For Sale / Wanted To Buy

[steenh]

I have a like new Bowflex Extreme with the 310# upgrade and Lat bar... Need to make some room.

Anyone want it?

$400

[BZEP]

I think I might be interested in the bowflex, do you have a pic or a link of which model it is?

[steenh]

Brian,

Here's a quick pic. I bought it a couple years ago so the exact model isn't on the web site, but it's essentially the same as the Extreme SE model they have.

I don't have the Leg extention add-on.


Thanks,

[lextechautomotive]

I am parting out a 94 80 with 165k, no diff locks, with semi floating rear axle. some front end parts already sold but pm me if interested in any parts will post pics when able to re size them for now jade green with tan leather. interior in rough condition. Location Charleston S.C.29412
Glenn

[Turkeypen]

Glenn,

Whats up with that TLCA number in your signature?

[89s rule]

Originally Posted by lextechautomotive

I am parting out a 94 80 with 165k, no diff locks, with semi floating rear axle. some front end parts already sold but pm me if interested in any parts will post pics when able to re size them for now jade green with tan leather. interior in rough condition. Location Charleston S.C.29412
Glenn

how much for the front seats and the rims?

[Hard40]

http://forum.ih8mud.com/sale-parts/1...eats-sale.html

Cheaper to any club member.

[CruisinTiger]

Ok got some LC stuff to get rid of...all off a 40

side panels for hard top...with cirlce tail lights - 100 a piece(300-500 on cruiserparts)...has back curved glass...needs large glass but cruiser parts has them for 15 bucks
front bezel/bib - 50
heater - 10
spare gas tank - 150...from a mazda....great shape will fit between the frame rails as a long range tank
Bucket seats...100 for pair....need to be recovered if you so desire
cowl - trade for beer or a start from a 85 or later LC
roll bar - trade for beer or anything that I need to my LC

Send me a PM and we'll meet up somewhere.

Thanks, Chuck

[TLCandME]

Hey Chuck -
Dibs on the roll bar if it's not spoken for. Just need to clear time in the calendar for another run to SC. How many cases of beer and what flavor - you had mentioned yuengling (sp?) right. I can probably make it down in January. Thanks!
William Regen

[bbalbano]

Hard top sides and roll bar if the other deal falls through.

Pics to bbalbano@yahoo.com

Thanks
Brian

[CruisinTiger]

PM sent to William and Brian...thanks guys!

[eventhough]

IH8MUD.com Forum - View Single Post - For sale Section

Getting rid of it cheap - $2,500 CASH takes it - see post above for specs - mileage < 182,000 now.

[89s rule]

Can we do a shameless eBay plug on this section? Its non cruiser related, so I figured it wouldnt matter.

36" Proscan TV- Bidding starts at $100
Proscan PS36600 36" TV Very good condition - eBay (item 150200056359 end time Jan-03-08 21:43:32 PST)

51" Pioneer rear projection TV - Bidding starts at $150
51" Pioneer rear projection CRT TV SD-P5073 - eBay (item 150200068404 end time Jan-03-08 22:17:53 PST)

They have both been good, we just dont have the room for them anymore with 2 kids and another on the way. Let me know if you have any questions. Please BID.

[BELMONT148]

Originally Posted by eventhough

IH8MUD.com Forum - View Single Post - For sale Section

Getting rid of it cheap - $2,500 CASH takes it - see post above for specs - mileage < 182,000 now.

How about some pics, and where are you at?

Jeremy

[eventhough]

Originally Posted by BELMONT148

How about some pics, and where are you at?

Jeremy

PM sent - north of Greenville SC and will work on pics.

[craptacular]

I need the early door strikers. I have some doors from a 73, to go on my 1980. Anyone?

[cleanpool2]

pictures of the bucket seats, does it include the rails what year

[CruisinTiger]

Hey Cleanpool and Brian I'll get the pics this weekend...been busy gettin back to work this week....not sure what year the seats are from but they are on the rails.

[89s rule]

Originally Posted by 89s rule

Can we do a shameless eBay plug on this section? Its non cruiser related, so I figured it wouldnt matter.

36" Proscan TV- Bidding starts at $100
Proscan PS36600 36" TV Very good condition - eBay (item 150200056359 end time Jan-03-08 21:43:32 PST)

51" Pioneer rear projection TV - Bidding starts at $150
51" Pioneer rear projection CRT TV SD-P5073 - eBay (item 150200068404 end time Jan-03-08 22:17:53 PST)

They have both been good, we just dont have the room for them anymore with 2 kids and another on the way. Let me know if you have any questions. Please BID.

TV'S SOLD STEREO STUFF STILL AVAIL.

Also have some home stereo stuff that I need to move soon as well. (Receiver, CD player, speakers, etc.)

[cleanpool2]

Hey CruisinTiger
I know you do not know what year the bucket seats are out of but
look at the picture and tell me which style they are. The 73-78 with the vertical side attachment for the seat or the 79-83 with the horizonal attachement to the rail.
picture in Post #6 by Corbinwelter
link
http://forum.ih8mud.com/40-55-series...ml#post2910492

Thanks
Debbie

[Carp]

SOLD!

[Cirbo]

Howdy all,

I have some left over parts from a project truck that I'd like to offer locally before posting for general consumption.

For pictures, please check out the quick page I built at:

For Sale Items

center console $10 --- Moved to Ebay
complete set of front half shafts and birfields $200
Rubber floor mats for front and rear $40 --------------SOLD
reupholstered front seat pair $350----------------------SOLD
roll bar with pads $150
jump seats $225 -- SOLD
steering column $150
pair rear drums, backing plates, shoes, cylinders, and hardware $50
aluminum running boards (pair) $70 -- Moved to Ebay
spare tire mount with hardware $150 -- Moved to Ebay
New brass four core radiator from CCOT $200 -- Sold
blasted and powder coated radiator support $90 -- Moved to Ebay

Parts are located in Fort Mill for local pickup.
Buyer pays any shipping charges.

Please contact me via email at seriesLR(at)gmail(dot)com

TIA,

Jim

[85roktoy]

Sorry if this is against the rules guys. Feel free to delete it if so. My 85 pickup is for sale and here is the link. I'm in Athens GA and will answer any questions that you my have.

Thanks, Wes

eBay Motors: Toyota : SR5 4x4 Pickup (item 220190530700 end time Jan-19-08 21:02:04 PST)

[72cruiser]

sup fellas,

i need to unload some parts, i'll post up more stuff as i come across it.

all parts in nashville, tn 37212 (but i do make regular trips to the upstate through either atlanta or knoxville)


for sale:


1989 fj62 rear axle, complete minus e-brake cable - $250

short style jump seats, one small tear otherwise amazing cond. - $200+shipping

solid half doors made to your specs, cost depends on what you want -
start at $300+shipping
(these will be made from a clean set of early style doors)


i'll post up some pics of this stuff asap


malphrus

[VTCruiser]

hey guys, I have few more parts to sell. Located in Greenville, SC.

NO PMS PLEASE: EMAIL

60 REAR AXLE: $200 local pick-up only!
great shape, open diff, 3.73 gears, complete drum to drum with 3rd, good brakes, no leaks

60 FRONT AXLE: $350 local pick-up only!
greasy from P/S leak but in great shape, open diff, 3.73 gears, complete hub to hub with 3rd, good disk brakes, no leaks, tie rods not included

60 FRAME: $500 local pick-up only!
this frame is in great shape, rot free from Cali, only blemishes are the driver side rear bumper bracket is slightly bent but easily straightened, and there is some surface rust on the passenger side front corner from when a battery exploded.

factory coating intact:




rear sections dirty but solid:




surface rust:


All parts came from a rust-free '86 FJ60 from CA. I had no problems with the axles during the 3,300 mile trip back. also, here's a pic of the donor truck...

[packman]

40 for sale - In my travels today I noticed one for sale on Hwy 8 between I85 and 81. Anyone got any ideas who's it might be. I couldn't stop today but plan to tomorrow.

[boombapslappy]

Was it beige? If so I see that one all the time. Looks good.

[Carp]

Originally Posted by packman

40 for sale - In my travels today I noticed one for sale on Hwy 8 between I85 and 81. Anyone got any ideas who's it might be. I couldn't stop today but plan to tomorrow.

I live 2 miles from this cruiser, and when I was looking for a 40, I always wanted to stop and ask them if it was for sale. But now, I'm looking for a 60 (once my truck sells)...

Anyway, I stopped this morning and looked at it, and here are the particulars:

1977
Mileage Unknown
"350 Corvette Motor"
"Needs Minor work"
$4000
864-356-0096

The truck looked decent. I've seen much worse rust. The driver side wheel well has what looks like heavy rust, but no holes, maybe could be salvaged. Rear sill can be seen in the pics (under the tire carrier, it has some bubbles). It has a spare transfer case in the back. It would need exhaust before too long, (it is running open headers off the 350). These were all of the pictures I could get before the camera died.

If anyone needs any more information, I'd be happy to stop and ask, drive, etc.

[85roktoy]

I'm looking for one of these complete from end to end or close to it. Please let me know if you have anything. Thanks, Wes

[jfz80]

trailer hitches................$50 these very well may fit other years, model of vehicle used on is listed
dodge dakota 05,
dodge grand caravan 97 i believe
jeep cheerokee 99

commercial grade aerator........$600 mud member price
split axle to avoid tearing turf on the turns
solid steel weight bars
replacement tines
4' track