For Sale / Wanted To Buy

[89s rule]

Originally Posted by dbenke

Only a set of 4, you interested in the tires, too??

What are they? depending on price, yes. I dont have a "need" for them, but have a few ideas in my head. Want any stock 60/62 rims?

[BELMONT148]

I have my slightly used poly gas tank that fits under the seat of all FJ40's. It will come with a sending unit and a 75'-up filler neck with the hose that I modified to make it work in my 71'. It was brand new when I got my truck, and has just been storing a little gas in it in the truck the past few years.

Pics can be taken this weekend.

Price $75 plus shipping

Thanks,
Jeremy

[radioridge]

Originally Posted by dbenke

Only a set of 4, you interested in the tires, too??

interested in the wheels only.if you still have them.

[dbenke]

I still have them, I'll try to get a pic tomorrow. They are lug-centric for a 94-earlier.
PM me

[dsa03cjj]

Originally Posted by eventhough

Any more response on the raffle? I would love to buy a ticket but funds are too tight.

I remember looking at that Pig when it was for sale (I think when you bought it). It looked nice. I would love to see it up close if you are ever around Greenville before it sells.

Best of luck to you in your trip. I highly respect what you are doing.

We have gotten a good bit. Now we have to start organizing it. We are more than certain of this raffle now. Unless someone just comes along and slashes out some dough for it, it's on. Either way, God is good.

We live in Spartanburg and commute to Greenville everyday. I'd love for you to see it. send me an email at the dsa03cjj@hotmail.com and let me know your schedule and we'll get together. it's been very hard for us over the past few eyars to make it back to a meeting. what? you mean we've been to meetings before? yes, leslie and i have been to allan's house and ralph hayes way back when.

we are close friends with jeff burns (anyone remember that crazy mug of a man-beast? he's now in seminary in Raleigh, NC).

thanks everyone

[$out]

i have a 3fe engine for sale $500.00 pm for details

[dbenke]

Lets see if these pics work

[Carp]

[QUOTE=Carp;4460552]Gotta sell things to buy things, so here'ss my garage sale:

5 15x8 white wagon wheels - 3.25" backspacing. SOLD
1987 2F stock carb. was told it worked but ran rough when removed. Can't vouch for how it runs, but doesn't look dirty. Might be a good candidate to try and tune, or a good core. $25 - going on the main board with a price increase.
1987 60 gutter chrome. not a complete set, but cheap. 6 pack of PBR and I'll throw in the snake blinders. Bueler?[/QUOTE]

Since I sold 5 tires and now 5 rims, I NEED a spare (rim included) for cheap. Anything will do, just needs to hold air, and have the toyota lug pattern. Ideally, it would be a 33, but tread is open to what's available.

[Trollhole]

[QUOTE=Carp;4488526]

Originally Posted by Carp

Gotta sell things to buy things, so here'ss my garage sale:

5 15x8 white wagon wheels - 3.25" backspacing. SOLD
1987 2F stock carb. was told it worked but ran rough when removed. Can't vouch for how it runs, but doesn't look dirty. Might be a good candidate to try and tune, or a good core. $25 - going on the main board with a price increase.
1987 60 gutter chrome. not a complete set, but cheap. 6 pack of PBR and I'll throw in the snake blinders. Bueler?[/QUOTE]

Since I sold 5 tires and now 5 rims, I NEED a spare (rim included) for cheap. Anything will do, just needs to hold air, and have the toyota lug pattern. Ideally, it would be a 33, but tread is open to what's available.

Carp I'll take the Carb for 25. I'll also promise to sit down with you and explain the TBI harness and where everything goes.

[jleeFJ62]

Not mine....

FJ40 axles
[For Sale] FJ40 Toyota Alxes - North Carolina 4x4 Forum

FJ40
$3200
[For Sale] 1974 FJ40, $4000 (trade) - North Carolina 4x4 Forum

Built 80
[For Sale] 95 Built FZJ80 Landcruiser - North Carolina 4x4 Forum

[89s rule]

Originally Posted by jleeFJ62

Not mine....
Built 80
[For Sale] 95 Built FZJ80 Landcruiser - North Carolina 4x4 Forum

This has been for sale awhile. It had serious issues at one time from my research b/f.


Still wiating on info on those 80 rims.

[dbenke]

Sorry, I thought I sent you a PM

[jleeFJ62]

not mine - seems like a pretty good deal

Toyota Land Cruiser FJ60 1984

[72cruiser]

Originally Posted by jleeFJ62

not mine - seems like a pretty good deal

Toyota Land Cruiser FJ60 1984

nice find... anybody close enough to take a good look at it?

i'd be interested if the rust isn't bad in the quarters or frame.


malphrus

[R.K.]

Listing for a friend:

Nice FJ40 trail rig for sale. It has a strong 2F with Weber carb, header, GM power steering and altenater. Transmission is an SM420 with 7:1 first gear, stock t-case with twin sticks.

Spring-over axle suspension front and rear with shackle reversal in front. Lockers and disc brakes on both axles. Tires are 37" Boggers with most of the tread remaining on custom beadlocks.

Custom front bumper set up for Warn 8274 with stinger and custom rock sliders (not pictured). Also has 6 point roll cage. Body is in great condition for a trail rig. Hard top and doors included.

[jleeFJ62]

not mine..another pretty good deal
1977 Toyota Land Cruiser FJ55

[R.K.]

Originally Posted by R.K.

Listing for a friend:

Nice FJ40 trail rig for sale. It has a strong 2F with Weber carb, header, GM power steering and altenater. Transmission is an SM420 with 7:1 first gear, stock t-case with twin sticks.

Spring-over axle suspension front and rear with shackle reversal in front. Lockers and disc brakes on both axles. Tires are 37" Boggers with most of the tread remaining on custom beadlocks.

Custom front bumper set up for Warn 8274 with stinger and custom rock sliders (not pictured). Also has 6 point roll cage. Body is in great condition for a trail rig. Hard top and doors included.

SOLD!

[Trollhole]

R.K who bought it?

[R.K.]

Originally Posted by Trollhole

R.K who bought it?

Jason from Charlotte.

[90FJ62]

Ok so as most know i sold my 62. I have been getting some parts to take hte OME lift off. Well I ordered 4 spring pins from cruiserparts about 3 weeks ago. After many phone calls and alot of cussing they came today. I opened the package and they sent me the WRONG PARTS. I really need to get the 62 delivered so i can work on my FJC. Anyone have any decent spring pins sitting around that they want to get rid of. Let me know. I am going to try and take the lift off this weekend also. It is still for sale if anyone is interested in the lift or turning a wrench. you can PM me or email at cruiseraddict at gmail dot com.



Thanks
Dave

[WNCskydiver]

Ok so I'm sick of waiting on my fj60, badly need a good NOT cracked 2f cylinder head. Looking for a fair price on a good head, please no junk. I am in Western NC close to Upstate SC Atlanta etc.

[85roktoy]

1978 Toyota Land Cruiser FJ40


I purchased this FJ40 about 2 years ago from a gentleman that bought it for his wife to drive. She drove it for a few months and decided that it wasn’t the best vehicle (for her) to drive daily so I purchased it. The owner prior to them was the original owner and kept it garaged most of its life. I have taken EXCELLENT care of this FJ40 and it has been garaged since the day I purchased it. I added a few mods but wanted to keep it as original as possible. I am forced to sell due to the economy and bills that need paying. Here are the specs.

Body

In my opinion the body on this 78 FJ40 is in excellent condition compared to most. Everything on the body is original except the outside paint. The original owner re-sprayed the outside a few years ago because the original paint was oxidized. The inside is the original freeborn red paint. There was no body work done to the vehicle what so ever. It is bondo free. I thoroughly inspected this before I purchased it.

The inside is in excellent shape as well. There is very very minor surface rust here and there. Nothing is deep, just on the surface. The floor in the back has a few bubbles and the seam where the back meets the rear lip panel has a spot about 6 inches long of rust. The floor boards are solid and original. The back doors are excellent and solid. The front doors are good except for the bottom seam. There is some rust here. The top is great with a couple quarter sized spots. The seats are original but could use some attention or nice seat covers.

The underneath and frame are very solid. Very minor surface rust on some spots but that is all. Easily removed with a wire brush or wheel. Please see the pics.

I looked for a while and it was very hard to find an FJ40 in this great of shape and original as it is.

Engine & Drive train

The motor is the original and currently has 79k. When I purchased the vehicle it had around 74k. I went through the motor and performed a full tune-up. I replaced the plugs, wires, cap, rotor, and changed all the fluids. The previous owner had rebuilt the carburetor. I also replaced the original radiator with a 4 core heavy duty new one as well as the thermostat and hoses. I tested the compression in all cylinders as well and all registered in the 160’s so the motor is strong and punchy. All the smog equipment is still attached but need attention.

The only issues I know with this FJ40 and the motor is a leaking manifold gasket and the smog system. The motor runs great but sometimes idles low when it’s hot. I have been told it’s a vacuum line issue with the smog system. Other than the manifold gasket and vacuum line issue it runs great and strong. The oil pan gasket could use replacing. It leaks but very slightly. The cruiser has been kept in my garage ever since I purchased it and I’m almost positive that there isn’t even a spot from it leaking/dripping.

The 4spd transmission feels good and I have not had any issues with it other than a very slight leak that hasn’t left a drip spot either. It shifts smooth and feels strong as well as the 4 wheel drive system. Axles look and “feel” great.

Mods & Other Info

Once all the important issues were taken care of I added a few things while trying to keep it as original as possible.

The suspension is a full spring HFS (Cool Cruisers of Texas) 4” kit with shocks and greaseable shackles all the way around. This is the best lift kit I could purchase for the FJ40. I spent months researching different lifts. It also has the HFS steering stabilizer.

The wheels are from an 81 FJ40 and have been blasted and powder coated. The tires are BF Goodrich Mud Terrain 33x10.50/15’s which have roughly 3000 miles.

I recently added a new full 2.5 inch exhaust system from the manifold all the way back with a Magnaflow muffler. In my opinion it sounds excellent and is not loud at all. The sound produced is low and deep. The system also made the motor way more responsive. The shop that created the exhaust builds systems for race cars on a weekly basis so I know it’s done perfect and I watched the whole process.

The roll bar is custom that I created using another FJ40 roll bar. I simply added another bar and attached it with a straight piece in the center. I still have the original bars if you want to convert it back to the way it was. Keep in mind that this isn’t as strong as a full roll cage that attaches to the frame but is stronger than the original setup and still looks factory with the padding attached to each bar.

The front has a custom powder coated heavy duty bumper with 2 tow points. I still have the original front bumper that will be included. I also had a 3/8” thick winch plate made. The winch is a Warn M8000 that has been used about 3 times and not for pulling anybody out. The lights are Hella 500’s and have never been hooked up.

I mounted two KLH outdoor speakers in the back but never go around to hooking them up.

I pulled the factory headliner down because I was hanging and torn in places. Many people just add carpet or purchase a new kit from SOR or CCOT.

The rear tail lights are brand new with bulbs and rubber gaskets.

Also included in this sale are a Spector Off-Road Family Summer Top, a set of soft half doors, and a rear tailgate panel cover for when the top is off.

Specter Off-Road Land Cruiser Parts - Page 273 Half Doors

Specter Off-Road Land Cruiser Parts - Page 272 Bikini & Summer Tops


Purchase & Misc Info

I searched up and down for a Land Cruiser of this condition and found it with this one. This FJ40 would be an excellent candidate for a complete restore and isn’t far from being transformed. I’ve owned 8 Toyota’s and have taken great care of all. The top is currently off for the summer but can be attached if need be. I have tried to be as thorough as possible in my description. I will add further if I left something out.

$10,000 is my bottom dollar for this FJ40. The winch is not included but can be for an additional $400. I also plan to list this on Ebay today or tomorrow with my reserve set at $10k.

Please contact me here or PM with any questions you may have. Located in Athens GA. Thanks for looking! WM

[BELMONT148]

I have a good head that was on a FJ60 with 130,000 miles. It looks really clean. You can have it for $100.

Jeremy

Originally Posted by WNCskydiver

Ok so I'm sick of waiting on my fj60, badly need a good NOT cracked 2f cylinder head. Looking for a fair price on a good head, please no junk. I am in Western NC close to Upstate SC Atlanta etc.

[99UZJay]

Try Car-Part.com--Used Auto Parts Market, they might have it. You'll have to dig to find it, but i'll bet one can be found.

[dbenke]

We just put a lift on jason's (charlestonfj60) 60 yesterday. He has the one's that came off.

[90FJ62]

Sorry i have not updated this. I called cruiserparts and had a very heated discussion with them on the parts. They charged me the difference in price and sent out my pins on Friday. I did not get them yesterday so i should have them on monday. Thanks for looking and if they are not on my door step on Monday i will look elsewhere. dbenke did Jasons come out easy? When i put the lift on my 62 i had to head and pound on the original ones. Once out they where all bent up....

On another note i did take the front springs out yesterday and they came off so easy. So if anyone is interested in the lift send me a pm or email. i will put up some pictures of the parts later.



Thanks
dave

[jimbo92]

ive got it in the for sale thread but i figurd i would link it here incase and locals want it
http://forum.ih8mud.com/vehicles-tra...ml#post4517294

nice truck just cant have it all right now haha

[dbenke]

We didn't have to beat them out, but they need to be cleaned up.

[charlestonfj60]

Lockers and Location?

[jimbo92]

greenwood sc and no lockers