1978 fine splines, 1971/72 transfer, 4x4 labs high steer and more goodies...

DIESEL40 · 09-23-08, 10:04 AM

advance adaptors rear cross brace for transfercase (slight bend from my engine hoist giving way-does not effect anything other than adjusting the mount on the frame) $50 shipped in lower 48.

Warn Bellview winch with cable controls (works great)-$400

rear corner glass from 1978+ hard top (have several of these)-$25 shipped

small side glass window from 1978+ hard top (have several of these)-$20 shipped

large side glass window from 1978 + hard top (have several of these)-$30 shipped

chevy 350 distributor-$20 shipped

1980 set of barn doors in good shape-$175 shipped

1980 bib and bezel (good shape)-$200 shipped

1978 windshield frame and windshield (some surface rust wear hardware attaches)-$200 shipped

1980 windshield frame (very small dent at the top where the washer fluid comes out), no glass-$100 shipped

adaptor (got from degnol) fits older style cruisers (was on my 1970) with corvette 4 disc master cylinder-$50 shipped

toyota bottle 2 ton bottle jack (just the bottle jack with nothing else)-$25 shipped

1970 tub in good condition $500 you pick up

1970 frame sanded and coated with anti rust and is set up for spring over with shackle reversal, comes with springs still attached, can include axles minus thirds, birfields, and lockouts (large pattern knuckles up front) $500 you pick up

all of these are obo and I have more to come

vtcruiser60 · 09-23-08, 10:13 AM

PM sent on the longfields....

Okie_dave · 09-23-08, 10:28 AM

Next in line for birfields.

Poser · 09-23-08, 10:35 AM

Quote:

Originally Posted by DIESEL40

space ghost adaptor with bearing needed for conversion-$170 shipped in lower 48.

420 or 465 plate?

DIESEL40 · 09-23-08, 11:24 AM

Poser,
It is for a 420

!
Thanks for pointing that out!

bigassbike · 09-23-08, 11:30 AM

I am interested in tcase if it will work for my setup.

pm on the way.

RredFJ40 · 09-23-08, 12:58 PM

High steer for a 40 I presume?

vtcruiser60 · 09-23-08, 01:16 PM

pm followup on the longfields

bigassbike · 09-23-08, 02:04 PM

Thanks DIESEL40! Sounds good! rmineer@verizon.net payment information. I really appreciate it.

DIESEL40 · 09-23-08, 02:34 PM

Quote:

Originally Posted by RredFJ40

High steer for a 40 I presume?

Yes it was!

mano002 · 09-25-08, 03:07 PM

is the hysteer for the large or small pattern knuckle bolt pattern.

bigassbike · 10-01-08, 04:19 PM

Got the Tcase!
Thanks!

DIESEL40 · 10-02-08, 11:59 AM

Bump with more stuff added!

Volunteer · 10-02-08, 04:38 PM

Adaptor (got from degnol) fits older style cruisers (was on my 1970) with corvette 4 disc master cylinder-$50 shipped.

Can you send me a pic of this please to larry@bslca.com

Poser · 10-02-08, 04:50 PM

PM on lockouts...

Theycallmenica · 10-02-08, 06:13 PM

PM on birfield and aisin hubs

Theycallmenica · 10-03-08, 01:01 PM

check ur paypal

DIESEL40 · 10-10-08, 09:47 AM

Quote:

Originally Posted by Theycallmenica

check ur paypal

Funds will clear on the 22nd. I will ship when they clear.

Bump to the top. Make offers if you don't like the prices.

predcrzy · 11-06-08, 08:30 PM

Can you send me a picture of the 1978 and 1980 windshields you have?
Thanks

bigjhoov · 11-06-08, 10:31 PM

pm sent

bigjhoov · 11-06-08, 10:34 PM

or not.......

The following errors occurred with your submission:

DIESEL40 has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

65swb45 · 11-07-08, 12:29 AM

Assuming the 1980 windshield frame is not rusty, I will buy it. PM me your paypal address. Note: I will be offline til Sunday night.

woytovich · 11-07-08, 07:47 AM

Can't tell what's up with the Hi steer... still available?

Your PM box is full...

The HS is what part number?
4x4Labs Hi-Steer

Okie_dave · 11-07-08, 08:17 AM

Hi-steer, axles, and boggers are in my shop. I will try and give him a call today and let him know you guys are looking for his parts.

predcrzy · 11-07-08, 03:55 PM

Do you still have the 1978 fj40 windshield for sale?

bigjhoov · 11-07-08, 04:10 PM

Need small hardtop window glass

predcrzy · 11-07-08, 04:19 PM

What will you take for both of the 1978 and the 1980 windshields?

Poser · 11-07-08, 07:47 PM

DIESEL40-

I hope things are going OK for you. Please get in touch with me concerning the parts that I paid for and have yet to recieve.

Thank you.

-Steve

bigjhoov · 11-13-08, 10:39 AM

Bueller?
Bueller?

09-23-08, 10:04 AM	#1
DIESEL40 IH8MUD Regular Join Date: Oct 2004 Location: Carthage, MO Posts: 216	1978 fine splines, 1971/72 transfer, 4x4 labs high steer and more goodies... advance adaptors rear cross brace for transfercase (slight bend from my engine hoist giving way-does not effect anything other than adjusting the mount on the frame) $50 shipped in lower 48. Warn Bellview winch with cable controls (works great)-$400 rear corner glass from 1978+ hard top (have several of these)-$25 shipped small side glass window from 1978+ hard top (have several of these)-$20 shipped large side glass window from 1978 + hard top (have several of these)-$30 shipped chevy 350 distributor-$20 shipped 1980 set of barn doors in good shape-$175 shipped 1980 bib and bezel (good shape)-$200 shipped 1978 windshield frame and windshield (some surface rust wear hardware attaches)-$200 shipped 1980 windshield frame (very small dent at the top where the washer fluid comes out), no glass-$100 shipped adaptor (got from degnol) fits older style cruisers (was on my 1970) with corvette 4 disc master cylinder-$50 shipped toyota bottle 2 ton bottle jack (just the bottle jack with nothing else)-$25 shipped 1970 tub in good condition $500 you pick up 1970 frame sanded and coated with anti rust and is set up for spring over with shackle reversal, comes with springs still attached, can include axles minus thirds, birfields, and lockouts (large pattern knuckles up front) $500 you pick up all of these are obo and I have more to come __________________ 70 FJ40 - Diesel! Last edited by DIESEL40; 10-10-08 at 09:45 AM.

09-23-08, 10:13 AM	#2
vtcruiser60 IH8MUD Lifer Join Date: Sep 2003 TLCA# 15129 Posts: 1,405	PM sent on the longfields.... __________________ Buy my PTO Winch Shift Plate--Custom Reproduction http://forum.ih8mud.com/merchandise-...ml#post3570639

09-23-08, 10:28 AM	#3
Okie_dave IH8MUD Regular Join Date: Jan 2005 Location: Tulsa, OK TLCA# 16598 Posts: 424	Next in line for birfields. __________________ Dave Stinchcomb Green Country Cruisers 1981 FJ60 1976 FJ40 1966 FJ40

09-23-08, 11:24 AM	#5
DIESEL40 IH8MUD Regular Join Date: Oct 2004 Location: Carthage, MO Posts: 216	Poser, It is for a 420 ! Thanks for pointing that out! __________________ 70 FJ40 - Diesel!

09-23-08, 11:30 AM	#6
bigassbike IH8MUD Regular Join Date: Jun 2007 Location: Rancho Cucamonga, CA Posts: 279	I am interested in tcase if it will work for my setup. pm on the way. __________________ http://www.rustyonline.net

09-23-08, 12:58 PM	#7
RredFJ40 IH8MUD Lifer Join Date: Nov 2003 Location: Klamath Basin TLCA# 14992 Posts: 1,123	High steer for a 40 I presume? __________________ Joel ----- Parting an FJ62 - PM me "Birds have nests, foxes have dens but the hope of the whole world lay on the shoulders of a homeless man." - R. Mullins 82 FJ60 - normal stuff 68 FJ40 - gone 88 FJ62 - gone Jefferson State Cruisers

09-23-08, 01:16 PM	#8
vtcruiser60 IH8MUD Lifer Join Date: Sep 2003 TLCA# 15129 Posts: 1,405	pm followup on the longfields __________________ Buy my PTO Winch Shift Plate--Custom Reproduction http://forum.ih8mud.com/merchandise-...ml#post3570639

09-23-08, 02:04 PM	#9
bigassbike IH8MUD Regular Join Date: Jun 2007 Location: Rancho Cucamonga, CA Posts: 279	Thanks DIESEL40! Sounds good! rmineer@verizon.net payment information. I really appreciate it. __________________ http://www.rustyonline.net

09-25-08, 03:07 PM	#11
mano002 Great White North Join Date: Mar 2002 Location: Calgary AB Canada TLCA# 17052 Posts: 78	is the hysteer for the large or small pattern knuckle bolt pattern. __________________ 1978 FJ40, SR & SUA Fr, SOA Rr, Stock PS Summer: 34x9.5 TSL. Winter: 35x12.5 BFG AT Rocky Mountian Landcruiser Asssociation

10-01-08, 04:19 PM	#12
bigassbike IH8MUD Regular Join Date: Jun 2007 Location: Rancho Cucamonga, CA Posts: 279	Got the Tcase! Thanks! __________________ http://www.rustyonline.net

10-02-08, 11:59 AM	#13
DIESEL40 IH8MUD Regular Join Date: Oct 2004 Location: Carthage, MO Posts: 216	Bump with more stuff added! __________________ 70 FJ40 - Diesel!

10-02-08, 04:38 PM	#14
Volunteer IH8MUD "I Live Here" Join Date: May 2006 Location: In The Shop TLCA# 16325 Posts: 5,338	Adaptor (got from degnol) fits older style cruisers (was on my 1970) with corvette 4 disc master cylinder-$50 shipped. Can you send me a pic of this please to larry@bslca.com __________________ Obama = O$hit Bayou State Land Cruiser Assoc BSLCA.com My toys past and present.

10-02-08, 04:50 PM	#15
Poser Oh...Durka Durka Durka. Join Date: Oct 2003 Location: in the shop TLCA# 1856 Posts: 14,192	PM on lockouts...

10-02-08, 06:13 PM	#16
Theycallmenica IH8MUD Junior Join Date: Mar 2007 Location: Los Angeles CA Posts: 76	PM on birfield and aisin hubs

10-03-08, 01:01 PM	#17
Theycallmenica IH8MUD Junior Join Date: Mar 2007 Location: Los Angeles CA Posts: 76	check ur paypal

11-07-08, 12:29 AM	#22
65swb45 elder statesman Join Date: Apr 2004 Location: so cal, going 45 TLCA# 1086 Posts: 6,803	Assuming the 1980 windshield frame is not rusty, I will buy it. PM me your paypal address. Note: I will be offline til Sunday night. __________________ A carbureted man in a fuel injected world. 65SWB45, 64LWB45, 68FJ40,72V840, 76HJ45[going],84FJ60[gone], 76K5, 73Sub454, 89Sub7.4[gone], 97Sub5.7 TLCA delegate, Trail Crew-LAC TLCA, The White Trash of the Elwood Chapter my website: http://www.marksoffroad.net

11-06-08, 08:30 PM	#19
predcrzy IH8MUD Rookie Join Date: Oct 2008 Posts: 6	Can you send me a picture of the 1978 and 1980 windshields you have? Thanks

11-06-08, 10:31 PM	#20
bigjhoov IH8MUD Junior Join Date: Nov 2005 Location: Rockwall, TX Posts: 130	pm sent __________________ '78 FJ40

11-06-08, 10:34 PM	#21
bigjhoov IH8MUD Junior Join Date: Nov 2005 Location: Rockwall, TX Posts: 130	or not....... The following errors occurred with your submission: DIESEL40 has exceeded their stored private messages quota and cannot accept further messages until they clear some space. __________________ '78 FJ40

11-07-08, 07:47 AM	#23
woytovich IH8MUD Lifer Join Date: Sep 2003 Location: Metro NY TLCA# 8334 Posts: 1,555	Can't tell what's up with the Hi steer... still available? Your PM box is full... The HS is what part number? 4x4Labs Hi-Steer __________________ Mark [ mark@woytovich.com ] Metro NY Founding member, Gotham City Land Cruisers 85FJ60 ~ 78ishFJ40 ~ M-416 ~ Trillium 4500

11-07-08, 08:17 AM	#24
Okie_dave IH8MUD Regular Join Date: Jan 2005 Location: Tulsa, OK TLCA# 16598 Posts: 424	Hi-steer, axles, and boggers are in my shop. I will try and give him a call today and let him know you guys are looking for his parts. __________________ Dave Stinchcomb Green Country Cruisers 1981 FJ60 1976 FJ40 1966 FJ40

11-07-08, 03:55 PM	#25
predcrzy IH8MUD Rookie Join Date: Oct 2008 Posts: 6	Do you still have the 1978 fj40 windshield for sale?

11-07-08, 04:10 PM	#26
bigjhoov IH8MUD Junior Join Date: Nov 2005 Location: Rockwall, TX Posts: 130	Need small hardtop window glass __________________ '78 FJ40

11-07-08, 04:19 PM	#27
predcrzy IH8MUD Rookie Join Date: Oct 2008 Posts: 6	What will you take for both of the 1978 and the 1980 windshields?

11-07-08, 07:47 PM	#28
Poser Oh...Durka Durka Durka. Join Date: Oct 2003 Location: in the shop TLCA# 1856 Posts: 14,192	DIESEL40- I hope things are going OK for you. Please get in touch with me concerning the parts that I paid for and have yet to recieve. Thank you. -Steve

11-13-08, 10:39 AM	#29
bigjhoov IH8MUD Junior Join Date: Nov 2005 Location: Rockwall, TX Posts: 130	Bueller? Bueller? __________________ '78 FJ40

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode