For Sale / Wanted To Buy - Page 32

Trollhole · 04-13-09, 07:57 AM

Quote:

Originally Posted by 3pits

2 drum factory wheels 10$ each
1 fj62 wheel 10$, rusty back side, but still good
mini truck axel complete hubs, birfs,,,, whole thing 275$
misc parts for disc brake conversion, knuckles, hub bodies, etc, email me with what you need
weber carb, 32/36 was working when pulled , needs work, free for shipping
O $&it bar, some pitting rust free for shipping but still solid
fiberglass hard tops 50$ each
hard top sides 10$ each
front fj40 doors
rear fj40 doors
anyone interested in my 78 40 email me, short list, rebuilt 2f .400 over, chrome headers, new radiator, new water pump, new battery, new cables,,,,, 4speed xfer/trans, rhinolined interior, LOTS of extra parts, 4" lift, weber 38 on it, non usa dizzy, 8274, saginaw power steering, rock finders, er I mean steering correction kit, anti inversion shackles, rock sliders, rock sliderubolt plates, rear tail light protectors,,,, new windshield, new dash, poly gas tank, co2, the list goes on and on.... lets talk

76 rolling chassis, I had more than 2500 into it, will take 1400

Bob I'll take what you have on the hard top side panels. How many do you have? Do you have the pieces that go above the doors?

Cirbo · 04-14-09, 05:36 PM

For Sale
Warn p/n 38312 wire rope assembly, 5/16-125' with thimble $150 O.B.O.
Warn p/n 5742 Roller fairlead assembly
$75 O.B.O.
Both parts are brand new take offs.
Please email me at seriesLR(at)gmail(dot)com
Jim

CruisinTiger · 04-14-09, 07:01 PM

I'm lookin for a drivers side door lock, the guts, the plastic casing on mine has finally given out. Tried to repair it with some epoxy but the tension is too much....I only need the plastic housing but will take the whole thing.... it took me about 5 min to take the old one out. Thanks Chuck

3pits · 04-14-09, 11:01 PM

chuck I dont have it, but what year and model are you looking for?

Trollhole · 04-15-09, 09:17 AM

Quote:

Originally Posted by 3pits

chuck i dont have it, but what year and model are you looking for?

86 fj60

VehiculousFJ · 04-15-09, 12:31 PM

It's still sitting there...

http://forum.ih8mud.com/sc-upstate-c...c-29078-a.html

CruisinTiger · 04-16-09, 05:57 PM

I would think that a 62 would also work, but I'd recommend takin a pic and sendin it to me and I'll let ya know if it looks the same.

Thanks

Carp · 04-16-09, 07:50 PM

Quote:

Originally Posted by Carp

FOR SALE: Five(5) 33x10.50R15 BFG All-Terrians on 15x8 white wagon wheels. Will check tonight, but bet they have 75% tread left, if not more. No damage,fit my 60 perfectly, just got a screaming deal on some KM2s. $450.

Also, I am looking for a set of 16x7 or 16x8 wheels for my 60. Would be willing to consider FJC wheels if they are priced right.

Trades very much entertained.

The tires are spoken for, but the wheels are for sale still. I have 5 of them, and I think they would look good on a freshly painted orange FJ40...

Also, I'm looking for a set of 1.5" spacers for the wheels that I picked up for the 60. I knew that going in, so If you've got a set, let me know.

89s rule · 04-18-09, 12:02 PM

Quote:

Originally Posted by NGA-FJC

Placed the mini on craigs, if anyone is interested.

1981 Toyota Pickup

Looks like a good deal.

Cirbo · 04-21-09, 06:04 AM

Quote:

Originally Posted by Cirbo

For Sale
Warn p/n 38312 wire rope assembly, 5/16-125' with thimble $150 O.B.O.
Warn p/n 5742 Roller fairlead assembly
$75 O.B.O.
Both parts are brand new take offs.
Please email me at seriesLR(at)gmail(dot)com
Jim

Roller fairlead sold.

Cable reduced to $100 O.B.O.

ClemsonCruiser · 04-21-09, 08:46 AM

Looking for a stock chrome front and rear bumper for the FJ62 I just picked, it doens't need to be perfect but as clean as possible would be great. I believe any 60 series bumper will work

JP

VTCruiser · 04-21-09, 10:46 AM

Quote:

Originally Posted by ClemsonCruiser

Looking for a stock chrome front and rear bumper for the FJ62 I just picked, it doens't need to be perfect but as clean as possible would be great. I believe any 60 series bumper will work

JP

rear bumpers may be the same, but I think the fronts are different? how about some pics of the 62?!

jleeFJ62 · 04-21-09, 10:56 AM

Quote:

Originally Posted by VTCruiser

rear bumpers may be the same, but I think the fronts are different? how about some pics of the 62?!

Rear bumpers are different, front bumpers are the same
X2 Pics!

Trollhole · 04-21-09, 12:10 PM

Quote:

Originally Posted by ClemsonCruiser

Looking for a stock chrome front and rear bumper for the FJ62 I just picked, it doens't need to be perfect but as clean as possible would be great. I believe any 60 series bumper will work

JP

I have an 80 series bumper you can have. Lol.

ClemsonCruiser · 04-22-09, 02:58 PM

Thanks for the info on the bumpers fellas..... I will get some pics up of the old girl up before too long. you guys might know it already though as I bought it from SwampyCU (Brian) a fellow upstater

JP

dbenke · 04-22-09, 07:11 PM

Check w/ Indiandoc, he may still have his

informationjunky · 04-23-09, 06:29 AM

Quote:

Originally Posted by jleeFJ62

Rear bumpers are different, front bumpers are the same
X2 Pics!

He HAD a nice rear bumper on it from a 60, so I assume they fit.

ClemsonCruiser · 04-23-09, 01:06 PM

Quote:

Originally Posted by informationjunky

He HAD a nice rear bumper on it from a 60, so I assume they fit.

well it is now covered in truck bedliner

and it actually doesn't fit; it lines up in some places but not others

IndianDoc · 04-23-09, 08:32 PM

Looking for the lower radiator hose metel piece (with heater heater hose attatchment point) for my 1985 FJ 60 rebirth. Over the time the sucker has grown legs and run off

and I don't think I should fire her up with out the radiator

just a hunch that might be a bad move. Any who any body got one!

eventhough · 04-25-09, 06:29 AM

Quote:

Originally Posted by IndianDoc

Looking for the lower radiator hose metel piece (with heater heater hose attatchment point) for my 1985 FJ 60 rebirth. Over the time the sucker has grown legs and run off

and I don't think I should fire her up with out the radiator

just a hunch that might be a bad move. Any who any body got one!

I got one - repainted too!

I'm around the house today working and can ship. PM sent.

IndianDoc · 04-25-09, 10:33 AM

Thanks Steve PM sent with addie.

proinv · 04-27-09, 10:11 AM

LT275/70R18

4k miles on them, need to go!

MSRP $324.00 -

Selling for $225 obo each

Feel free to PM any questions, thanks.

89s rule · 04-27-09, 10:26 AM

Quote:

Originally Posted by proinv

LT275/70R18

4k miles on them, need to go!

MSRP $324.00 -

Selling for $225 obo

Feel free to PM any questions, thanks.

$225 for 1 or all 4 or 5?

proinv · 04-27-09, 10:47 AM

Quote:

Originally Posted by 89s rule

$225 for 1 or all 4 or 5?

Only have 4 tires, price for each.

mdemeglio · 04-27-09, 02:34 PM

Looking for a 2F motor - if anyone has one they want to sell or maybe knows someone who has one I'd appreciate it.

Also looking for a rear frame crossmember / bumper for a '78 40.

Thanks

jfz80 · 04-27-09, 04:35 PM

mike i might have you set w/ the matching motor to the tranny/xfer you got from me. I wont know for about a month or so and it does not have any accessories as well. Seems his bros. is an ebayaholic. I sent you an email as well.

BELMONT148 · 05-04-09, 10:45 AM

I am looking for a Bellhousing and a set of rear 2F motor mounts for an FJ40. They were on any FJ40 with a 2F from 75'-80' I believe. I hacked up my set off my truck to put my brothers 2F in his FJ60 not realizing I was going to need them 2 months later for my V8 install. Thanks for any help.

I have a very nice looking 2F head from an 87' FJ60 that had 140,000 miles for a trade if anyone is interested. Ran well before my brother seized up the crank on the block.

Jeremy

89s rule · 05-04-09, 10:54 AM

I still have my 62. Still have the parts 60 to go with it or by itself.

Still have the tires that came off the 80, and the 4runner rims and worn out 31's. I think I still have a set of stock 60/62 rims as well. Someone come make an offer and get this stuff.

Still have a gallon of 464 beige paint and a quart of tint.

eventhough · 05-04-09, 10:56 AM

I might have a bellhousing for ya in the garage at home. I'll check when I get home.

Quote:

Originally Posted by BELMONT148

I am looking for a Bellhousing and a set of rear 2F motor mounts for an FJ40. They were on any FJ40 with a 2F from 75'-80' I believe. I hacked up my set off my truck to put my brothers 2F in his FJ60 not realizing I was going to need them 2 months later for my V8 install. Thanks for any help.

I have a very nice looking 2F head from an 87' FJ60 that had 140,000 miles for a trade if anyone is interested. Ran well before my brother seized up the crank on the block.

Jeremy

FJ40-40 · 05-04-09, 06:04 PM

Quote:

Originally Posted by BELMONT148

I am looking for a Bellhousing and a set of rear 2F motor mounts for an FJ40. They were on any FJ40 with a 2F from 75'-80' I believe. I hacked up my set off my truck to put my brothers 2F in his FJ60 not realizing I was going to need them 2 months later for my V8 install. Thanks for any help.

I have a very nice looking 2F head from an 87' FJ60 that had 140,000 miles for a trade if anyone is interested. Ran well before my brother seized up the crank on the block.

Jeremy

PM sent on BH