'73 fj40 parts

Fast Eddy · 12-22-06, 05:47 PM

Drop hitch that bolts on rear cross member. I have two. $15 with 2" ball.
Two original Dunlop Sno Cruiser tires - $25 each
Great Center Arm with mounting hw - $40

'73 fj40 parts
Cowl vent doors, super nice, with springs, pins and nice gaskets $25 pair
Heater box from under dash, - $40
Great Bezel (black) - $40
Rear seat belts, weathered, but working - $25
One good rim for drum brakes only - $20
Three hubcaps, not great, 2 rear, 1 front - $20 all

Later model '75-'78 style driver's side door glass. - $25.
Four speed and matching t-case; apart and missing two bushings - $100
2f motor in bad shape, rusted, cracked crank, rods are probably good - free
2f crank, looks great, clean and from another engine - $100
2f oil pan - $50
2f head needs machining - $50
2f water pump and plastic fan with clutch - $90
Hard Top vent glass, one side has some scratches - $20
Tail light lenses in ok shape - $20 pair

While you're here, I'm looking for and may trade for these '75-'78 parts:

ambulance door strikers
rubber t-case boots (front output and shifter)
Aisin mini-truck style hubs
leaf spring shackles and pins
dual diaphram brake booster
one good original seat bottom cover
perfect bib and windshield frame

All prices obo plus a box plus shipping from 95125. Clean parts are extra.

KT40 · 12-22-06, 06:08 PM

Do you have a clean title?

Fast Eddy · 12-22-06, 06:09 PM

Quote:

Originally Posted by KT40

Do you have a clean title?

Nope, sorry.

Degnol · 12-22-06, 06:21 PM

If you have the "Front Fan" and "Rear Fan" switched with knobs, I'm in.

I'll take the bezel, too.

Ed 64114

Fast Eddy · 12-22-06, 06:23 PM

Quote:

Originally Posted by Degnol

If you have the "Front Fan" and "Rear Fan" switched with knobs, I'm in.

It doesn't have a rear heater. It might have at one point. I'll have to look again, but I won't get back out there until Tuesday. They're yours if I've got 'em. I'll take some pics then too.

Quote:

Originally Posted by Degnol

I'll take the bezel too.

It's upside down. Is that ok?

rsc71 · 12-23-06, 09:29 AM

I was interested in the windshield hooks and bumpers.I have a 68 and I think I am looking for the taller bumpers?

Fast Eddy · 12-23-06, 11:30 AM

Quote:

Originally Posted by rsc71

I was interested in the windshield hooks and bumpers.I have a 68 and I think I am looking for the taller bumpers?

You mean bumperettes from the back? I've got one. I'll post a pic Tuesday or so.

rsc71 · 12-23-06, 03:40 PM

meant the rubber bumpers the windshield sits on.I have seen several different styles and the ones i have currently let the wiper arms hit the hood.looking for the ones that have a step in them and are a little taller.

Fast Eddy · 12-24-06, 03:43 PM

Quote:

Originally Posted by rsc71

meant the rubber bumpers the windshield sits on.I have seen several different styles and the ones i have currently let the wiper arms hit the hood.looking for the ones that have a step in them and are a little taller.

Those are the ones I have.

clemson55 · 12-24-06, 04:35 PM

T-case shifter boots? If so shoot me a pm with price. Thanks

landcrusiergod1 · 12-25-06, 06:34 AM

Do you have any front turn signals? Thanks Merry Christmas

65swb45 · 12-25-06, 11:11 PM

Ed, I'd be interested in the carb core and the wiper motor. LMK

x3inchesx · 12-26-06, 12:21 PM

Do you have the door latches? The part on the tub that holds the door closed.

Fast Eddy · 12-26-06, 12:31 PM

Quote:

Originally Posted by x3inchesx

Do you have the door latches? The part on the tub that holds the door closed.

I'll look today. Maybe.

Fast Eddy · 12-26-06, 12:34 PM

Quote:

Originally Posted by landcrusiergod1

Do you have any front turn signals? Thanks Merry Christmas

They're there, but well trashed. You wouldn't want them.

Fast Eddy · 12-26-06, 12:35 PM

Quote:

Originally Posted by clemson55

T-case shifter boots? If so shoot me a pm with price. Thanks

Crumbly and torn. Not worth removing. Sorry.

Fast Eddy · 12-26-06, 06:55 PM

Spare tire mount - $100
Hood Hinges - $40
Vent Grill - $20
Door parts, tell me what you need and we'll work out a price. No glass. The metal itself is not even good enough for a 1/2 door.

Fast Eddy · 12-26-06, 06:58 PM

$20 with all the hardware; both sides. One rear top bracket is very slightly bent.

What's the big nut in the top picture for? I didn't see it at SOR. [edit] It's the mount point for factory door safety straps.

cruiserbrett · 12-26-06, 07:44 PM

I am interested in the soft top hardware. the big nut is for the early door saftey straps, used when the doors are off.

Also interested in the carb too.

Fast Eddy · 12-26-06, 08:52 PM

Quote:

Originally Posted by cruiserbrett

I am interested in the soft top hardware. the big nut is for the early door saftey straps, used when the doors are off.

Also interested in the carb too.

2nd in line for both.

Fast Eddy · 12-26-06, 09:17 PM

Heater Box

65swb45 · 12-26-06, 10:43 PM

Ed, I didn't realize the doors you had were for a later model. I've got an ad up in the wanted section for the guts of the door, lock mechanisms, latches, window regulator etc. If you've got both sides,we might be able to work something out on that too.

You can ship the carb by itself. Less chance of damage that way.

KT40 · 12-26-06, 11:14 PM

PM'd you about the hood hinges

Fast Eddy · 12-26-06, 11:25 PM

I thought you got the parts you needed for the late model doors.

I've got driver's side glass and both sides window regs and window handles (from my future 1/2 doors), and the inside and outside latch mechanism and handles from this door. This right-side door panel could be yours too.

Both my passenger's side doors have been rolled upon, so no glass. I don't know if that's statistically significant or not.

12-22-06, 06:21 PM	#4
Degnol Noaccount Webwheeler Join Date: Jan 2003 Location: Kansastitty TLCA# 14529 Posts: 6,143	If you have the "Front Fan" and "Rear Fan" switched with knobs, I'm in. I'll take the bezel, too. Ed 64114 __________________ There is nothing so depraved as a man in the depths of an ether binge '66FJ40, Fresh 2F, H42/Orion(By Poser...LCR4WD), ARB Front/rear(By Poser...LCR4WD), MetalTech Cage installed by Poser, Screw-ups fixed(by Poser) 4WDB Corvette Master, Mini Truck PS, 3.5" Lift, Warn 8274, 33s on stockers

12-24-06, 04:35 PM	#10
clemson55 IH8MUD Lifer Join Date: Jun 2004 Location: Clemson, SC Posts: 3,307	T-case shifter boots? If so shoot me a pm with price. Thanks __________________ Cruiserless for the first time in 4+ yrs Upstate Cruisers

12-25-06, 11:11 PM	#12
65swb45 elder statesman Join Date: Apr 2004 TLCA# 1086 Posts: 6,124	Ed, I'd be interested in the carb core and the wiper motor. LMK __________________ A carbureted man in a fuel injected world. 65SWB45, 64LWB45, 68FJ40, 76HJ45,84FJ60, 76K5, 73Sub454, 89Sub7.4[gone], 97Sub5.7 TLCA delegate, Trail Crew-LAC TLCA, The White Trash of the Elwood Chapter my website: http://www.marksoffroad.net

12-26-06, 12:21 PM	#13
x3inchesx IH8MUD Rookie Join Date: Mar 2004 Location: Oak Lawn, IL TLCA# 15162 Posts: 61	Do you have the door latches? The part on the tub that holds the door closed. __________________ '97 FZJ80 White Goodyear MT/R 285/75R16, Surco Roof Rack, Hella driving lights, Kaymar spare tire carrier, Optima yellow top, CDL switch, Custom Sliders, OME Heavy Suspension, ARB Front Bumper, Safari Snorkel '77 FJ40 White Futura Enforcer MT 245/75R16

12-26-06, 07:44 PM	#19
cruiserbrett IH8MUD Lifer Join Date: Feb 2002 Location: San Diego Posts: 1,121	I am interested in the soft top hardware. the big nut is for the early door saftey straps, used when the doors are off. Also interested in the carb too. __________________ Brett Lotsa cruisers and little time.

12-22-06, 06:08 PM	#2
KT40 IH8MUD Junior Join Date: Jul 2005 Location: Redwood City,CA TLCA# 13481 Posts: 83	Do you have a clean title?

12-23-06, 09:29 AM	#6
rsc71 IH8MUD Regular Join Date: Apr 2006 Location: NorCal TLCA# 17752 Posts: 270	I was interested in the windshield hooks and bumpers.I have a 68 and I think I am looking for the taller bumpers?

12-23-06, 03:40 PM	#8
rsc71 IH8MUD Regular Join Date: Apr 2006 Location: NorCal TLCA# 17752 Posts: 270	meant the rubber bumpers the windshield sits on.I have seen several different styles and the ones i have currently let the wiper arms hit the hood.looking for the ones that have a step in them and are a little taller.

12-25-06, 06:34 AM	#11
landcrusiergod1 IH8MUD Junior Join Date: Nov 2004 Location: fl -crestview TLCA# 12323 Posts: 112	Do you have any front turn signals? Thanks Merry Christmas

12-26-06, 10:43 PM	#22
65swb45 elder statesman Join Date: Apr 2004 TLCA# 1086 Posts: 6,124	Ed, I didn't realize the doors you had were for a later model. I've got an ad up in the wanted section for the guts of the door, lock mechanisms, latches, window regulator etc. If you've got both sides,we might be able to work something out on that too. You can ship the carb by itself. Less chance of damage that way. __________________ A carbureted man in a fuel injected world. 65SWB45, 64LWB45, 68FJ40, 76HJ45,84FJ60, 76K5, 73Sub454, 89Sub7.4[gone], 97Sub5.7 TLCA delegate, Trail Crew-LAC TLCA, The White Trash of the Elwood Chapter my website: http://www.marksoffroad.net

12-26-06, 11:14 PM	#23
KT40 IH8MUD Junior Join Date: Jul 2005 Location: Redwood City,CA TLCA# 13481 Posts: 83	PM'd you about the hood hinges