 | 
07-08-09, 11:08 PM
|
#1 (permalink)
| | Supporting Vendor
Join Date: Jan 2003 Location: Cranbrook, B.C., Canada
Posts: 9,390
| Aftermarket gauges, oil press, water temp, etc.
I bought a lot of gauges in order to get a few I needed for my truck. These are the extras. I know alot of folks want aftermarket oil pressure and water temperature gauges since the stock gauges are rumored to be inaccurate. I'm OK with them and just needed a couple extras like volt meter on the '55 and boost and pyrometer on my diesels. I use this brand on my trucks and like them.
These are all new, in the box gauges at much less than retail.
I have the following gauges, all are Isspro brand 2 1/16":
model R5632 mech. water temp. R5632 - ISSPRO EV Auto - White Pointers: Engine Temperature Gauges (Mechanical) - egauges.com $20/ea
model R5631 mechanical water temp. R5631 - ISSPRO EV Auto - White Pointers: Engine Temperature Gauges (Mechanical) - egauges.com $20
2 @ model R6775 vacuum gauge R6775 - ISSPRO EV Marine - White Pointers: Vacuum Pressure Gauges - egauges.com $20/ea.
Shipping is not included. I can deliver if you are on my route south over the next month or so (primarily the western states).
I'll be putting these on Ebay in a week or so.
__________________ '82 BJ60 H55 tranny, AXT turbo 3B diesel, high nickel alloy head, A/C, BDS lift, factory PTO, Aussie rear locker, OEM LSD front, 4:11's, 32's, PERFECT frame!
'76 FJ55, 3B turbo, alloy head, H41 tranny, 3 sp. transfer, 33's, A/C, PTO winch, long range tank!
'67 FJ45LV shop project c/w 3B turbo diesel transplant & H41 4 speed, 3 speed transfer, PTO! www.wirrell.com 
Last edited by cruiser_guy; 07-12-09 at 09:12 PM.
Reason: Removed sold items
| 
|  |
|
07-09-09, 06:34 AM
|
#2 (permalink)
| | Pinoy 4WD Journey
Join Date: Jul 2004 Location: on the right coast
Posts: 2,052
| Are these gauges made in USA? If so I'm interested in mechanical oil press and voltmeter.
__________________
Noel
97 LX450 unlock, IH8MUD decals, CDL/Pin7, HIRs, Cup Holder, 100 pads, GS LEDs, OEM grab bar, sidemarkers, ARB bar/XD9000, PIAA 520, 295/75R16 NTG, Kaymar Deluxe/tire carrier, OME850J/863, Slee speedo gear/SS brakelines/caster plates, ARB fridge, silicone PHH/FHH, Xantrex 1750 inverter, auto up and H2O temp mods. Need install: OEM subtank, BIC 95300B dual batt, blue fan clutch, OEM rear locker, 2.2kw...
94 4Runner, OEM 4.88 gear, V6 3VZE
04 Taco Ext Cab SR5 V6 TRD RR DIFF LOCK, sliders
| 
| | |
07-09-09, 08:35 AM
|
#3 (permalink)
| | Supporting Vendor
Join Date: Jan 2003 Location: Cranbrook, B.C., Canada
Posts: 9,390
| Quote:
Originally Posted by 4x4CPOSEADOG  Are these gauges made in USA? If so I'm interested in mechanical oil press and voltmeter. | I don't know exactly where each gauge is physically made (most stuff is made overseas no matter who actually sells it). Isspro is out of Portland, Oregon. You can find the company on the web at ISSPRO.com Your home for quality Gauges, Tachometers, Speedometers, and more!
__________________ '82 BJ60 H55 tranny, AXT turbo 3B diesel, high nickel alloy head, A/C, BDS lift, factory PTO, Aussie rear locker, OEM LSD front, 4:11's, 32's, PERFECT frame!
'76 FJ55, 3B turbo, alloy head, H41 tranny, 3 sp. transfer, 33's, A/C, PTO winch, long range tank!
'67 FJ45LV shop project c/w 3B turbo diesel transplant & H41 4 speed, 3 speed transfer, PTO! www.wirrell.com | |
| | |
07-10-09, 08:24 AM
|
#4 (permalink)
| | Supporting Vendor
Join Date: Jan 2003 Location: Cranbrook, B.C., Canada
Posts: 9,390
| Bump for a great deal on aftermarket gauges.
__________________ '82 BJ60 H55 tranny, AXT turbo 3B diesel, high nickel alloy head, A/C, BDS lift, factory PTO, Aussie rear locker, OEM LSD front, 4:11's, 32's, PERFECT frame!
'76 FJ55, 3B turbo, alloy head, H41 tranny, 3 sp. transfer, 33's, A/C, PTO winch, long range tank!
'67 FJ45LV shop project c/w 3B turbo diesel transplant & H41 4 speed, 3 speed transfer, PTO! www.wirrell.com | |
| | |
07-10-09, 08:33 AM
|
#5 (permalink)
| | Have you seen my stapler?
Join Date: Aug 2002 Location: Elkhart, Indiana
Posts: 1,233
| I'm interested in the following...
model R5630 mechanical water temp. R5630 - ISSPRO EV Auto - White Pointers: Engine Temperature Gauges (Mechanical) - egauges.com $20
model R5690 fuel gauge R5690 - ISSPRO EV Auto - White Pointers: Fuel Level Gauges - egauges.com $10
model R6760 voltmeter R6760 - ISSPRO EV Marine - White Pointers: Voltmeters - 12 Volts - egauges.com $10
model R5601 mechanical oil press. R5601 - ISSPRO EV Auto - White Pointers: Engine Pressure Gauges (Mechanical) - egauges.com $20
This sounds like $60 plus shipping to zip code 46516. You take PayPal, or prefer a check?
Luke
__________________ Quote:
Originally Posted by 4rnr I spend all day looking at fab porn on Pirate and I have a million ideas I want to see if I can fail at.... | Quote:
Originally Posted by Joe_E Who are you, Nostrodumbass? | 1998 4Runner Limited
1976 FJ40 Bugly, TBI 2F,4 speed, toybox, minitruck t-case, 418:1, 3 link, 4 link, coils, HP 60, 14 bolt, ARBs, caged, 42" IROKs
1964 FJ45SWB SOA,SR,383SBC,SM465,NP203/205,ARBs,Longfield Inners & Outers,36"Swampers,Caged eternal project
Hoosier Cruisers | |
| | |
07-10-09, 10:15 AM
|
#6 (permalink)
| | Supporting Vendor
Join Date: Jan 2003 Location: Cranbrook, B.C., Canada
Posts: 9,390
| Quote:
Originally Posted by LukeZero I'm interested in the following...
model R5630 mechanical water temp. R5630 - ISSPRO EV Auto - White Pointers: Engine Temperature Gauges (Mechanical) - egauges.com $20
model R5690 fuel gauge R5690 - ISSPRO EV Auto - White Pointers: Fuel Level Gauges - egauges.com $10
model R6760 voltmeter R6760 - ISSPRO EV Marine - White Pointers: Voltmeters - 12 Volts - egauges.com $10
model R5601 mechanical oil press. R5601 - ISSPRO EV Auto - White Pointers: Engine Pressure Gauges (Mechanical) - egauges.com $20
This sounds like $60 plus shipping to zip code 46516. You take PayPal, or prefer a check?
Luke | Paypal is the best way right now. I'll send you a PM.
__________________ '82 BJ60 H55 tranny, AXT turbo 3B diesel, high nickel alloy head, A/C, BDS lift, factory PTO, Aussie rear locker, OEM LSD front, 4:11's, 32's, PERFECT frame!
'76 FJ55, 3B turbo, alloy head, H41 tranny, 3 sp. transfer, 33's, A/C, PTO winch, long range tank!
'67 FJ45LV shop project c/w 3B turbo diesel transplant & H41 4 speed, 3 speed transfer, PTO! www.wirrell.com | |
| | |
07-10-09, 10:30 AM
|
#7 (permalink)
| | Have you seen my stapler?
Join Date: Aug 2002 Location: Elkhart, Indiana
Posts: 1,233
| You've got money!
Thanks,
Luke
__________________ Quote:
Originally Posted by 4rnr I spend all day looking at fab porn on Pirate and I have a million ideas I want to see if I can fail at.... | Quote:
Originally Posted by Joe_E Who are you, Nostrodumbass? | 1998 4Runner Limited
1976 FJ40 Bugly, TBI 2F,4 speed, toybox, minitruck t-case, 418:1, 3 link, 4 link, coils, HP 60, 14 bolt, ARBs, caged, 42" IROKs
1964 FJ45SWB SOA,SR,383SBC,SM465,NP203/205,ARBs,Longfield Inners & Outers,36"Swampers,Caged eternal project
Hoosier Cruisers | |
| | |
07-10-09, 11:16 AM
|
#8 (permalink)
| | Pinoy 4WD Journey
Join Date: Jul 2004 Location: on the right coast
Posts: 2,052
| Payment sent!
__________________
Noel
97 LX450 unlock, IH8MUD decals, CDL/Pin7, HIRs, Cup Holder, 100 pads, GS LEDs, OEM grab bar, sidemarkers, ARB bar/XD9000, PIAA 520, 295/75R16 NTG, Kaymar Deluxe/tire carrier, OME850J/863, Slee speedo gear/SS brakelines/caster plates, ARB fridge, silicone PHH/FHH, Xantrex 1750 inverter, auto up and H2O temp mods. Need install: OEM subtank, BIC 95300B dual batt, blue fan clutch, OEM rear locker, 2.2kw...
94 4Runner, OEM 4.88 gear, V6 3VZE
04 Taco Ext Cab SR5 V6 TRD RR DIFF LOCK, sliders
| |
| | |
07-10-09, 02:15 PM
|
#9 (permalink)
| | Supporting Vendor
Join Date: Jan 2003 Location: Cranbrook, B.C., Canada
Posts: 9,390
| Revised with items paid for.
__________________ '82 BJ60 H55 tranny, AXT turbo 3B diesel, high nickel alloy head, A/C, BDS lift, factory PTO, Aussie rear locker, OEM LSD front, 4:11's, 32's, PERFECT frame!
'76 FJ55, 3B turbo, alloy head, H41 tranny, 3 sp. transfer, 33's, A/C, PTO winch, long range tank!
'67 FJ45LV shop project c/w 3B turbo diesel transplant & H41 4 speed, 3 speed transfer, PTO! www.wirrell.com | |
| | |
07-11-09, 06:47 PM
|
#10 (permalink)
| | Supporting Vendor
Join Date: Jan 2003 Location: Cranbrook, B.C., Canada
Posts: 9,390
| Bump! Check out the vacuum gauges. Higher manifold vacuum on a gasser means lower fuel consumption and we'd all like that!
__________________ '82 BJ60 H55 tranny, AXT turbo 3B diesel, high nickel alloy head, A/C, BDS lift, factory PTO, Aussie rear locker, OEM LSD front, 4:11's, 32's, PERFECT frame!
'76 FJ55, 3B turbo, alloy head, H41 tranny, 3 sp. transfer, 33's, A/C, PTO winch, long range tank!
'67 FJ45LV shop project c/w 3B turbo diesel transplant & H41 4 speed, 3 speed transfer, PTO! www.wirrell.com | |
| | |
07-12-09, 09:12 PM
|
#11 (permalink)
| | Supporting Vendor
Join Date: Jan 2003 Location: Cranbrook, B.C., Canada
Posts: 9,390
| More gauges sold! Don't loose out!
__________________ '82 BJ60 H55 tranny, AXT turbo 3B diesel, high nickel alloy head, A/C, BDS lift, factory PTO, Aussie rear locker, OEM LSD front, 4:11's, 32's, PERFECT frame!
'76 FJ55, 3B turbo, alloy head, H41 tranny, 3 sp. transfer, 33's, A/C, PTO winch, long range tank!
'67 FJ45LV shop project c/w 3B turbo diesel transplant & H41 4 speed, 3 speed transfer, PTO! www.wirrell.com | |
| | |
07-29-09, 11:03 AM
|
#12 (permalink)
| | Have you seen my stapler?
Join Date: Aug 2002 Location: Elkhart, Indiana
Posts: 1,233
| Got the gauges today! Thanks for getting them out.
Luke
__________________ Quote:
Originally Posted by 4rnr I spend all day looking at fab porn on Pirate and I have a million ideas I want to see if I can fail at.... | Quote:
Originally Posted by Joe_E Who are you, Nostrodumbass? | 1998 4Runner Limited
1976 FJ40 Bugly, TBI 2F,4 speed, toybox, minitruck t-case, 418:1, 3 link, 4 link, coils, HP 60, 14 bolt, ARBs, caged, 42" IROKs
1964 FJ45SWB SOA,SR,383SBC,SM465,NP203/205,ARBs,Longfield Inners & Outers,36"Swampers,Caged eternal project
Hoosier Cruisers | |
| | |
08-16-09, 07:41 PM
|
#13 (permalink)
| | Supporting Vendor
Join Date: Jan 2003 Location: Cranbrook, B.C., Canada
Posts: 9,390
| Still have a couple of vacuum gauges and water temp gauges left. Any takers?
The vacuum gauges will help with tuneups as well as economical driving (higher vacuum is less fuel use). The water temps will help confirm or disprove the factory temp gauge or give you real numbers instead of simply "at the first red line".
__________________ '82 BJ60 H55 tranny, AXT turbo 3B diesel, high nickel alloy head, A/C, BDS lift, factory PTO, Aussie rear locker, OEM LSD front, 4:11's, 32's, PERFECT frame!
'76 FJ55, 3B turbo, alloy head, H41 tranny, 3 sp. transfer, 33's, A/C, PTO winch, long range tank!
'67 FJ45LV shop project c/w 3B turbo diesel transplant & H41 4 speed, 3 speed transfer, PTO! www.wirrell.com | |
| | |
| Thread Tools | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off
| | |
|  | |
cruiser_guy
4x4CPOSEADOG
LukeZero
Bugly
