60 Series: grey interior, rust free frame, misc.

VTCruiser · 07-24-07, 07:07 AM

I have a bunch of parts from a 1986 california FJ60 261k...

Location: Greenville, SC 29607
LOP = Local Pickup Only
+S = Plus Shipping

INTERIOR: mostly complete, grey, dirty
Basically, anything grey of the interior is available. front seat, not it good shape, especially the drivers (usual wear), passenger is better, one small hole (cig?), both are filthy. The rear seats are okay, a couple small holes, cleaner. The dash pad has cracks, carpets are dirty and pretty faded. Door and side panels are decent and should clean-up well, grab handles also available, only one front seatbelt available, but both rears.
- I am accepting offers for all this stuff due to condition. Large items (seats, dash etc) are local pickup only.

CHASSIS: solid, minimal rust, good overall condition (to be available in a few weeks)
- Frame - good shape, no rot, only surface rust where a leaky battery stripped the paint off the front right corner factory coating otherwise intact. Skid plates and cross members not included. [$300, LPO]
- Front Axle – good shape, original 3.70 gears, complete aisin hub to aisin hub, good brakes, oily from leaky power steering but not rusty, no apparent leaks, steering not included. [$200, LPO]
- Rear axle - good shape, original 3.70 gears, complete drum to drum, good brakes, e-brake works great, not rusty, no leaks. [$150, LPO]

MISC
- Carb Fan - works good, clean [$20, +S]
- H42 shift lever - avg condition [$10, +S]
- Passenger side "snake blinder" trim - avg condition, needs clips [$10, +S]

Pics to come, all prices negotiable.

No PMs please, EMAIL

Thanks!

79fj40moneypit · 07-24-07, 07:15 AM

pm/email sent Sh## I thought you were in VT.

VTCruiser · 07-24-07, 08:02 AM

yeah, "home" is VT but i am currently in SC, as are these parts.

79fj40moneypit · 07-24-07, 08:06 AM

Damn! If you get time call me if you could.

VTCruiser · 07-25-07, 09:14 PM

btt

VTCruiser · 07-28-07, 09:05 AM

it interior has all been pulled, need to get rid of it...

ALEXGAR · 07-29-07, 12:38 PM

3.70 on a FJ60?

I used to think they were all 4.11?

VTCruiser · 07-29-07, 01:48 PM

yup, 62's were 4.11

VTCruiser · 07-31-07, 05:32 PM

All Pics

VTCruiser · 08-01-07, 10:37 AM

i need this stuff GONE! just make me an offer that's worth my time, and they are yours.

The "big" stuff gets thrown out AUG. 17th.

mkaustin · 08-01-07, 01:52 PM

Do you have the rear drive shaft??

VTCruiser · 08-01-07, 02:26 PM

Quote:

Originally Posted by mkaustin

Do you have the rear drive shaft??

nope, i'm keeping it!

tigertowncruiser · 08-02-07, 02:50 AM

If it was a 3fe , do you have the erg valve? i'm in clemson

VTCruiser · 08-02-07, 04:58 AM

Quote:

Originally Posted by tigertowncruiser

If it was a 3fe , do you have the erg valve? i'm in clemson

sorry, 2F and it went with the engine to marshall.

Rigger · 08-02-07, 08:40 AM

I need:

1) a hub

2) a drivers side rear tail light lens

3) and whaddya want for the round dash vents that open and close. I think I can swap these into the center of my dash, can't I? Are they black?

VTCruiser · 08-02-07, 08:52 AM

Quote:

Originally Posted by Rigger

I need:

1) a hub

2) a drivers side rear tail light lens

3) and whaddya want for the round dash vents that open and close. I think I can swap these into the center of my dash, can't I? Are they black?

1) I'd like to try and sell the axles complete if i can.

2) no tail light lenses avaiable, yet

3) yes and yes. $5 ea. +S? email me....

VTCruiser · 08-13-07, 04:05 PM

okay guys, last week for the big stuff for real.....going in the trash friday....

landcruiserjunky · 08-13-07, 08:38 PM

PM'd

VTCruiser · 08-21-07, 08:35 AM

okay, I chucked a bunch of the big, not-in-good-shape stuff but kept some of the little stuff. I will re-invetory shortly...

Spike Strip · 08-21-07, 12:10 PM

Pm Sent...

g-man · 08-28-07, 06:12 PM

1. cup holder if its not cracked

2. one good door pull

3. the 2 outer vents...the ones that can close.

shipped to 22963.

g-man · 08-28-07, 06:14 PM

4. front seat belt receivers if the plastic is not cracked. thanks for checking.

VTCruiser · 08-28-07, 06:45 PM

g-man, please send me an email at the link in the first post. Thanks!

third coast cruisers · 08-29-07, 05:54 AM

do you still have:

1: front passenger seat? i really need just the upolstery for the seat and the bottom cushion. hell if no one took the rear seat send me the material for it as well.

2: passenger cargo wall panel

3: two center dash vents

4: how's the dash pad look? if good i mean no cracks include in price.

5: is that a dash grab bar i see in the first photo. if so i need that as well.

send me price on these.

VTCruiser · 08-29-07, 08:21 AM

Quote:

Originally Posted by third coast cruisers

do you still have:

1: front passenger seat? i really need just the upolstery for the seat and the bottom cushion. hell if no one took the rear seat send me the material for it as well.

2: passenger cargo wall panel

3: two center dash vents

4: how's the dash pad look? if good i mean no cracks include in price.

5: is that a dash grab bar i see in the first photo. if so i need that as well.

send me price on these.

Please send me an email! it is easier for me to keep track of everything in my inbox. Thanks!