what kind of spray gun should I get for small jobs?

e9999 · 12-25-07, 07:21 PM

I don't know much about spray guns. But I have the occasional small paint jobs to do that brushes are not great for. Things like bumpers, roof racks, basically smallish narrow things.
I have a big gun but the spray is pretty big when used with 40 psi or more. Like maybe a foot high one foot away. Not sure. And I don't think I could get that pattern smaller playing with flow rates. Also can't imagine it's OK to spray 1" away. So, doing narrow parts like the above would mean a lot of wasted paint and worse a big cloud of extra paint floating around to deal with. And also a lot of cleaning the gun.
So, unless there are tricks to using a big gun for very narrow patterns (pray tell), I'm thinking it might be good getting a little gun, something intended for detail work. Maybe not quite airbrush size but close. Spray width of an inch or 2 wide maybe. I can deal with the extra time needed. Would also be good to use on stuff still on the truck if the spray is controlled and narrow enough.

Advice on what to get / not get or what to do or not do? Tricks to doing narrow stuff? Am I dreaming?

Texx · 12-25-07, 08:13 PM

Harbor freight has a suction type spray gun that holds maybe a half pint. Exactly what you need, they're around twelve bucks.

e9999 · 12-25-07, 08:20 PM

I saw this. Is that what you mean? Good?

Harbor Freight Tools - Quality Tools at the Lowest Prices

what kind of sprays do those things give?

they also have a couple of HVLP and gravity fed guns for detail work. Are those kinds better? like these:
Harbor Freight Tools - Quality Tools at the Lowest Prices and Harbor Freight Tools - Quality Tools at the Lowest Prices

Dave-T · 12-25-07, 11:53 PM

Check out this site and their forums a bit, you may find some useful info.....

Welcome To Autobodystore.com

Texx · 12-27-07, 03:31 AM

The first one is the one you want. Infinitely adjustable for pattern and volume. While the other two SHOULD be, also, I've tried both, and the pattern is approximately the same as rearing your head back, holding one nostril, and heaving forth. I ended up throwing the purple one away.

e9999 · 12-27-07, 01:02 PM

Quote:

Originally Posted by Texx

The first one is the one you want. Infinitely adjustable for pattern and volume. While the other two SHOULD be, also, I've tried both, and the pattern is approximately the same as rearing your head back, holding one nostril, and heaving forth. I ended up throwing the purple one away.

good to know.
thanks

Wile E Coyote · 12-27-07, 05:38 PM

Preval makes a very small, reusable aerosol sprayer that will spray automotive quality paints surprisingly well. Hardware stores, would have 'em.

e9999 · 12-29-07, 10:12 AM

thanks

well, I got the little HF one just to play with. Can't go wrong having fun for $10. If this has potential, I may get a good one down the line.

e9999 · 12-31-07, 09:05 AM

well, I tried the little guy. Seems to work fine. Nice finish with rustoleum despite my thinning it out with paint thinner rather than ethanol. Got just 2 or 3 largish drops sticking out (out of an entire trailer hitch assembly). Does that mean I ran too low a pressure? (I did try to go low (about 30-40 psi to minimize overspray.)
How do you know when you are at the right pressure (mist vs large drops)?

12-25-07, 07:21 PM	#1
e9999 You want to do what...? Join Date: Sep 2003 Location: PRK Posts: 10,189	what kind of spray gun should I get for small jobs? I don't know much about spray guns. But I have the occasional small paint jobs to do that brushes are not great for. Things like bumpers, roof racks, basically smallish narrow things. I have a big gun but the spray is pretty big when used with 40 psi or more. Like maybe a foot high one foot away. Not sure. And I don't think I could get that pattern smaller playing with flow rates. Also can't imagine it's OK to spray 1" away. So, doing narrow parts like the above would mean a lot of wasted paint and worse a big cloud of extra paint floating around to deal with. And also a lot of cleaning the gun. So, unless there are tricks to using a big gun for very narrow patterns (pray tell), I'm thinking it might be good getting a little gun, something intended for detail work. Maybe not quite airbrush size but close. Spray width of an inch or 2 wide maybe. I can deal with the extra time needed. Would also be good to use on stuff still on the truck if the spray is controlled and narrow enough. Advice on what to get / not get or what to do or not do? Tricks to doing narrow stuff? Am I dreaming? __________________ '97: 88K, 3xlock, Custom HD roo bar for sale, 285 MT/Rs on steelies, Hanna sliders, 851+1.5"/863/N73/N74E/SD24, ARB bull with M12, Kaymar with duals, Kaymar rack, Slee TC skid, 2m/440, more stuff, loose nut behind the wheel!) '03: 99K, the better half's... DD and souped up DR650

12-25-07, 08:13 PM	#2
Texx IH8MUD Lifer Join Date: Feb 2002 Posts: 1,888	Harbor freight has a suction type spray gun that holds maybe a half pint. Exactly what you need, they're around twelve bucks. __________________ world's cleanest 89 FJ-62, and a few parts... 85 xcab hilux 4x4 resto'ed, 67 XKE, 1500 Vulcan, 80 Fj40 under resto..mine now! ! 03 Tacoma TRD SR5, Suzuki DR350 Born to raise Hell! Right after my nap.

12-25-07, 08:20 PM	#3
e9999 You want to do what...? Join Date: Sep 2003 Location: PRK Posts: 10,189	I saw this. Is that what you mean? Good? Harbor Freight Tools - Quality Tools at the Lowest Prices what kind of sprays do those things give? they also have a couple of HVLP and gravity fed guns for detail work. Are those kinds better? like these: Harbor Freight Tools - Quality Tools at the Lowest Prices and Harbor Freight Tools - Quality Tools at the Lowest Prices __________________ '97: 88K, 3xlock, Custom HD roo bar for sale, 285 MT/Rs on steelies, Hanna sliders, 851+1.5"/863/N73/N74E/SD24, ARB bull with M12, Kaymar with duals, Kaymar rack, Slee TC skid, 2m/440, more stuff, loose nut behind the wheel!) '03: 99K, the better half's... DD and souped up DR650 Last edited by e9999; 12-26-07 at 09:16 AM.

12-25-07, 11:53 PM	#4
Dave-T IH8MUD Lifer Join Date: Oct 2006 Location: Oakhurst CA TLCA# 16951 Posts: 1,415	Check out this site and their forums a bit, you may find some useful info..... Welcome To Autobodystore.com __________________ 1984 FJ60---Hi-perf 2F with other goodies 1978 Hilux---Dirty old man truck 1994 Honda XR600R 2003 Polaris RMK 800 (@)==Toyota==(@) <----- 60's rule!

12-27-07, 03:31 AM	#5
Texx IH8MUD Lifer Join Date: Feb 2002 Posts: 1,888	The first one is the one you want. Infinitely adjustable for pattern and volume. While the other two SHOULD be, also, I've tried both, and the pattern is approximately the same as rearing your head back, holding one nostril, and heaving forth. I ended up throwing the purple one away. __________________ world's cleanest 89 FJ-62, and a few parts... 85 xcab hilux 4x4 resto'ed, 67 XKE, 1500 Vulcan, 80 Fj40 under resto..mine now! ! 03 Tacoma TRD SR5, Suzuki DR350 Born to raise Hell! Right after my nap.

12-27-07, 05:38 PM	#7
Wile E Coyote IH8MUD Lifer Join Date: Sep 2005 Location: Lake Havasu and Kingman, AZ Posts: 1,150	Preval makes a very small, reusable aerosol sprayer that will spray automotive quality paints surprisingly well. Hardware stores, would have 'em. __________________ ="Are you gonna sit there on that friggin computer all day or what?" The desert dwellin, roadrunner chasin, soooper-genius! '90 FJ 62, '08 Scion head unit, chopped quarters and rockers, bedlined exterior, and mostly stock. My soft wheeler and DD. '85 Dodge Ramcharger a little built, and a little beat. My hard wheeler.

12-29-07, 10:12 AM	#8
e9999 You want to do what...? Join Date: Sep 2003 Location: PRK Posts: 10,189	thanks well, I got the little HF one just to play with. Can't go wrong having fun for $10. If this has potential, I may get a good one down the line. __________________ '97: 88K, 3xlock, Custom HD roo bar for sale, 285 MT/Rs on steelies, Hanna sliders, 851+1.5"/863/N73/N74E/SD24, ARB bull with M12, Kaymar with duals, Kaymar rack, Slee TC skid, 2m/440, more stuff, loose nut behind the wheel!) '03: 99K, the better half's... DD and souped up DR650

12-31-07, 09:05 AM	#9
e9999 You want to do what...? Join Date: Sep 2003 Location: PRK Posts: 10,189	well, I tried the little guy. Seems to work fine. Nice finish with rustoleum despite my thinning it out with paint thinner rather than ethanol. Got just 2 or 3 largish drops sticking out (out of an entire trailer hitch assembly). Does that mean I ran too low a pressure? (I did try to go low (about 30-40 psi to minimize overspray.) How do you know when you are at the right pressure (mist vs large drops)? __________________ '97: 88K, 3xlock, Custom HD roo bar for sale, 285 MT/Rs on steelies, Hanna sliders, 851+1.5"/863/N73/N74E/SD24, ARB bull with M12, Kaymar with duals, Kaymar rack, Slee TC skid, 2m/440, more stuff, loose nut behind the wheel!) '03: 99K, the better half's... DD and souped up DR650

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode