For Sale / Wanted To Buy

[jmq4]

Looking for a rebuildable Federal carb for a 1978 2F FJ40, or one recently rebuilt or running well, or a basket case with most/all parts to swap onto another. Missing some linkages, couple of screws need replaced, idle adjustment screw, etc.

Thanks

Joe

Posted in general for sale as well

[AGreekBoy]

i have one off a 76 let me know

[jmq4]

AGB:

thanks for the reply, would like to get a 78 if possible, have another for parts and a rebuild kit for that year.

Thanks

Joe

[phrogg4evr]

The 91 is up for sale to make room in the driveway

Linky

http://forum.ih8mud.com/vehicles-tra...astern-nc.html

[jleeFJ62]

not mine

Do you Want a Good Farm/Hunting Vehicle

[35inchoverdrive]

--------------------------------------------------------------------------------

I've got 4-

16x7 black steelies w/ silver plastic hub caps
backspacing- 5in
bolt pattern- 5x114.3mm

They are off of a late model Rav4, but they will also fit several other 5 lug Toyota cars and vans.

I will ship on your dime, using the shipping method of your choice. I have no problem dropping them off at a freight hub. They are boxed up and ready to go.

The boxes are 18x18x9in.
The wheels weigh 20lbs. each.

Shipping will be from 29063.

$40 for all 4 wheels and hub caps.

I'm headed to Boone, NC on Thursday, 3-19-09, and returning on Sunday, 3-22-09, if you wanted to meet on an exit(I-77 or US-321 between Columbia, SC, and Boone, NC).

[J-Bo]

I am looking for a stock 80 series birfield. I want one in case I break while wheeling. If you have any you can part with please let me know.

Thanks

[informationjunky]

1981 toyota landcruiser

[89cruiserfj62]

I have got a pair of jumpseats from an early FJ40 for sale. I think they are for a pre '75 -40. They are the longer model that have a little armrest on one end. they had been rigged into my last fj40 which was a '75. They are in great condition. no rust, one little half-inch long tear, but missing the straps that keep them closed. They are on Craigslist and I had a guy in Minnesota want to buy them but he didnt want to spend the $160 it was gonna cost to ship them. They are in my garage in Greenville, SC. $150 obo for the pair. call or email Stu at (803) 270-4411, or stusaum@gmail.com
Thanks

[89cruiserfj62]

I have a stock carb off of a previous 77 fj40. Rebuilt. $75 Also have a stock exhaust manifold off of that 77 2F.

[eventhough]

Originally Posted by 89cruiserfj62

I have a stock carb off of a previous 77 fj40. Rebuilt. $75 Also have a stock exhaust manifold off of that 77 2F.

Who did the rebuild?

[35inchoverdrive]

Originally Posted by 35inchoverdrive

--------------------------------------------------------------------------------

I've got 4-

16x7 black steelies w/ silver plastic hub caps
backspacing- 5in
bolt pattern- 5x114.3mm

They are off of a late model Rav4, but they will also fit several other 5 lug Toyota cars and vans.

I will ship on your dime, using the shipping method of your choice. I have no problem dropping them off at a freight hub. They are boxed up and ready to go.

The boxes are 18x18x9in.
The wheels weigh 20lbs. each.

Shipping will be from 29063.

$40 for all 4 wheels and hub caps.

I'm headed to Boone, NC on Thursday, 3-19-09, and returning on Sunday, 3-22-09, if you wanted to meet on an exit(I-77 or US-321 between Columbia, SC, and Boone, NC).

NEW PRICE- $10 for all 4. I'm tired of tripping over these.

[jleeFJ62]

If you have an OEM 3f alternator your willing to part with...please PM me

[89cruiserfj62]

My dad did the rebuild with a Toyota rebuild kit. Also have the air cleaner assembly for it.

[Carp]

FOR SALE: Five(5) 33x10.50R15 BFG All-Terrians on 15x8 white wagon wheels. Will check tonight, but bet they have 75% tread left, if not more. No damage,fit my 60 perfectly, just got a screaming deal on some KM2s. $450.

Also, I am looking for a set of 16x7 or 16x8 wheels for my 60. Would be willing to consider FJC wheels if they are priced right.

Trades very much entertained.

[jleeFJ62]

Carp,

Would you be willing to sell one? Just need one for a spare.

Thanks
john

[JMRINS]

Originally Posted by Carp

FOR SALE: Five(5) 33x10.50R15 BFG All-Terrians on 15x8 white wagon wheels. Will check tonight, but bet they have 75% tread left, if not more. No damage,fit my 60 perfectly, just got a screaming deal on some KM2s. $450.

Also, I am looking for a set of 16x7 or 16x8 wheels for my 60. Would be willing to consider FJC wheels if they are priced right.

Trades very much entertained.

Would you break apart, I'd be interested in the tires but not wheels?

[JMRINS]

WTB: 5x8 Utility trailer. I'm about to buy a new one but was wandering if anyone had or knew of a used one for sale. I'd prefer it to be heavy-duty w/ 13-15" wheels and I don't want a homemade deal. Thanks

[wnckeith]

very interested in the tires....still available....how far are you from Hendersonville,NC?

[Carp]

Originally Posted by jleeFJ62

Carp,

Would you be willing to sell one? Just need one for a spare.

Thanks
john

I would prefer to sell all 5 together for now... unless the person who buys them only needs 4

Originally Posted by JMRINS

Would you break apart, I'd be interested in the tires but not wheels?

I would be willing to do that, PM me.

[JMRINS]

Originally Posted by Carp

I would prefer to sell all 5 together for now... unless the person who buys them only needs 4



I would be willing to do that, PM me.

b



Carp, PM sent

[ALEXGAR]

John:

I have one that needs the regulator repaired. FREE to good home.

Originally Posted by jleeFJ62

If you have an OEM 3f alternator your willing to part with...please PM me

[dbenke]

Carp, PM sent

[RumBum]

I'm looking for some parts for a 1970 can of worms I'm opening up:

-2f engine, long shot but figured I ask
-4 spd & transfer case
-40 disc brake axle
-40 springs or full suspension
-fuel tank - no leaks or rust
-front bench seat or covers
-front door glass, 1 piece, old style
-everything else under the hood for an F to 2F conversion

email info or pics to toddblosser@gmail.com

-Todd

[VehiculousFJ]

Originally Posted by RumBum

I'm looking for some parts for a 1970 can of worms I'm opening up:

-2f engine, long shot but figured I ask
-4 spd & transfer case
-40 disc brake axle
-40 springs or full suspension
-fuel tank - no leaks or rust
-front bench seat or covers
-front door glass, 1 piece, old style
-everything else under the hood for an F to 2F conversion

email info or pics to toddblosser@gmail.com

-Todd

Todd, I might have you covered with an engine, 4spd and xfer case. I just bought a wrecked 78 with "200 miles" on the engine. Let me get the drivetrain squared away and I'll let you know.
-Wilson

[jleeFJ62]

I have a set of silver 60 fenders i bought off Gehn a while back. Some rust, but only from a exploded battery on the inside of one fender. Other than that, they look realy good. I bought them with the idea of switching my 62 from four eyes to two eyes. 50 bucks for both. Local pick up perfered.

[cruiser4life]

Originally Posted by Trollhole

WTB 40 series OEM rollbar and Jump seats

Please PM me what you have and pricing you want. If you want to e-mail me pics you can to marshall@828rugs.com

Thank you.

Factory roll bar, $100 in Raleigh:

http://forum.ih8mud.com/sale-parts/2...h-nc-area.html

[3pits]

2 drum factory wheels 10$ each
1 fj62 wheel 10$, rusty back side, but still good
mini truck axel complete hubs, birfs,,,, whole thing 275$
misc parts for disc brake conversion, knuckles, hub bodies, etc, email me with what you need
weber carb, 32/36 was working when pulled , needs work, free for shipping
O $&it bar, some pitting rust free for shipping but still solid
fiberglass hard tops 50$ each
hard top sides 10$ each
front fj40 doors
rear fj40 doors
anyone interested in my 78 40 email me, short list, rebuilt 2f .400 over, chrome headers, new radiator, new water pump, new battery, new cables,,,,, 4speed xfer/trans, rhinolined interior, LOTS of extra parts, 4" lift, weber 38 on it, non usa dizzy, 8274, saginaw power steering, rock finders, er I mean steering correction kit, anti inversion shackles, rock sliders, rock sliderubolt plates, rear tail light protectors,,,, new windshield, new dash, poly gas tank, co2, the list goes on and on.... lets talk

76 rolling chassis, I had more than 2500 into it, will take 1400

[GarnerFJ40]

Originally Posted by RumBum

I'm looking for some parts for a 1970 can of worms I'm opening up:

-2f engine, long shot but figured I ask
-4 spd & transfer case
-40 disc brake axle
-40 springs or full suspension
-fuel tank - no leaks or rust
-front bench seat or covers
-front door glass, 1 piece, old style
-everything else under the hood for an F to 2F conversion

email info or pics to toddblosser@gmail.com

-Todd

I've got a older gas tank, snorkle style, I'll take a look at condition and get some pics to you

[jmq4]

Anyone have a passenger's side horn for a FJ40? Also looking for a set of radiator support rods, have the passenger side, really need longer driver's side.

Thanks

joe (jmq4@bellsouth.net)