I cleaned my shed... $1 plus shipping!!!

2ndGenToyotaFan · 06-26-07, 11:44 PM

Found a few things I don't need, thought maybe someone could use them.

First, some tow/strap loops for the front of mid 80's pickup/4Runner, may fit cruisers as well, but I dont' know that for sure.

$1 Plus shipping!!! From 96097....

2ndGenToyotaFan · 06-26-07, 11:45 PM

Next a power aentena (sp?) from a 90 4Runner, motor works great, little trim thing looks good, but the plastic push rod thing is broke off near the top, so it will go up, but doesn't get pulled down....... Any takers?

Heck, I'll let this go for shipping!

96097

2ndGenToyotaFan · 06-26-07, 11:45 PM

Coin holder things, that fit factory punch outs for lots of 80's and 90's Toyotas, the top 2 are black, the lower one is grey. $1 + shipping from 96097

2ndGenToyotaFan · 06-26-07, 11:52 PM

Gauge set out of an 89 4Runner, all worked fine when removed. Will fit 84-88 trucks, and 84-89 4Runners, mounting tabs are in good shape. I think I have the oil sender for this as well, I'll try to find it if anyone wants it, all the bulbs that were in it, still are. That's about $20 worth of bulbs!!! $1 and shipping 96097

2ndGenToyotaFan · 06-26-07, 11:55 PM

Heater fan switch..... I think it's for the 84-88/9 vintage trucks and 4Runner, it is the 4 speed switch, I'll make sure it works before I send it off to anyone. $1 + shipping 96097

2ndGenToyotaFan · 06-26-07, 11:58 PM

Some non Toyota parts, I had these in my old pickup, they really get your point across if you are angry

They are Chevy I think..... Oh, they are horns.....

$1 plus shipping 96097

Thanks for looking

Horns are sold

projektdotnet · 06-27-07, 01:40 AM

What's the shipping cost for those horns? zip: 84041 (wife gets paid thurs)

Spud · 06-27-07, 02:21 AM

I could really use those tow strap loops...

PM'ed you.

Poser · 06-27-07, 07:07 PM

Quote:

Originally Posted by Spud

I could really use those tow strap loops...

PM'ed you.

Please tell me that you are not using that for a hard point during recovery?

83bj60 · 06-27-07, 07:20 PM

Looked at the intrument panel - does it have an oil sender for a gauge, or is it for an idiot light? If it's for a gauge, I'll take it

04073

2ndGenToyotaFan · 06-27-07, 09:14 PM

Sorry,, it's the idiot light sender... I swapped in an SR5 gauge set, this is the left-overs.

Yes, Poser is right, the loops should not be used for any major recovery.

Spud · 06-28-07, 03:41 AM

Quote:

Originally Posted by Poser

Please tell me that you are not using that for a hard point during recovery?

OK, I was going to do that....But 2nd Gen clued me in that they are not good for that. Thanks to both of you for the heads up.

I'm gonna pass on the loops...(Pm'ed you back 2nd gen).

06-26-07, 11:44 PM	#1
2ndGenToyotaFan No longer pre-approved... Join Date: Jan 2006 Location: Yreka, CA TLCA# 13872 Sign Up!!! You know you want to! Posts: 3,724	I cleaned my shed... $1 plus shipping!!! Found a few things I don't need, thought maybe someone could use them. First, some tow/strap loops for the front of mid 80's pickup/4Runner, may fit cruisers as well, but I dont' know that for sure. $1 Plus shipping!!! From 96097.... Attached Images __________________ Jerod Online Toyota Parts Catalog!!! 89 4Runner "The James Caird" 01 4Runner, for my Jefferson State Cruisers Last edited by 2ndGenToyotaFan; 06-28-07 at 08:40 AM.

06-26-07, 11:45 PM	#2
2ndGenToyotaFan No longer pre-approved... Join Date: Jan 2006 Location: Yreka, CA TLCA# 13872 Sign Up!!! You know you want to! Posts: 3,724	Next a power aentena (sp?) from a 90 4Runner, motor works great, little trim thing looks good, but the plastic push rod thing is broke off near the top, so it will go up, but doesn't get pulled down....... Any takers? Heck, I'll let this go for shipping! 96097 Attached Images __________________ Jerod Online Toyota Parts Catalog!!! 89 4Runner "The James Caird" 01 4Runner, for my Jefferson State Cruisers Last edited by 2ndGenToyotaFan; 06-27-07 at 12:00 AM.

06-26-07, 11:45 PM	#3
2ndGenToyotaFan No longer pre-approved... Join Date: Jan 2006 Location: Yreka, CA TLCA# 13872 Sign Up!!! You know you want to! Posts: 3,724	Coin holder things, that fit factory punch outs for lots of 80's and 90's Toyotas, the top 2 are black, the lower one is grey. $1 + shipping from 96097 Attached Images __________________ Jerod Online Toyota Parts Catalog!!! 89 4Runner "The James Caird" 01 4Runner, for my Jefferson State Cruisers Last edited by 2ndGenToyotaFan; 06-28-07 at 08:40 AM.

06-26-07, 11:52 PM	#4
2ndGenToyotaFan No longer pre-approved... Join Date: Jan 2006 Location: Yreka, CA TLCA# 13872 Sign Up!!! You know you want to! Posts: 3,724	Gauge set out of an 89 4Runner, all worked fine when removed. Will fit 84-88 trucks, and 84-89 4Runners, mounting tabs are in good shape. I think I have the oil sender for this as well, I'll try to find it if anyone wants it, all the bulbs that were in it, still are. That's about $20 worth of bulbs!!! $1 and shipping 96097 Attached Images __________________ Jerod Online Toyota Parts Catalog!!! 89 4Runner "The James Caird" 01 4Runner, for my Jefferson State Cruisers Last edited by 2ndGenToyotaFan; 06-27-07 at 12:01 AM.

06-26-07, 11:55 PM	#5
2ndGenToyotaFan No longer pre-approved... Join Date: Jan 2006 Location: Yreka, CA TLCA# 13872 Sign Up!!! You know you want to! Posts: 3,724	Heater fan switch..... I think it's for the 84-88/9 vintage trucks and 4Runner, it is the 4 speed switch, I'll make sure it works before I send it off to anyone. $1 + shipping 96097 Attached Images __________________ Jerod Online Toyota Parts Catalog!!! 89 4Runner "The James Caird" 01 4Runner, for my Jefferson State Cruisers Last edited by 2ndGenToyotaFan; 06-27-07 at 12:02 AM.

06-26-07, 11:58 PM	#6
2ndGenToyotaFan No longer pre-approved... Join Date: Jan 2006 Location: Yreka, CA TLCA# 13872 Sign Up!!! You know you want to! Posts: 3,724	Some non Toyota parts, I had these in my old pickup, they really get your point across if you are angry They are Chevy I think..... Oh, they are horns..... $1 plus shipping 96097 Thanks for looking Horns are sold Attached Images __________________ Jerod Online Toyota Parts Catalog!!! 89 4Runner "The James Caird" 01 4Runner, for my Jefferson State Cruisers Last edited by 2ndGenToyotaFan; 06-27-07 at 06:16 PM.

06-27-07, 01:40 AM	#7
projektdotnet iCruz Join Date: Sep 2005 Location: Las Vegas Posts: 1,775	What's the shipping cost for those horns? zip: 84041 (wife gets paid thurs) __________________ "Those who would give up essential liberty to purchase a little temporary safety, deserve neither liberty nor safety." -Benjamin Franklin

06-27-07, 02:21 AM	#8
Spud the guy you ignore Join Date: Mar 2007 Location: In a van, down by the river TLCA# 8675309 Posts: 1,093	I could really use those tow strap loops... PM'ed you. __________________ Keep going, Sam "Is it being prepared to do the right thing, whatever the cost. Isn't that what makes a man?" "Sure, that and a pair of testicles." 84' 4runner (work truck) Nov / 76' FJ40 (work/fun truck) 80' Jeep J-20 Dump and Boom

06-27-07, 07:20 PM	#10
83bj60 IH8MUD Lifer Join Date: Apr 2006 Location: Laurentians North of Montreal, QC Posts: 1,389	Looked at the intrument panel - does it have an oil sender for a gauge, or is it for an idiot light? If it's for a gauge, I'll take it 04073 __________________ 91HDJ81VX (The Beast), 4B JDM, since Nov 06 83BJ60 (The Old Faithful), Still Running, Gone to a New Home 83BJ60 (Rusty but Trusty), Dec 90 - July 98, Parted Out 76FJ40 (Big Red), April 87 - July 93

06-27-07, 09:14 PM	#11
2ndGenToyotaFan No longer pre-approved... Join Date: Jan 2006 Location: Yreka, CA TLCA# 13872 Sign Up!!! You know you want to! Posts: 3,724	Sorry,, it's the idiot light sender... I swapped in an SR5 gauge set, this is the left-overs. Yes, Poser is right, the loops should not be used for any major recovery. __________________ Jerod Online Toyota Parts Catalog!!! 89 4Runner "The James Caird" 01 4Runner, for my Jefferson State Cruisers

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode