For Sale / Wanted To Buy - Page 41

BELMONT148 · 09-15-09, 08:16 PM

Tires are sold...

Senoj · 09-17-09, 02:52 PM

Off a 72 FJ40, decent shape, all glass is good. Back latch does not work. Also comes with a rooftop rack. Just putting it out there to see if anyone is interested. If you are, let me know and I can take some pics for you. I would also entertain any trades.

cats48 · 09-21-09, 07:33 AM

Intrested. How much for the top? Pics too.

BELMONT148 · 09-21-09, 11:15 AM

I need a clutch fork for a 75'-84' 4 speed, and I also need a PTO spacer or gear for a 4 speed transfer case. I prefer a spacer but will settle for the gear.

Went to assemble the drivetrain saturday and can't find these pieces now.

Thanks,
Jeremy

eventhough · 09-21-09, 11:17 AM

Quote:

Originally Posted by BELMONT148

I need a clutch for for a 75'-84' 4 speed, and I also need a PTO spacer or gear for a 4 speed transfer case. I prefer a spacer but will settle for the gear.

Went to assemble the drivetrain saturday and can't find these pieces now.

Thanks,
Jeremy

I have 2 clutches but they are used... disc and flywheel

jfz80 · 09-23-09, 07:43 AM

Quote:

Originally Posted by 89s rule

Tires and rims sold. Still have the spares and the lift springs for the 62, anyone interested?

cant believe the truck didnt sell for you.... even had me thinking

I let my neighbor know about the springs, he's been talking for years about lifting his and wants 4'' sua. cosmicdebris on mud if you want to pm him

BELMONT148 · 09-23-09, 09:24 AM

Quote:

Originally Posted by eventhough

I have 2 clutches but they are used... disc and flywheel

I just noticed I had a typo. I actually need the clutch fork. Do you have one of those?

Thanks,
Jeremy

89s rule · 09-23-09, 09:31 AM

Quote:

Originally Posted by jfz80

cant believe the truck didnt sell for you.... even had me thinking

I let my neighbor know about the springs, he's been talking for years about lifting his and wants 4'' sua. cosmicdebris on mud if you want to pm him

Thanks,
I have had a few PMs about the springs. I also have a guy interested in the 4.88 thirds, but not sure if I will go that route.

eventhough · 09-23-09, 10:06 AM

Quote:

Originally Posted by BELMONT148

I just noticed I had a typo. I actually need the clutch fork. Do you have one of those?

Thanks,
Jeremy

Had two but sold 'em awhile back - sorry. Check Trollhole and his hoard of parts.

Carp · 09-23-09, 09:13 PM

Cleaned up the garage tonight, and I've got some stuff for sale now:

2F carb, was used on my smogged and desmogged truck before a THC carb took it's place. Was put on my truck by Urban Land Cruisers about 4 years ago, and was running pretty well when I took it off. Needs an A/C idle up vacuum pot (should be on your carb) - $125

2F Smog equipment - right now it's just the fender stuff and metal spaghetti. - Free to good UC home

Stock grey console for FJ60. Has the cupholders on the side. In OK shape, was working fine, just got a bigger one. - $25

Complete 350 TPI intake - I have the intake manifold, rams horns runners, plenum, butterflies, mass air flow sensors, intake hose, fuel injectors and rails, and a wiring harness from an 87 IROC. Would make a good base for a nice TPI build It might be missing a few screws and thermostat neck, but that should be easy to find. - will take $200 for the setup.

BELMONT148 · 09-24-09, 08:11 AM

Quote:

Originally Posted by eventhough

Had two but sold 'em awhile back - sorry. Check Trollhole and his hoard of parts.

I did, I am waiting to here back from him.

Thanks,
Jeremy

BELMONT148 · 09-29-09, 08:24 AM

My brother called me and decided to take me up on my last resort offer. However, I now do not have the time to part it out, which was my intentions when I told him I would take it if knowone else did. He will take $1000 cash which could easily, easily be made up with very little removal effort. Meaning pull the engine, pull the axles and you are over $1000 in parts right there.

Please read the previous thread for details.

http://forum.ih8mud.com/sc-upstate-c...e-87-fj60.html

$1000 cash

Jeremy

TLCandME · 10-05-09, 09:06 AM

'71 40 3 or 4 spd. t-case?

Anyone got any leads on a used 3 or 4 speed t-case? I've got a 3 in there now but it leaks and now I'm replacing the clutch so might as well work on the t-case too. This is for a '71 40. Thank you!!

William

eventhough · 10-05-09, 09:39 AM

Quote:

Originally Posted by TLCandME

'71 40 3 or 4 spd. t-case?

Anyone got any leads on a used 3 or 4 speed t-case? I've got a 3 in there now but it leaks and now I'm replacing the clutch so might as well work on the t-case too. This is for a '71 40. Thank you!!

William

PM Trollhole - I think he has a few.

Senoj · 10-05-09, 11:17 AM

Quote:

Originally Posted by Senoj

Off a 72 FJ40, decent shape, all glass is good. Back latch does not work. Also comes with a rooftop rack. Just putting it out there to see if anyone is interested. If you are, let me know and I can take some pics for you. I would also entertain any trades.

I still have this available and a ton of pics now. If any one is interested pm me. Thanks.

BELMONT148 · 10-05-09, 12:06 PM

Quote:

Originally Posted by Senoj

I still have this available and a ton of pics now. If any one is interested pm me. Thanks.

Got the pics, did you get my email?

Thanks,

Jeremy

Trollhole · 10-05-09, 12:33 PM

Quote:

Originally Posted by TLCandME

'71 40 3 or 4 spd. t-case?

Anyone got any leads on a used 3 or 4 speed t-case? I've got a 3 in there now but it leaks and now I'm replacing the clutch so might as well work on the t-case too. This is for a '71 40. Thank you!!

William

How many do you need. I have a few.

TLCandME · 10-06-09, 10:32 AM

Thanks Marshall - I think Jeremy is going to be able to hook me up on the t-case and I'm already looking to take a gas tank off his hands. I appreciate all the help

William

BELMONT148 · 10-06-09, 03:09 PM

I have the following from the FJ60 for sale:

Good 4 speed tranny/split transfer
Driveshafts
4 doors
Rear Hatch/Tailgate
Front Fenders
Grill
Hood
New Toyota OE Radiator
New Heater core
Dash
Carpet
Seats
Door Panels
New Flowmaster Exhaust

Color is silver exterior with blue gray interior.

Make offer...

You are welcome to come and remove what you want for a discount or I will price it ready to be picked up.

Thanks,
Jeremy

kkt · 10-07-09, 08:08 AM

Good F 1/2 transition motor for sale.
Cold compression numbers are 1-6 are as follows
140/140/138/140/150/140
price is 650.00 with f carb or 500.00 without carb. SOLD

Also have a good 64era split hood 150.00
Location Atlanta, Ga.

smkymntn · 10-08-09, 07:31 PM

Posting this up for a friend- location is Atlanta, Ga

If you need photos let me know- I will post it here first and then on the main board if no action.

H41 non USA 4 speed and transfer case 4.91 1st gear. I have 3, two with a rear pto.with the rear pto you could run a generator or hydraulic pump, ect. They all have the parking brake on the output shaft like the 40 series.This would allow you to add rear disc brakes without the problems caused by trying to add a parking brake to the calipers. All three have less than 12,000 miles, one has less than 3000 miles. These transmissions came from Japanese fire trucks with the 2f or 3f engine. They are out of a 60 series, and all have the split transfer case. $1200 each, these are in like new condition. I have one h41 with a non split case for the 40 series $1000 no rear pto.Spector gets $1500 for these and for only $780 more you can buy the parking brake setup.

Rear e-locker for 80 series $850,

full floater rear axle with rear disc brakes and toyota limited slip rear diff. $600. For those that have a 91,92 fj80 this is a good upgrade to the brakes, and you get limited slip this axle had 78,000km.

Also pristine frame no rust. for a 60-62 $600

soft top frame and doors $550

pto 3 from $450 to $650

door, starters,radiators heaters,seats,hoods.
parts for 55, 60,62,and 80 series complete trucks if you need something ask.

smkymntn · 10-08-09, 07:37 PM

Quote:

Originally Posted by BELMONT148

I have the following from the FJ60 for sale:

Good 4 speed tranny/split transfer
Driveshafts
4 doors
Rear Hatch/Tailgate
Front Fenders
Grill
Hood
New Toyota OE Radiator
New Heater core
Dash
Carpet
Seats
Door Panels
New Flowmaster Exhaust

Color is silver exterior with blue gray interior.

Make offer...

You are welcome to come and remove what you want for a discount or I will price it ready to be picked up.

Thanks,
Jeremy

How much for heater core- its already getting cold up here/

greenseaman · 10-08-09, 08:09 PM

I need a fuel door for a white 93 80! Anybody got one? Let me know...

BBQ BOY · 10-08-09, 11:35 PM

Still need a Fiberglass top for my 40.

eventhough · 10-09-09, 05:59 PM

Y'all might want to see this

Landcruiser Parts for Sale

BBQ BOY · 10-09-09, 08:37 PM

Wow. Thanks ET.

Carp · 10-09-09, 08:48 PM

Might have to see if I can give them a call...

eventhough · 10-10-09, 08:45 AM

I'm talking to him..... Might get a 40...

71-CRUISER · 10-11-09, 05:33 AM

He goes by Cruiser Ray and he has a lot of Junk. If you need small parts he can be useful but the trucks he has are mostly not worth restoring and would take a pile of cash to be reliable.

Edited to clarify the definition of JUNK.

Junk : a small mountain of Land Cruiser Parts from FJ40s and a few 60s but mostly in very used condition. Some restorable and some not.

Ray is a very nice guy and if you are looking for something small he may very well be the man to call.

eventhough · 10-11-09, 07:49 AM

Thanks Michael... Good to know!