For Sale / Wanted To Buy

[eventhough]

Originally Posted by ff347

WTB/ a thermostat housing for a 2f if anybody has one they need to get rid of.

Thanks,
Scott

2 or 4 bolt? I have a 2 bolt that needs 1 bolt extracted. $5

[ff347]

WTB/ a thermostat housing for a 2f if anybody has one they need to get rid of.

Thanks,
Scott

2 or 4 bolt? I have a 2 bolt that needs 1 bolt extracted. $5

Should have stated in the 1st post, it is a 4 bolt. Thanks though.

Scott

[jleeFJ62]

silver 60 series fenders
A little surface rust on the inside of one fender, otherwise rust free - $50

[jleeFJ62]

15x8 3.5 BS rim for sale - $just a beer at a monthly meeting or event
White rim but was painted Olive green. Green showing through though..Can't get a pic to load.

NIB Garmin Nuvi 255W -$150 or obo

[99UZJay]

Guys I have completed my 1FZ swapping out journey, now I have the leftovers. I am offering the block itself which is in pretty good shape considering. The cyl walls are good, and everything else is fine, I just need it gone. It comes with the crank in place and all pistons. Make me an offer or it goes to the scrapyard.

[89s rule]

Anyone want to do a group buy on scepter fuel cans? They are used and can use a good cleaning, but I should be able to get them for $35-$40 each. Let me know b/c I need to get back to the guy. Hoping to get at least 7+ to get the discount.

Also still have the 62. Accepting serious offers. May even drop the price if you dont want the 4.88's and can bring me thirds to swap in.

Selling my 4wheeler as well or trade for a golf cart. I have a 1995 Yamaha Warrior has an exhaust and new tires for the rear. Make a good offer and I will throw in a chain and a nice set of goggles.

I havent ridden it in a few years and we want somethign we can all use.

[jleeFJ62]

Matt,

Would you just want to sell the axles? Maybe we can trade + cash?

Thanks
john

[89s rule]

Originally Posted by jleeFJ62

Matt,

Would you just want to sell the axles? Maybe we can trade + cash?

Thanks
john

Give me a call and we might be able to work something out. 864-378-6696.

[Brock]

IH8MUD.com - View Single Post - For Sale/Wanted To Buy


Make me offer for tires only...


I bought 5 steelies with center caps from a gentleman a month or more ago and they were dropped off at my buddies near Charlotte to keep at his motorcycle dealership. Picked them up yesterday and they are brand new pretty much with great centercaps and no scratches or rust anywhere....so these are going to be the ones I put mudders on if my wife ever lets me drive FJ again...

what really caught me by surprise is the guy left on his tires....nearly new set of 5 ea BFG AT KO tires...looks to have about 15,000++ miles left on them as they are about halfway worn and those are usually at least a 40k tire. Spare is brand new with zero miles but other four are worn a bit.

If someone wants a great deal on 5x BFG AT KO (3ply sidewall) in 265x70x17....make me an offer. They go for $200 a piece on Discount Tires Direct.......so make a serious offer and they are yours. Tires only...not wheels..unless you make me an even better offer.

Link is original poste and show them all stacked and mounted as I bought them..just took out of back of FJ60 tonight.

[Trollhole]

Originally Posted by Brock

IH8MUD.com - View Single Post - For Sale/Wanted To Buy


Make me offer for tires only...


I bought 5 steelies with center caps from a gentleman a month or more ago and they were dropped off at my buddies near Charlotte to keep at his motorcycle dealership. Picked them up yesterday and they are brand new pretty much with great centercaps and no scratches or rust anywhere....so these are going to be the ones I put mudders on if my wife ever lets me drive FJ again...

what really caught me by surprise is the guy left on his tires....nearly new set of 5 ea BFG AT KO tires...looks to have about 15,000++ miles left on them as they are about halfway worn and those are usually at least a 40k tire. Spare is brand new with zero miles but other four are worn a bit.

If someone wants a great deal on 5x BFG AT KO (3ply sidewall) in 265x70x17....make me an offer. They go for $200 a piece on Discount Tires Direct.......so make a serious offer and they are yours. Tires only...not wheels..unless you make me an even better offer.

Link is original poste and show them all stacked and mounted as I bought them..just took out of back of FJ60 tonight.

That's crazy. Only kicker for me is the 17 inch rim needed.

[Brock]

I got a set of brand new 17 inch steelies off FJ Cruiser with center caps too....LOL

[jleeFJ62]

Not mine

Really Cheap 80 series Slee sliders
[For Sale] Slee sliders for FZJ80 - North Carolina 4x4 Forum

[89s rule]

Originally Posted by jleeFJ62

Not mine

Really Cheap 80 series Slee sliders
[For Sale] Slee sliders for FZJ80 - North Carolina 4x4 Forum

Thanks for the heads up. This is the same guy I have been trying to buy parts off of his 80 for over a month. Maybe he is finally willing to sell a few things and get serious about it instead of being wishy washy about it.

[J-Bo]

I've got a wheeling trip coming up and I want at least 1 or 2 stock replacement birfields for an FZJ80 to take along with me in case I break so I can get back home and more importantly to work.

So, if you have 1 or 2 you want to get rid of, please hit me up with a PM or email.

bolandjay@yahoo.com

Thanks,
J-Bo

[BELMONT148]

My brother is done with his 87' FJ60 so we are trying to part it out. It is in excellant shape, however his frame gave out this saturday and he doesn't have the means to replace it/repair it. It is also available complete as he is taking offers. He doesn't want much out of it. Probably less that than what he just put into the motor/exhaust 2 month ago. It has the following:

2F
New Headgasket (2 months ago)
New Head (2 months ago)
New MAF 2 piece Ceramic Headers
New Exhaust w/ Flowmaster (2 months ago)
Complete motor, Filter to Oil Pan available with the tranny/transfer case.

Suspension
OME 2.5" Springs, with new bushings and 2.5" lift shackles
Front and rear axles, don't seem to leak complete with driveshafts and all steering components

Body
Straight and freshly painted silver:
Hood, front fenders, grill, all four doors.
Rear wheel well has rust, the back gate needs a new trim/license light assembly, but no rust on the gate or hatch. Complete with all lights, emblems etc.

Interior
Very clean blue interior. Small tear in drivers seat, but everything else is in great shape. Seats, carpet, dash, door panels, headliner, etc. Sony CD player with ipod cable installed.

Tires
33" rollers on steel rims

Let me know of an interest in any parts and I will post a price. If we don't have any interest in parts right away, it will be sold complete and cheap, probably to me .

So post up any interest in parts or pm me an offer for the whole rig. All it needs is a frame and a little rust repair while the body is off for a nice rig.

Jeremy

[landtank]

I've got a spring kit for a 80 series available.

The springs are OME Js with L shocks, slightly used and never off roaded
a set of caster plates
Tacoma modified DC shaft from a 2004
DIY panhard joints
HD sway bar links

you will still need:

extended brake lines
sway bar drops
bump stop drops

$1200.00 plus shipping or I can bring them to OTMT 2009.

[89s rule]

I have an offer on the table for $2500 on my 62. If anyone can match it or do better then please call me and come get it. Im losing some serious $ here, but its time for it to go. 864 three seven eight 66 nine 6

Once its gone I will be selling the parts that I have.

[BELMONT148]

Here is the thread with some pics of the 60.

http://forum.ih8mud.com/sc-upstate-c...ml#post4697842

Jeremy

[Mongofj60]

My 84' FJ60 is going bye bye in a bad way. We are getting Amy a new Camry so unless anyone wants to buy the old blue beast for $4500 she is going to be crushed. I know I will sob like a baby so if anyone is looking for a 60 you could stop me from crying.

Stats:
84 FJ 60
215,000 miles
Daily driver for 10 years now
Roof rack
ARB Bull bar
Runs steady
no a/c, compressor went out 5 years ago, I like the windows down

Call me with any questions, 864-270-1821

[Turkeypen]

Make sure you strip her down before turning her in under CARS. Bumper, rack, etc. need to be "recycled" and you will come out with more $ in addition to the credit. I would have her just "drivable" when you pull it in to the dealership.

[Carp]

How much for the ARB and lights on it? Is it winch compatible?

[charlestonfj60]

How much you want for the roof rack?

[3pits]

I maybe in need of a running 2f with transmission and transfer case....... for (believe it or not) a new addition to the family......... a 73 fj55 !!! I have not closed the deal but it looks pretty good....

also negotiating on a 94 80,,,, but shhhh dont tell the GF...

[BELMONT148]

Interested in ours in the 60 for $800. It would give the 60 electric ignition and a 4 speed with split case. It has a new clutch, rear main, and oil pan gasket in addition the new head and head gasket. You would have to come help remove it when you pick it up however.

Jeremy

[BELMONT148]

Kimber Ultra CDP .45 w/ ammo and holsters

870 Express Home Defense

http://forum.ih8mud.com/sc-upstate-c...h-my-40-a.html

Jeremy

[Turkeypen]

Jeremy,

I'll take the 20 gauge Spec. Ops. PM sent.

-David

[Turkeypen]

Jeremy,

Your PM box is full.

I'll take the 20 gauge. Can we mud ship it to the annual meeting on September 19 at Aunt Sue's? But, if you can figure a legal way to ship it, I'll gladly pay for that too. (Sure would like the syntheic forearm if you find it)

If you will PM me your address, I can send you a certified check from Wachovia today. (I pay bills electronically, which lets me send checks from the bank free to friends). No, I'm not from Nigeria . . .

-David
(past prez UC, humble UC member)

[89s rule]

Originally Posted by Turkeypen

Make sure you strip her down before turning her in under CARS. Bumper, rack, etc. need to be "recycled" and you will come out with more $ in addition to the credit. I would have her just "drivable" when you pull it in to the dealership.

Just as David said, strip everything off of it before you take it in. Switches, everything. I even saw people selling seats. And the program ends tomorrow. Dont mention the clunkers until you have a deal then tell them you have a trade.

Also, your welcome for helping buy your wife a new car. Everyone in UC should get a thank you.


PS - Someone buy my 62!!!!

[eventhough]

Originally Posted by 89s rule

Just as David said, strip everything off of it before you take it in. Switches, everything. I even saw people selling seats. And the program ends tomorrow. Dont mention the clunkers until you have a deal then tell them you have a trade.

Also, your welcome for helping buy your wife a new car. Everyone in UC should get a thank you.


PS - Someone buy my 62!!!!

Travis already traded his 60

[Mongofj60]

I got a lot off, including seats, etc. I will have a garage sale posted in the next few days.