For Sale / Wanted To Buy - Page 5

Hard40 · 01-22-07, 01:30 PM

I'm changing my steering Gearbox out to a 3.25 Lock To Lock. So for sale is one Saginaw Steering Gearbox 4.25 Lock To Lock. Was rebuilt by Carsteering.com. Has very little use. Looks new. Will sell for 135.00 including shipping from Greenville, S.C. to Continental US. Will post in for sale section if I don't get a reasonable promise in a few days. To anyone not requiring shipping the price is 100.00. This is the 4 bolt version used everywhere to convert FJ40's to Saginaw setup. 4.25 is safer on the highway but a little slow on the trail.

ALEXGAR · 01-23-07, 04:35 PM

Quote:

Originally Posted by Sputnik40

Yup. Didn't verify if it worked or not - but it looks good. Jim told me to post it on e-Bay as all the purists would go ga-ga over it. Make an offer if you want it - keeps it simple for me

.

Funny thing is - Brett down here had one new in the box that he sold on e-Bay - now that went for a fortune - kinda like seeing folks buy OEM hub caps on e-Bay for more than Toyota sells em new for...

Hmmm. Sounds like it may not work. I'll pass. Thanks!

89s rule · 01-28-07, 06:32 AM

Since I had very little response here the parts cruiser ('83 FJ60 Doo Doo Brown in and out) now has its own thread in the parts for sale section. http://forum.ih8mud.com/showthread.p...96#post1781696

VehiculousFJ · 01-30-07, 12:41 PM

Turns out replacing the engine led to a wonderful can of worms.. Thought Id try here as well.

http://forum.ih8mud.com/wanted-parts/134250-wtb-74-78-fj40-front-floor-pan-transmission-hump.html

I'll post some pictures of my mini restoration soon.

ALEXGAR · 02-03-07, 07:41 AM

USED: in good condition (no cracks or dents). Some rust spots in places. Came off a fj 60 with new BFG's (I kept the tires).

Make offer! See manufacturer pic below. (for illustration purpose only, not actual wheel).

Mongofj60 · 02-03-07, 08:07 AM

Hey Garcia, bring one of those with you so I can see it , might take them off your hands.

-Travis

ALEXGAR · 02-03-07, 10:50 AM

Ill Bring Them With Me Tonight For Anyone Who Wants To See Them

70TXCruiser · 02-03-07, 06:02 PM

I am looking for a chevy to 3 speed adapter for a 1970 fj40, I also have some parts...gauge cluster, glass from top(fold up style),factory wiring harness and a few other odds and ends.

SCJO06 · 02-06-07, 08:54 AM

Alex,

Those wheels still up for grabs???

Trollhole · 02-06-07, 12:39 PM

Free to UC member. Set of 4 inch safari lift springs . I really would like them out of the garage. They came with my 40.

http://www.man-a-fre.com/parts_acces...eafsprings.htm

Trollhole · 02-06-07, 12:54 PM

They are sold. And UC gained a lifetime membership in the process.

Thank you Steen.

Trollhole · 02-06-07, 12:56 PM

Free to UC members. Disassembled split t-case for 89 62. Has a stripped input gear. As far as I know everything else is in good order.

Trollhole · 02-06-07, 01:02 PM

Free steering gear box to UC member. In goo shape. Cut off my 40 when I did saginaw PS.

Sputnik40 · 02-06-07, 01:40 PM

Dibs - First in line!!! I will confirm I need it - it is for Todd (Rumbum) - you know him he's the other wonder twin that's always with Mike. His 82 FJ40 has a bad output shaft/bearing - would like to help him get it fixed.

Quote:

Originally Posted by Trollhole

Free to UC members. Disassembled split t-case for 89 62. Has a stripped input gear. As far as I know everything else is in good order.

Trollhole · 02-06-07, 03:01 PM

It's yours. If you want it shipped let me know.

fj40z · 02-06-07, 03:06 PM

Are the springs gone? If not I could really use them

Trollhole · 02-06-07, 04:49 PM

Quote:

Originally Posted by fj40z

Are the springs gone? If not I could really use them

yes sorry.

Sputnik40 · 02-06-07, 04:58 PM

Don't need the T-case...

Nope - my bad, Todd and Mike rebuilt the case last week. Said the bearing retainer was melted so he had to have it machined out. Day late and a dollar short - this would've saved them the trouble...

Quote:

Originally Posted by Trollhole

It's yours. If you want it shipped let me know.

ALEXGAR · 02-06-07, 06:08 PM

Quote:

Originally Posted by SCJO06

Alex,

Those wheels still up for grabs???

THEY ARE! I have them in my truck. Make cheap offer

alkaline747trio · 02-06-07, 06:56 PM

Anyone have a FF 80 series rear complete? Minus rotors? Minus everything?

89s rule · 02-07-07, 09:55 AM

Quote:

Originally Posted by Trollhole

Free to UC members. Disassembled split t-case for 89 62. Has a stripped input gear. As far as I know everything else is in good order.

Still have it Marshall? I could prob use a spare

Quote:

Originally Posted by alkaline747trio

Anyone have a FF 80 series rear complete? Minus rotors? Minus everything?

I have considered getting an 80 FF and puttign it under the 62. U need a complete housing now? I thought u just needed the 3rd?

Trollhole · 02-07-07, 12:09 PM

Quote:

Originally Posted by 89s rule

Still have it Marshall? I could prob use a spare

yep it's yours.

Did you get my PM about the A/C bracket on the 60?

Sputnik40 · 02-07-07, 03:06 PM

- SOLD - Via influence of the dark side aka BR - Will have a happy home...

Kinda jumping the gun here, but I just bought two ARBs as part of a package deal and only need one. Paid $620 each. I am looking to flip the second for $620 plus ride. This is the Semi Float part number and should be good for any 30 spline axle (mid 70's 40's, 55's, up thru 60 series and 92 62's) - front or rear.

Decent deal - would also trade towards an Orion

or 39" Krawlers (like anyone has those).

alkaline747trio · 02-07-07, 04:48 PM

I pretty much need the whole thing, minus rotors and pads and gears, non-locked.

Hard40 · 02-07-07, 05:27 PM

Sputnik 40 has donated a 4 spd to the club. Any large donation will do.

Can be picked up at my place.

Turkeypen · 02-07-07, 05:36 PM

In the spirit that Hard40 has brought to this thread, the set is available for an appropriate donation to Upstate Cruisers. These are OME 851 & OME 860, manufactured in 2004. They are in the box, but used (lightly).

Turkeypen · 02-07-07, 06:07 PM

Also up for grabs for an appropriate donation to UC is a slightly used full size black brush guard off a FZJ-80. I think it is a SOR product, and has the rubber on the front end (sort of like LA police cars). This has no dents or dings, just dirty black paint.

89s rule · 02-07-07, 08:25 PM

ewww 4 speed out of what year 60????? hummmmm will that bolt up to my 62 TC? I am throwing the idea of going manual around.

Want to go sm465 to 203 to split case, but dont know if I will have the fundage to swing it. (203-spit case adapter is $500).

72cruiser · 02-07-07, 10:25 PM

Quote:

Originally Posted by Turkeypen

Also up for grabs for an appropriate donation to UC is a slightly used full size black brush guard off a FZJ-80. I think it is a SOR product, and has the rubber on the front end (sort of like LA police cars). This has no dents or dings, just dirty black paint.

do you have any pics?
my bro-in-law just bought a '97 80 series earlier tonight and he wants to get some sliders and a bumper/brush guard for it.

thanks,
malphrus

Turkeypen · 02-08-07, 08:22 AM

I don't have a digital pic, but it is identical to SOR's part number 228-381.

It is black and in perfect shape. It goes under and over the stock bumper and attaches to the frame rails with six bolts. I think it is about a year old and came off a mall cruiser when it was Arb'd up. It lists for $650, but is yours for an appropriate donation to UC or a life membership for you or your bro. Your conscience is your only guide.

If you want, I will also save the OME springs. This is the medium grade lift from OME, which gives about 2 inchs of lift.

Finally, I have a set of stock bumpers, front and back, if they are needed. (I recommend taking the bumpers since all the hardware for the guard is mixed in one bag with the bumper hardware)

This all came off a 96 FZJ-80, and I just happened to be in the right place at the right time.

Glad to bring any or all of this to cullowee or the next club meeting, or you can come up to asheville. Or, to paraphrase Warren Zevon, we can do the deal at Dennys!

Let me know what you want.