non operational turn indicator bulb in the cluster and replaced all the battery cables with 0aught. That resulted in a working indicator in the cluster but now the high beam indicator stays on at...
Run a dedicated new wire to the battery at the 24 volt side, then to a new inline fuse, then to your converter. From the converter you will run one 12 volt wire for main power. To power on and off with the ignition key (so the main power can stay connected to keep your settings but not drain...
I will add my support for the Aqualu products - strong and fit well. I have yet to see with my own eyes any dissimilar metal issues regardless of peoples claims - not saying it isn't possible but theory can be different than reality. If in doubt use stainless hardware. For me no rust far...
Being Canadian I bought a Trail Gear built Optima box similar to the one Hairy Apple made. My issue is trying to get the positioning right, vertical or upright, and then exactly where so that I can fit cables for power to the injection and starter, brake and clutch lines, fuel regulator and...
I am trying to lay out my firewall on my aqualu tub 45 build and would rather do it right the first time. The search function hasn't been very helpful. TIA
Looks to me like a belt sander would shave down the front few inches to match the hood profile pretty easy. If you don’t have a big fancy shop belt sander a hand held would work in a vice or even someone holding it upside down. Slow light passes on the front of the curve and you ought to have it...
I plan to use truck bed mat cut to fit for the flat floor potion of my Aqualu 45 and most likely generic floor mat material from home cheapo for the trans hump and firewall. I have used the generic mat material to make carpet sets in older VWs and had great results. I may attempt making the...
The shafts of the full floater neck down just before the bearing surface unlike the sf shafts. So when it comes to straight HP handling the sf is actually a bit tougher. Weight carrying obviously the full float wins.
Absolutely nothing wrong with the edelbrock motors as far as quality. It’s all about price - if you can get an edelbrock with good heads, cam, and intake, for close to a gm stock motor it’s a no brainer, edelbrock all the way. And 330 at the crank is a mild motor - fine as a daily with no drama...
I found a set on eBay in the US and had shipped to a friend I will be visiting in Oregon soon. I paid 600 US - they were freshly recovered with a leather kit form one of the vendors here on mud. I will pick them up in sept.
looking for a good set of non worn out buckets. I would consider a whole interior if someone is parting out. Tan preferred but condition will dictate.
250-317-7442
Wanted : 80 series front leather bucket seats - tan preferably. Interested in complete carpet set as well. Would consider entire interior for the right price.
250-317-7442
found seats still would be interested in good tan carpet
Bought an old 40 - engine filled with sludge and carbon so bad I could barley distinguish the rocker arms - had no idea how to clean it - ran sea foam in the oil for 100kms - oil filter must have weighed 15 pounds - rocker assembly looked factory new - I also ran it into the intake as per...
80 series sleeping platform - 3 piece design steel frame and plywood
Came with a recent purchase. Metal frame - seems well made. I will never use it. If some one wants it I won't turn down a donation but really it just needs to go to a good home. In West Kelowna.