[RIDDLER]

I am parting a complete 1983 FJ60 in Spokane, WA. Truck is complete and not rusted out. Parts prices are set at 50% of what www.cruiserparts.net charges plus shipping of course for items commonly sold. Truck has clean front and rear end. Clean rear hatch upper and lower. Clean hood, grill, and front clip. Stock interior. (if you are wondering I bought it for the original engine)

Please post, PM, or email questions at riddlespokane@comcast.net

thanks

Aaron

[Mikesta]

Originally Posted by RIDDLER

I am parting a complete 1983 FJ60 in Spokane, WA. Truck is complete and not rusted out. Parts prices are set at 50% of what www.cruiserparts.net charges plus shipping of course for items commonly sold. Truck has clean front and rear end. Clean rear hatch upper and lower. Clean hood, grill, and front clip. Stock interior. (if you are wondering I bought it for the original engine)

Please post, PM, or email questions at riddlespokane@comcast.net

thanks

Aaron

Hi Riddler, I need the whole thing.

[mac]

I see a diesel in your future...

[In2cruisers]

lower gate............no rust? Color?

[RIDDLER]

lower gate has two spots of rust but fixable. straight otherwise. Light blue. original paint confirmed no bondo.

thanks

Aaron

[CaliCruiser]

pm sent

[Buffalo]

Is this WA as in Washington, US..?

Cheers ~PHIL

[1phrogguy]

Front CV driveshaft, to 28540. 50.00 plus the ride.

[OnTheSpot]

So are you keeping the motor for yourself? If not I need so brackets and stuff off the motor.

[RIDDLER]

Yes the FJ60 is in WA state, Eastern Washington to be exact.

OnTheSpot "So are you keeping the motor for yourself? If not I need so brackets and stuff off the motor" Email me please with specific needs. I was going to use the engine for a core rebuild on a factory restoration that I am doing, but all of the accessories are available.

1phrogguy "Front CV driveshaft, to 28540. 50.00 plus the ride." Sounds fine but it is about 18C at my house and the truck it outside. Are you in a hurry? If not email me direct and I will remove it when I can roll the truck into my shop.

thanks

Aaron

[Tinker]

How 'bout the pigltail the lighter plugs into? I need one with at least 2" of wire left on it.

[yellowstoner]

Do you have the PS pump & bracket? Do you know if they will they bolt onto a '78 2F motor?

[Cruzerman]

Front valance?

[RIDDLER]

Replies here:

Front valance? Yes I think I know this part. Please email me a photo of yours so I get it right.

PS pump and bracket: yes I have it, you were first to ask for this $75. Fit a 78' 2F maybe with a mini PS conversion but I don't know. Please check the tech thread for FJ40 and the search function. If you don't want it please tell me soon as there is another that wants it.

How 'bout the pigltail the lighter plugs into? I need one with at least 2" of wire left on it.: I am sure it is there. Email me and I can reply with a photo.

thanks

Aaron

[redandtootall]

I could use a couple vacuum parts off the engine if your not planning on keeping those. first, their is a white canisiter about the size of the fuel filter that mounts under the passenger side of the air cleaner housing. It has four vacuum hoses that connect to it. Second there are two thermal vacuum switches that mount under the thermistate housing. They have two vacuum hoses leading to each of them. Although they look simular thay are different and I need the lower switch. Finnally, there is a canister that mounts next to the washer fluid resiviour for the front headlights on the passenger side. It has four small vacuum hoses that are on top and one large vacuum hose on the bottom. It also contains a small filter inside. I need that. I could also use the motor for the manifold cooling fan if yours in fact still works. I also need the interior switch that controls the heater fan that is located under the passenger seat.
Thanks

[fj401975]

Do you have the drivers front door window regulator if in good shape and not slipping?

Chris

[RIDDLER]

1) Do you have the drivers front door window regulator if in good shape and not slipping? yes I have it, it does not slip. I may be selling the doors complete so I am not going to part them yet.

2) Tinker How 'bout the pigltail the lighter plugs into? I need one with at least 2" of wire left on it. yes I have it. PM me.

All replies and photos have been sent.

thanks

Aaron (riddlespokane@comcast.net)

[Phishingroovin]

Do you have the passenger side headlight window, and a passenger turn signal assembly? $30 plus shipping to 59715?
Thanks

[RIDDLER]

I could use a couple vacuum parts off the engine if your not planning on keeping those. first, their is a white canisiter about the size of the fuel filter that mounts under the passenger side of the air cleaner housing. It has four vacuum hoses that connect to it. Second there are two thermal vacuum switches that mount under the thermistate housing. They have two vacuum hoses leading to each of them. Although they look simular thay are different and I need the lower switch. Finnally, there is a canister that mounts next to the washer fluid resiviour for the front headlights on the passenger side. It has four small vacuum hoses that are on top and one large vacuum hose on the bottom. It also contains a small filter inside. I need that. I could also use the motor for the manifold cooling fan if yours in fact still works. I also need the interior switch that controls the heater fan that is located under the passenger seat.
Thanks

Do you have the passenger side headlight window, and a passenger turn signal assembly? $30 plus shipping to 59715? yes I do. Sounds far to me. Email me direct for photos and the specifics. riddlespokane@comcast.net

Thanks

Aaron

[RredFJ40]

The P/S gear box and hoses in good shape (not leaking or sloppy)? How much shipped to 97601? Thanks.