Local For Sale/Wanted Section!

[Wayneraintree]

Go ahead and post parts, rigs, whatever you would like to sell cruiser related...... as always location, accurate description, and price are mandatory

I know there is stuff in the garage somewhere needing to be sold... no excuse for clutter Post up if you would like to sell cruiser/Toy4X4 related... if you see something of interest for sale locally (parts, rigs, etc.) feel free to link them to a post.

[Straydog]

I saw a 79 FJ40 for parts for sale in the paper this weekend. Price=pay for this add and its yours 717-695-2992

http://autos.pennlive.com/Autos?tp=T...E.COM-PN-AUTOS

[Wayneraintree]

You can also post stuff wanted to buy...... or needed, or giveaway stuff!

I have a set of near perfect FJ-60 stock rims off the 87' 100$

[jtaco1]

Originally Posted by UGLY66

I saw a 79 FJ40 for parts for sale in the paper this weekend. Price=pay for this add and its yours 717-695-2992

http://autos.pennlive.com/Autos?tp=T...E.COM-PN-AUTOS

I called the guy the day it came out and he never got back to me, figure it sold. Man I need a project truck

[jamarquardt22]

Originally Posted by jtaco1

Man I need a project truck

You could just work on mine for me some more

Andy

[jtaco1]

Originally Posted by jamarquardt22

You could just work on mine for me some more

Andy

I will be doing that, but I need something that I can beat on Did you end up getting that rear axle? Gonna be finishing off the garage this weekend, so if you want to work on it up here your more than welcome.

[jamarquardt22]

Originally Posted by jtaco1

I will be doing that, but I need something that I can beat on Did you end up getting that rear axle? Gonna be finishing off the garage this weekend, so if you want to work on it up here your more than welcome.

Thats going to have to wait a bit. E-fan inprogress now and this weekend isnt good anyhow. If you want somthing to beat on how bout I get you a hammer and anvil?

Andy

PS. Since this is the for sale section I have a Bed extender for a 95-04 taco for sale $75 in Mountville, PA 17554

[SHAMROX80]

Any one have a trashed stock birf and a longfield or similiar I could do some "testing" on?

[ruger280]

I was at the parts yard in New Ringgold, PA today. They have a 74 fj40 , what's left, god axles, the engine's not seized, hood's not too bad, and the rest is in my garage waiting to be transplanted into my 69. If anyone goes looking, it's at the bottom of the hill in the old steel.

[bsacavag]

I did a disk brake conversion on my 69 FJ-40 and have the original brake drums that I obviously don't need any longer. I don't want anything for them, just want to give to someone who can use them. I also have 3 rebuild kits for wheel cylinders that I never took out of the packages so if someone could use them, let me know, too.

Bruce Sacavage

[brian]

mmmm i could use the front seats.

are the seats themselves the same, or are they left and right?
i have a set that has a crappy DS and a good PS, if they are not lefts and rights that would work prety good.


it's been a while since i looked at them, that's why i ask.

[Wayneraintree]

Sorry Brian, the seats are sold... the driver bottom is worn heavily so it sounds like the same as your situation...I think you can swap the lowers on the seats if that helps.

[Wayneraintree]

Hard top and ambi doors are sold....

[Straydog]

I'll put these up here first if any one is interested.

Early 10 spline rear axle, didn't wine, looks to have been rebuilt

4 drum brakes, entire assemblys, were rebuilt by PO, cheap way to get almost new

'78 steering column with wheel

'66 steering wheel, good condition

turn signal assembly, slightly bent turn arm

there's more. I have to go through it.

[crawlin40]

Here is what I have:
2 transfer cases from 3 spds one with 3 spd tranny still attached (both vac shifts) $50 for all of it, 3 spd xfer/floor shift type without linkage $40, Tacoma lock out hubs in great shape pulled from a truck with 119k on the clock, these will not fit '86-95' Toys only will fit Tacoma, can be used in the swap to lock out hubs instead of Warns or the like. The Auto to manual hub swap in Tacos is a little bit more extensive than in 86-95 rigs so do your Homework as to what else you need. $100 for the hubs.

Thanks, for looking

Matt 610-683-7955 Kutztown, PA

[Wayneraintree]

Matt, I'll take one of the 3 speed cases... don't really want the 3speed tranny though if ya don't mind....

[Wayneraintree]

http://forum.ih8mud.com/sale-parts/153571-oe-discbrake-40-55-45-rims-4-a.html

[Wayneraintree]

http://forum.ih8mud.com/showthread.p...61#post2132661

[candograge]

lookig for a hardtop for a 71 fj40 even just the top i have sides and hatch door

[candograge]

for a 40 or a 60 let me know ?

[Wayneraintree]

let you know about what? the hysteer arms?

I could use that spare nose cone housing ("3-speed" tcase) if you have one....

[brian]

i'm going to need a DS, front, exterior door handle/latch, chrome for an '87 60 real soon.
anybody have one?

[Wayneraintree]

I have two FJ-60 3rds with around 110K miles on them... 3.73 stock ratio. I got them from Gary and planned to use them but plans changed. Paid 125$

[Wayneraintree]

300$ 5 33 x 12.50 x 15 MTR's http://forum.ih8mud.com/showthread.p...40#post2181040

[crawlin40]

Cleaning out the garage, hope you find something you like. All parts are in Eatern Pennsylvania and/or shipped from 19530 Zipcode. I can meet you at PAragon or Rausch Creek for pickup of parts. Please Email me at
crawlin40@hotmail.com rather than on this list, it will be quicker response. I can provide pics email for info, please be patient
Thanks for looking.
Matt R. TLCA# 12322

-Smittly Built front cage kit for an fj40 includes front hoop, bottom plates, and two connector pieces $50

-A complete front cage for a 40 built by UPnOver back in the day, front of cage connects to A-pillars and allow use of door handles and winow handles, complete from main hoop forward, does not offer rear passenger seat protection, could use the steel from the smitty built above and have a sweet cage, or bolt right in and use if you do have back seats/rear passengers that want protection $150

-late model jumpseats with swing out support, no rust through but have been painted black over the grey, need to reupholstered to look nice, are strong and usable now if you do not have a show truck $200

-3speed transfer case w/complete florr linkage and 2 3 speed driveshafte ends this allows to use the lower 3 speed gears and have the driveshaft ends ready to go, I will also include a complete extra 3 speed case so that you have an extra housing in case you break one: $200

-3 3 speed driveshfat ends for a 3speedxfer to 4 speed conversion all 3 for $30

-Mels ignition points elimnator kit never used for a 75 fj40 will fit other years and includes the JT Outfitters Coil $60

-3 speed vac shift case+3 speed trans+floor shift adapter for the trans $30 (cheap)

-Distributor for a '74 Land Cruiser $20

-2 1978 windshield wiper switches both work one is from a 40 one from a 55 hookups are same picture on the switch is different $20 for both

-1 pair of Conferr fj40 1 and 1/2" over stock shackles $20 for the pair

-1 fj40 tie rod $10

-1 bottom ambulance door striker $5

-1 factory jack kit from a toyota not sure what year jack is brown and no wrenches are in the kit

-1 ifs ps box for a mini or 4runner good shape from a non wrecked truck moves nicley no hard spots with pitmen arm. $25

-1 set of Aisin Tacoma lock out hubs: from a non wheeled tacoma pick up really nice shape rig had 119k on the clock when removed $125 these $450 from the dealer get rid of ADD and save money on gas!

PLEASE USE MY HOTMAIL TO GET A HOLD OF ME crawlin40@hotmail.com Thanks
Matt R.

[racefanmartin]

Originally Posted by Wayneraintree

300$ 5 33 x 12.50 x 15 MTR's
http://forum.ih8mud.com/showthread.p...40#post2181040

Jeff, Have you sold these yet? and approx how much tread left?
thanks