Parting Out 1979 FJ40 Colorado

boulder76 · 07-06-08, 11:13 AM

I am parting out a 1979 FJ40 located in Fort Collins, CO The tub is in pretty bad shape. The Hard top, front doors and seats are sold. Most of the drive train is still there. I can ship most of the small parts but local pick up would be required for the bigger stuff. Contact me with what you need and give me your address for delivery information so that I can send you a price shipped.

Thank you

Texx · 07-06-08, 05:42 PM

I need factory rear floor mat, if in good condition, thx Texx

boulder76 · 07-06-08, 09:11 PM

I have it but will have to pull it out and see if it is in good shape. I will get back to you.

wussyPup · 07-07-08, 12:19 AM

Do you have the rear license plate holder in good condition?
Thanks, -Steve

Flinny · 07-07-08, 05:22 AM

I need the front oem mat. Let me know. I am in NC 27705

boulder76 · 07-07-08, 06:42 AM

The plate holder is gone. Sorry

fjwagon · 07-07-08, 09:45 AM

How bad is the rear tub near the amby doors? I need a section of the bed.

boulder76 · 07-07-08, 10:58 AM

It is in pretty bad shape. The sil under the doors is complteley gone. Send me your e-mail and I can send you a pic.

Texx · 07-07-08, 12:13 PM

Quote:

Originally Posted by boulder76

I have it but will have to pull it out and see if it is in good shape. I will get back to you.

Thanks, I'm sure I need other parts too, but need to get a little further along on my 1980.

Toyrod · 07-07-08, 12:47 PM

Front and rear axles, engine, 4 speed bell housing, front driveline. This would go with the 4speed trans/transfer that I picked up from you earlier for an FJ45 project.

boulder76 · 07-07-08, 02:00 PM

Hey, I lost your contact info or I would have e-mailed you about these items. I am going to send you a pm with mine.

Thank you

boulder76 · 07-09-08, 10:14 AM

Sorry guys I coulnd't find any of the mat left. It must have been in bad shape.

Sorry.

riberware · 07-10-08, 04:44 PM

I need:
1 rear ambulance door window glass with it's rubber gasket
2 front turn signals(both sides)

Hard top flip out hardware this includes hinges, locks, bolts, seals, and the gaskets for both glasses...

Picture from the EPC

http://img70.imageshack.us/img70/178...ardwareqp4.jpg

Do you have anything of the parts listed???

ol'skul · 07-10-08, 05:17 PM

Is the steering Shaft bent? Shipping to Sunny Florida 34475

boulder76 · 07-11-08, 07:11 AM

PM's have been sent.

77cruiser77 · 07-12-08, 04:30 AM

What about the Hazard pull knob/switch?

boulder76 · 07-12-08, 11:41 AM

I am sorry to say but I have that item on ebay right now. Just wasn't getting rid of the stuff fast enough.

boulder76 · 07-14-08, 06:36 AM

I am getting ready to pull the tub and cowl off and take it to the scrap yard. There are a few good pieces left on the tub and cowl. Any one is welcome to come and cut them out. Just PM me.

boulder76 · 07-14-08, 08:35 AM

Thanks, that may help out a lot. I still have a lot of the 79 left and it needs to go.

BreckenridgeCruiser · 07-16-08, 01:18 AM

How much for what's left? I have a project soming up and could use some steela nd bunch of switches and stuff.

I'm local too!

Kraig

boulder76 · 07-16-08, 07:31 AM

I sent you a PM. Let's talk.

rlong · 07-18-08, 01:12 AM

Do you have a good windsheild frame? wiper mechanism?

Bob in Ft Collins

PScottBx · 07-18-08, 07:22 PM

?Alternator bracket????

Thanks

scott

boulder76 · 07-20-08, 01:47 PM

Quote:

Originally Posted by rlong

Do you have a good windsheild frame? wiper mechanism?

Bob in Ft Collins

Yep, I have a good one. Send me a PM or give me a call.

boulder76 · 07-20-08, 01:48 PM

Sorry the bracket is gone.

boulder76 · 07-20-08, 01:50 PM

I am down to most of the big stuff. I have the 79 Frame with Axles left and a lift on it and the engine. $500

weekndwarrior · 07-20-08, 05:13 PM

I am looking for parts of the headlight assembly????? Got it?

boulder76 · 07-20-08, 06:06 PM

I probably do have some of the parts from the assembly. PM me with what you need.

Thank you

SLOonTheGo · 07-20-08, 07:45 PM

Do you still have the locking hubs from the front end?

boulder76 · 07-21-08, 07:53 PM

Actually this model didn't have the hubs. Just pull the lever and go.

07-06-08, 11:13 AM	#1
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	Parting Out 1979 FJ40 Colorado I am parting out a 1979 FJ40 located in Fort Collins, CO The tub is in pretty bad shape. The Hard top, front doors and seats are sold. Most of the drive train is still there. I can ship most of the small parts but local pick up would be required for the bigger stuff. Contact me with what you need and give me your address for delivery information so that I can send you a price shipped. Thank you

07-06-08, 05:42 PM	#2
Texx IH8MUD Lifer Join Date: Feb 2002 Posts: 1,962	I need factory rear floor mat, if in good condition, thx Texx __________________ world's cleanest 89 FJ-62, and a few parts... 85 xcab hilux 4x4 resto'ed, 67 XKE, 1500 Vulcan, 80 Fj40 restored 03 Tacoma TRD SR5, Suzuki DR350 ANYBODY BUT OBAMA!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

07-06-08, 09:11 PM	#3
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	Floor Mat I have it but will have to pull it out and see if it is in good shape. I will get back to you.

07-07-08, 12:19 AM	#4
wussyPup just another VI Cruiser Join Date: Apr 2005 Location: Langford, British Columbia, Canada TLCA# 15565 Posts: 684	Do you have the rear license plate holder in good condition? Thanks, -Steve __________________ '90 HDJ81 for sale soon: '90 Trooper past: '76 FJ55 - more rust than steel; still miss it

07-07-08, 05:22 AM	#5
Flinny IH8MUD Regular Join Date: Jul 2007 Location: Durham NC Posts: 309	I need the front oem mat. Let me know. I am in NC 27705 __________________ Maria 1999 TLC - 2" lift - 305-75/16 1997 Toyota Tacoma DD

07-07-08, 06:42 AM	#6
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	License plate holder The plate holder is gone. Sorry

07-07-08, 09:45 AM	#7
fjwagon IH8MUD Lifer Join Date: Dec 2004 Location: Texas TLCA# 12463 Posts: 1,484	How bad is the rear tub near the amby doors? I need a section of the bed.

07-07-08, 10:58 AM	#8
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	Tub It is in pretty bad shape. The sil under the doors is complteley gone. Send me your e-mail and I can send you a pic.

07-07-08, 12:47 PM	#10
Toyrod IH8MUD Regular Join Date: Oct 2006 Location: Sheridan, WY TLCA# 13298 Posts: 355	Front and rear axles, engine, 4 speed bell housing, front driveline. This would go with the 4speed trans/transfer that I picked up from you earlier for an FJ45 project. __________________ 69 FJ40 Project, SOA, 35 MTRs, Shackle Reversal, 2F, FJ60 disc brakes, 4 speed, and split transfer 87 FJ60 Daily Driver, Stock, for now..... 99 UZJ100 Wifes Daily Driver, Locker, Slee/OME 2 lift, 285/75 Bridgestone Revo's 65 FJ45LPB 67 FJ45LPB

07-07-08, 02:00 PM	#11
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	Parts Hey, I lost your contact info or I would have e-mailed you about these items. I am going to send you a pm with mine. Thank you

07-09-08, 10:14 AM	#12
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	mats Sorry guys I coulnd't find any of the mat left. It must have been in bad shape. Sorry.

07-10-08, 04:44 PM	#13
riberware IH8MUD Junior Join Date: Dec 2007 Location: PANAMA Posts: 82	I need: 1 rear ambulance door window glass with it's rubber gasket 2 front turn signals(both sides) Hard top flip out hardware this includes hinges, locks, bolts, seals, and the gaskets for both glasses... Picture from the EPC http://img70.imageshack.us/img70/178...ardwareqp4.jpg Do you have anything of the parts listed??? __________________ *http://www.youtube.com/riberware* *'98 Toyota HDJ-80* *Stock with CDL switch, deleted VC, Dual pillar gauge mod boost+pyro, 17" bling wheels...* *'91 Suzuki SE-416* *33" Boggers, Calmini 3"+3" lift, RockMonster Low Gears, Lock-Right Lockers, Safari Snorkel, Warn winch, MSD stuff, etc*

07-10-08, 05:17 PM	#14
ol'skul IH8MUD Rookie Join Date: Feb 2007 Posts: 25	Steering Shaft? Is the steering Shaft bent? Shipping to Sunny Florida 34475

07-11-08, 07:11 AM	#15
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	Parts PM's have been sent.

07-12-08, 04:30 AM	#16
77cruiser77 IH8MUD Rookie Join Date: Oct 2007 Posts: 23	What about the Hazard pull knob/switch?

07-18-08, 07:22 PM	#23
PScottBx IH8Mud4Life Join Date: Mar 2006 Location: LA...the muddy LA...no movie stars here TLCA# 16251 Posts: 3,955	?Alternator bracket???? Thanks scott __________________ 1982 FJ45 Troop Carrier "Matilda" - - 1996 LX450 "80 in drag" *Bayou State Land Cruiser Association* - www.BSLCA.com - Good friends, a few cruisers, alot of laughs and a bunch of wives making this face --> "If I'm off (which is rare)... I'm in!"

07-12-08, 11:41 AM	#17
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	Hazard Pull Knob I am sorry to say but I have that item on ebay right now. Just wasn't getting rid of the stuff fast enough.

07-14-08, 06:36 AM	#18
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	79FJ40 Tub I am getting ready to pull the tub and cowl off and take it to the scrap yard. There are a few good pieces left on the tub and cowl. Any one is welcome to come and cut them out. Just PM me.

07-14-08, 08:35 AM	#19
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	Denver to Atlanta Thanks, that may help out a lot. I still have a lot of the 79 left and it needs to go.

07-16-08, 01:18 AM	#20
BreckenridgeCruiser IH8MUD Regular Join Date: Aug 2006 Location: Breckenridge, Colorado Posts: 359	How much for what's left? I have a project soming up and could use some steela nd bunch of switches and stuff. I'm local too! Kraig __________________ 1981 JDM BJ44 RHD - Going under the knife soon!

07-16-08, 07:31 AM	#21
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	Parts that are left. I sent you a PM. Let's talk.

07-18-08, 01:12 AM	#22
rlong IH8MUD Rookie Join Date: May 2003 Posts: 9	Windsheild Frame Do you have a good windsheild frame? wiper mechanism? Bob in Ft Collins

07-20-08, 01:48 PM	#25
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	Bracket Sorry the bracket is gone.

07-20-08, 01:50 PM	#26
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	Rolling Frame and Engine I am down to most of the big stuff. I have the 79 Frame with Axles left and a lift on it and the engine. $500

07-20-08, 05:13 PM	#27
weekndwarrior IH8MUD Rookie Join Date: Jul 2008 Posts: 1	I am looking for parts of the headlight assembly????? Got it?

07-20-08, 06:06 PM	#28
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	Head Light I probably do have some of the parts from the assembly. PM me with what you need. Thank you

07-20-08, 07:45 PM	#29
SLOonTheGo IH8MUD Junior Join Date: Nov 2006 Location: San Luis Obispo, Ca Posts: 164	Do you still have the locking hubs from the front end? __________________ 1974 FJ40 Penelope, beat up stocker, FJ60 knuckles. 2001 Silverado step side 2008 Giant Trance X2 2005 Specialized Hardrock Sport

07-21-08, 07:53 PM	#30
boulder76 IH8MUD Regular Join Date: Mar 2006 Location: Fort Collins, CO TLCA# 15172 Posts: 296	Hubs Actually this model didn't have the hubs. Just pull the lever and go.