American Racing outlaw II wheels 4

rutbeer · 07-31-08, 10:39 AM

I'm selling four alloy wheels from my 40 series. They are "outlaw II" wheels from American Racing. These were my extra set and I no longer need them. $60 for all four.

Tatortot · 07-31-08, 11:35 AM

What size are they?
What is the back spacing?
I'd like them if they will fit my FJ60.

Where in NC are you?

rutbeer · 07-31-08, 01:03 PM

They are 8x15. You have to run a 1/8" to 1/4" spacer to clear the tie rod ends. That's what I've done for over 10 years. I had this same size wheel on my Tellico truck forever and never had an issue....but I did run longer front wheel studs. zip is 27103

toymaniac · 08-06-08, 10:15 AM

Is there any way you would consider shipping these? They are my dream rim. Thanks

To TX 75602 zip

rutbeer · 08-06-08, 12:09 PM

Let me see if I can find a box suitable....that's going to be the biggest challenge. Either that, or I drop them at Fedex Ground, and have them package them all up and bill you directly.

Copenhagen1 · 08-07-08, 08:05 AM

Quote:

Originally Posted by rutbeer

Let me see if I can find a box suitable....that's going to be the biggest challenge.

If you go down to a retail tire and wheel shop, they sell wheels everyday and just throw away the boxes. In Texas, I would go down to Discount Tire. I am not sure if they have those where you are but you get my idea.

Copenhagen1

rutbeer · 08-08-08, 12:16 PM

Good call on the boxes...Discount Tire had four of them laying there just waiting for me.

I'll get them all boxed up and get a shipping estimate together today or tomorrow.

Copenhagen1 · 08-08-08, 10:03 PM

Quote:

Originally Posted by toymaniac

They are my dream rim.

Quote:

Originally Posted by rutbeer

Good call on the boxes.

I am just glad I could help.

Copenhagen1

rutbeer · 08-09-08, 10:12 PM

[quote=To TX 75602 zip[/QUOTE]

You are looking at about $64 tshipping to get all four to you from here...

jcbutcher · 08-10-08, 10:04 AM

Put me next in line if Toymanic does not take them. I'm inAmarillo,TX 79124 so shipping is about the same maybe a little more. Thanks, John

rutbeer · 08-12-08, 10:07 AM

Quote:

Originally Posted by jcbutcher

Put me next in line if Toymanic does not take them. I'm inAmarillo,TX 79124 so shipping is about the same maybe a little more. Thanks, John

Yeah, just a bit more, about $76 and maybe a bone if you are paying by paypal.

jcbutcher · 08-12-08, 04:27 PM

I don't know what a bone is but I want the wheels. Let me know how you want to be paid and I will comply. My address is:
John Butcher
23 Hogan Drive
Amarillo,TX 79124

Let me know about payment. Thanks, John

DaveFJ80 · 08-13-08, 04:15 PM

I'm running those same wheels (same size, same offset - 3.75" FYI), only mine are black in the center with a machined lip. They fit perfect on a the 80, looks very aggressive when using 1" spacers on 31x10.5x15 tires.

Great wheels & great price. Bump for the seller

rutbeer · 08-13-08, 09:05 PM

SOOOOOOOOOOOOLD. for those soccer fans.

07-31-08, 10:39 AM	#1
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,141	American Racing outlaw II wheels 4 I'm selling four alloy wheels from my 40 series. They are "outlaw II" wheels from American Racing. These were my extra set and I no longer need them. $60 for all four. Attached Images __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

07-31-08, 11:35 AM	#2
Tatortot IH8MUD Junior Join Date: Dec 2006 Location: Greenville, Sc Posts: 160	size and BS What size are they? What is the back spacing? I'd like them if they will fit my FJ60. Where in NC are you? __________________ Tatortot 86 FJ-60 233K, 5.7L, TPI, 27% OD, ARB BUMPER MM 10.5 HYDRO WINCH, 2.5" Parabolic lift, 4+ shackles, OME shocks, DD

07-31-08, 01:03 PM	#3
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,141	They are 8x15. You have to run a 1/8" to 1/4" spacer to clear the tie rod ends. That's what I've done for over 10 years. I had this same size wheel on my Tellico truck forever and never had an issue....but I did run longer front wheel studs. zip is 27103 __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

08-06-08, 12:09 PM	#5
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,141	Let me see if I can find a box suitable....that's going to be the biggest challenge. Either that, or I drop them at Fedex Ground, and have them package them all up and bill you directly. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

08-08-08, 12:16 PM	#7
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,141	Good call on the boxes...Discount Tire had four of them laying there just waiting for me. I'll get them all boxed up and get a shipping estimate together today or tomorrow. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

08-06-08, 10:15 AM	#4
toymaniac IH8MUD Rookie Join Date: Apr 2008 Location: Longview, TX Posts: 15	Is there any way you would consider shipping these? They are my dream rim. Thanks To TX 75602 zip

08-09-08, 10:12 PM	#9
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,141	[quote=To TX 75602 zip[/QUOTE] You are looking at about $64 tshipping to get all four to you from here... __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

08-10-08, 10:04 AM	#10
jcbutcher IH8MUD Junior Join Date: Feb 2007 Location: Amarillo,TX Posts: 100	wheels Put me next in line if Toymanic does not take them. I'm inAmarillo,TX 79124 so shipping is about the same maybe a little more. Thanks, John __________________ JC Butcher Location: Amarillo,TX "Every thing I know I learned from someone else"

08-12-08, 04:27 PM	#12
jcbutcher IH8MUD Junior Join Date: Feb 2007 Location: Amarillo,TX Posts: 100	wheels I don't know what a bone is but I want the wheels. Let me know how you want to be paid and I will comply. My address is: John Butcher 23 Hogan Drive Amarillo,TX 79124 Let me know about payment. Thanks, John __________________ JC Butcher Location: Amarillo,TX "Every thing I know I learned from someone else"

08-13-08, 04:15 PM	#13
DaveFJ80 IH8MUD Rookie Join Date: Jan 2008 Location: Hollywood, CA Posts: 28	I'm running those same wheels (same size, same offset - 3.75" FYI), only mine are black in the center with a machined lip. They fit perfect on a the 80, looks very aggressive when using 1" spacers on 31x10.5x15 tires. Great wheels & great price. Bump for the seller __________________ 91 FJ80

08-13-08, 09:05 PM	#14
rutbeer IH8MUD Lifer Join Date: Jun 2004 Location: North Carolina Posts: 1,141	SOOOOOOOOOOOOLD. for those soccer fans. __________________ 78FJ40 w/13BT diesel (BIESEL),66FJ45(MARMUT), 13BT install thread www.importpurist.com "Much like a cat or hot buttered toast, the correct side will always try to land down. If the bezel is on upside down, then the force of it trying to right itself may cause you to roll your cruiser unexpectedly."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode