 | |
10-28-09, 03:26 PM
|
#1 (permalink)
| | Site Addict
Join Date: Apr 2003 Location: NE PA coal region
Posts: 1,168
| Parting 97 FJ80 in northeast PA ++++++++++I bought Rich Adams wrecked 97 FJ80, he put it on its side on a ramp on the Jersey turnpike back in August. lots of good stuff- the truck runs very well, as good as my never wrecked 95 to be sure. Ask for anything not listed- I will sell anything on the truck, it needs to be stripped and sent to its final storage place. Mileage is 183K engine and it runs quite well. I am keeping the suspension and tires/wheels for my 95. Rich- the suspension and tires/wheels will be put to good use here in PA- thanks!!!! Here goes:
Engine- complete with wiring harness, power steering pump, starter, cooling fan, AC compressor, belts, all that jazz. Fuel injection system untouched- since it comes with the wiring harness not removed it's pretty much a plug and play. Rich has an engine analysis sample from the truck that is quite good. The engine starts readily and sounds great. No bad smoke or noises. I didn't butcher anything, either during the removal- no wires cut, carefully removed the four nuts from the exhaust pipes (studs still perfect and nuts threaded back onto them). When I pulled the transmission there was no oil leaking from the rear main seal, and the oil pan is completely dry. No leaks anywhere, oil or coolant. The engine control wiring harness is complete and uncut in any way. This is a very good engine for $500.
Transmission/transfer case, complete with transfer case shifter, transmission shifter, transfer case boot, the plate that bolts to the floor inside the truck with all the switches that go to the shifters, and the wiring harness. Torque converter is included as is the complete dipstick tube and dipstick. The output shafts on the transfer case are tight no play at all. Transmission and transfer work great in all gears. $300
Front driveshaft $50 Tan padded console lid $30 Power steering cooler tube assembly $40
Instrument cluster $25 Set of five stock 16" alloy wheels from my 95 FJ80 with tires $125 the set
The sheet metal on the driver side is very nice didn't see any damage there. Doors $50 each front fender with flare $60. Color is a nice dark red (maroonish). Ask for anything else in particular. Everything on the passenger side is damaged as is the roof and hood at the front passenger corner. I will attach a photo of the driver side of the truck to show how nice this sheet metal is. I also have the radiator support very nice $40, radiator $50, AC condenser $40.
I can palletize the engine, or other big parts and get to either FEDEX Freight or Roadway/Yellow Freight terminals for $100 per trip (it's a 50 mile drive for me one way) if the buyer makes the shipping arangements. I've done this several times and it works fine. I will not sell anything big that has to be boxed- seats for example- too much trouble. I'm in northeast PA not far from Rausch Creek offroad park. best way to reach me is Mud private message or email shmukter@pa.metrocast.net. Thanks, Gary S
__________________ 78 FJ55
85 BJ70
86 FJ60
95 FJ80
Last edited by shmukster; 11-09-09 at 12:50 PM.
|
| |
10-28-09, 04:23 PM
|
#2 (permalink)
| | 250+ Club
Join Date: Nov 2005 Location: Boston MA
Posts: 272
| Looking for a set of center cap, rear mud guard & gear consolo in oak color, as long as all four clip in the back, that holds the leahter shifter are there, I am interested. Btw, if you can reply with picture of the parts, it will be super helpful. What would the S&H be to zip code 02167. Thanks. milesng@hotmail.com |
| |
10-28-09, 06:48 PM
|
#3 (permalink)
| | Forum Regular
Join Date: Dec 2007
Posts: 15
| Looking for rear brake calipers, front too if available. Shipping to 44703.
email me at rtson1@sbcglobal.net Thanks |
| |
10-28-09, 10:25 PM
|
#4 (permalink)
| | Forum Regular
Join Date: May 2009
Posts: 84
| Need 1 front ABS speed sensor. Please let me know.
Thanks, jt |
| |
10-29-09, 02:02 AM
|
#5 (permalink)
| | Site Addict
Join Date: Apr 2003 Location: NE PA coal region
Posts: 1,168
| axle parts Guys- the rotors and ABS sensors are gonna be sold with the axles. The axles will be complete from rotor to rotor. Gary
__________________ 78 FJ55
85 BJ70
86 FJ60
95 FJ80 |
| |
10-29-09, 05:51 AM
|
#6 (permalink)
| | Forum Regular
Join Date: Sep 2009
Posts: 61
| I need the ebrake handle and the "2nd" button (think it's one piece with the "pwr" button. I'll take the steering wheel too if it's in good shape. |
| |
10-29-09, 05:53 AM
|
#7 (permalink)
| | Forum Regular
Join Date: Sep 2009
Posts: 61
| Oh and if it had the CDL switch in it I'll take that too. Shipping to 30228. |
| |
10-29-09, 09:07 AM
|
#8 (permalink)
| | 250+ Club
Join Date: Aug 2005 Location: Clarkston, MI (Detroit)
Posts: 267
| LH Tail Light Hey,
If the LH Tail Light isn't cracked, and the tabs are intact.
Ship to 48327.
Thanks!
__________________ Larry Brohman
1997 LX450
Semi-Stock: Revo's, HIRs, FIAMMs, George's LEDs, Scion tC Inside Rear View Mirror, Baselined with Mobil Synths, CDL Switch/Pin 7 Mod, Not Locked. Scan-Gauge 232k miles |
| |
10-29-09, 12:34 PM
|
#9 (permalink)
| | 250+ Club
Join Date: Oct 2009
Posts: 325
| What about condition/price of, exhaust, front seats, tail lights? Can I get some pictures out the ARB front bumper. Whats your zip so I can tell how far you are from me (14883). |
| |
10-29-09, 07:34 PM
|
#10 (permalink)
| | 250+ Club
Join Date: Oct 2008 Location: Charleston, SC
Posts: 593
| I need a tan dome light. Do you have one available?
__________________ 1996 FZJ80, Elec. Lockers, Center Diff Button, OME 850/863 2.5", 285 Goodyear Duratracs, ARB, Warn 9k, Slee Rear Bumper w/ Tire carrier, LightForce 240's, George's LEDs, Aux. Fan wired w/ stock fuse box/CDS relay, Scion HU, Aussie Sub Tank, Dual Batt & York OBA. |
| |
10-29-09, 08:25 PM
|
#11 (permalink)
| | Supporting Vendor
Join Date: Dec 2005 Location: Fredericksburg, VA
Posts: 711
| I'll be out that way in a couple weeks, what color and condition are the front seats in? I'd drive & pick them up... |
| |
10-30-09, 10:27 AM
|
#12 (permalink)
| | Forum Regular
Join Date: Feb 2006 Location: Leadville, CO
Posts: 195
| emailed you on the motor
__________________ 78fj40,74fj40,97lx450,64vwbus,78westy, 88SPG & 50 chevy 5window |
| |
10-30-09, 02:49 PM
|
#13 (permalink)
| | case quarter
Join Date: Jul 2004 Location: Reaching Around
Posts: 3,560
| Yo! send me pics of the bumper... if it's cool I'll have you ship it...
ericnhagan and then yahoo and then .com
__________________ Eric Hagan - Auburn, AL
94 - air locked up like two dogs
"I Live Stuck" - click me |
| |
10-30-09, 06:30 PM
|
#14 (permalink)
| | Forum Lifer
Join Date: Oct 2004 Location: Stafford, VA
Posts: 2,539
| Stock rear bumper or custom?
__________________ No problem, I'll just tow the pig to Salt Lake on a UHAUL trailer......
95 T100, beater edition (vacationing in Idaho)
97 Land Cruiser, Collectors Edition
01 Sequoia Limited
02 Camry, Commuter Chariot Extraordinaire
"A vehicle's capabilities are inseparably linked to the mental instability of the driver" |
| |
10-31-09, 05:46 AM
|
#15 (permalink)
| | Site Addict
Join Date: Apr 2003 Location: NE PA coal region
Posts: 1,168
| 80 parts update Looks like the ARB front bumper is spoken for. I have names of everyone who expressed interest in the event the potential new owner backs out. The rear bumper is not available. The dome lights had been removed prior to my taking delivery of the truck so they are of course not available. I believe I have responded by either email or Mud message to everyone making an inquiry through either (in some cases both) of those venues. Gary S
__________________ 78 FJ55
85 BJ70
86 FJ60
95 FJ80
Last edited by shmukster; 11-01-09 at 04:00 PM.
|
| |
10-31-09, 06:37 AM
|
#16 (permalink)
| | 250+ Club
Join Date: Oct 2009
Posts: 325
| I've still been waiting for pictures of the seats, front bumper and if you had tail lights. |
| |
10-31-09, 10:49 AM
|
#17 (permalink)
| | Forum Regular
Join Date: May 2006 Location: Where the glaciers stopped.
Posts: 220
| PM Sent you a PM about the Axles.
__________________ Overlander 80 - No Brush Marks
'97/80 ~4" lift - Bull Bar w/Warn - 35" MUDS - Sliders - Ext. Diff Breathers - Bulletproof PHH - 20# Co2 built into tool box - Rerouted Exhaust/Hi-Flow Cats - Flareless/Line X'ed - Rear/Spare/Hilift Unit (7 year W.I.P.) |
| |
11-01-09, 04:21 PM
|
#18 (permalink)
| | Forum Regular
Join Date: Nov 2006 Location: Laureldale PA
Posts: 68
| sent you a pm |
| |
11-02-09, 12:48 PM
|
#19 (permalink)
| | Forum Regular
Join Date: May 2009 Location: Northfield, New Jersey 08225
Posts: 49
| what is the status of the front seats and how much for the drivers side front left fender |
| |
11-02-09, 12:50 PM
|
#20 (permalink)
| | Forum Regular
Join Date: May 2009 Location: Northfield, New Jersey 08225
Posts: 49
| i live in jersey and will take the engine if still available. pm me if you get time. ty |
| |  | | | Thread Tools | | | | Display Modes | Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | | | |