- Thread starter
- #101
Fj80 power booster and master fit with less than 1/8 inch to spare
RAZILLA fj55 build (1 Viewer)
- Thread starter 80seriespoptop
- Start date
-
- Tags
- fj55 land cruiser
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #102
ARB awning
, gypsy full size rack , LED task lights on 4 corners
- Thread starter
- #103
On board air , water bladder with pump , shower off of rack , 3 gallon air tank , lockers coming soon
Looks like you removed the factory heater blower, what are you running for a heater?
Nice job on the battery box!
Nice job on the battery box!
- Thread starter
- #105
The piglet was missing so many parts blower included so I will cross the heater bridge here in the immediate future. Any suggestions?
I know Scrapdaddy, Tuffmudder and I all have the Restomod Air Vapir II Custom Air Conditioning Systems, Scrapdaddy is the closest to having his up and running but as far as I know no one else has one running to say how they work so the jury is still out on if this will be a good fit for the 55.
Restomod: http://www.restomodair.com/shopproducts/vapir-ii-custom-air-conditioning-system/
Classic auto air sells the same system for less $$$ but lacks some features: http://www.classicautoair.com/Street_Rod_Air_Conditioning_AC_2.html
- Thread starter
- #107
Thank you this information it was very helpful
If you dig around the Slow71 and Target carrier build threads you can see how Ron and I mounted the AC/Heater unit, condenser, vent and control locations.
Good luck!
- Thread starter
- #109
Ok will get to diggin. Cheers
Like the placement of the LED lights below the rack. Well protected too.
Mind if I ask the entry point for the wire loom?? (I've thought about running over and up under the gutter thru a small 75 degree tube I weld on.
Great looking rig!
Peter
Mind if I ask the entry point for the wire loom?? (I've thought about running over and up under the gutter thru a small 75 degree tube I weld on.
Great looking rig!
Peter
- Thread starter
- #111
Wire goes up through the rubber holding the quarter panel window inthe very top upright corner. Thanks for the compliment
Ah jeesh now I see it in your pic. Nice clean run. I have my pile of lights-wire and relays ready to go... But it's a few more items down on the list.
Thanks much for the reply
Thanks much for the reply
- Thread starter
- #113
If you live close by in or near San Diego Ca Drop in and I will help with your wiring schema this is what I do
Great looking camp vehicle! I'm up in Ventura and down in SD a bit. I'll hola when I'm around. I am wondering why you replaced with the 80 brake booster and master? Did yours fail or is it better somehow? I have read that is what people are using.
- Thread starter
- #115
The fj80 pushes more brake fluid volumn and is set up just right for your new disk brakes
So you are trying to sell this pig?
- Thread starter
- #117
Haha.....when a boar mama delivers pigelets you raise em up and take em to market ..to answer your question I have considered it and with the right offer it could be yours
- Thread starter
- #119
Well the cat is out of the bag
I thought it was out of the bag when you had Razilla posted on Craigslist a while ago
