For Sale/Wanted

[roughnready]

Originally Posted by 1969cruzer

anyone go look at the fj40 in pfafftown from up above?

If your interested just drive on over you aint but 5min away

[R.K.]

These are my old beadlocks. They are just over a year old, and in great condition. They are dirty in the pics, if they were clean they would like like new. The current owner is going up to 1 tons so the 6 lug BP won't work any more. He is a motivated seller, make him an offer.

Call Chris at 336-215-8268.

[For Sale] Allied biead lock 6 lug - North Carolina 4x4 Forum

[BenMara]

what are the specs on the wheels ok i see the size what about back space? wonderin if will still need spacers to run these on my 80

Originally Posted by R.K.

These are my old beadlocks. They are just over a year old, and in great condition. They are dirty in the pics, if they were clean they would like like new. The current owner is going up to 1 tons so the 6 lug BP won't work any more. He is a motivated seller, make him an offer.

Call Chris at 336-215-8268.

[For Sale] Allied biead lock 6 lug - North Carolina 4x4 Forum

[R.K.]

Originally Posted by BenMara

what are the specs on the wheels ok i see the size what about back space? wonderin if will still need spacers to run these on my 80

I think the wheels have 3.75" backspacing.

[lt1fire]

I took my front adjustable pan hard to have new slee blue bushings in. Well Tarheel 4wd couldn't get the old ones out and demolished one of the bushings with parts of the metal sleeve still stuck and bent in the hole. I don't have time to track down a machine shop to remove those parts and take out the other bushing to put the new ones in. So I just ordered a brand new adjustable one from slee so hopefully this will be me next week because the cruiser is now undriveable again

Anyway if anyone wants an adjustable front panhard with the brand new bushings let me know. I'll let them go for cheap since I don't want to have to deal with finding someone to fix it.
Oh yeah this rod is one of the slee do it yourselfers that the PO bought and installed.
I'd say $100 for the bushings (they sell for $45 pluss shipping) and the rod.

I'll get pics up on saturday.

[R.K.]

A friend has an FJ40 rear axle he needs to sale. It is set-up for spring-over and has disc brakes. The axle shafts are included, but NOT the third member. He just removed this from his 40 ans swapped in a centered rear axle.

Not sure what he wants for it, but I can find out if anyone is interested.

[addicted56]

1988 Toyota Land Cruiser

Woold make a good rig. Don't have to worry about scratching it or rock rash.

[rutbeer]

A few things that need to go:

3spd transfer case with park drum $50

3spd transmission all new bearings and synchros some time back FREE
Battery support from my 78 40 series FREE
Steering box from my 78 FREE
Bunch of tie rod parts and relay pivot from a 78 FREE

Minitruck inner axles from an 85 $20
GM alternator rebuilt $20

I'm pretty sure I have more stuff, but will need to look. I know I will have a 78 fuel tank with one weeping seam, but otherwise solid. I should be done with it in a few days.

[lt1fire]

Originally Posted by addicted56

1988 Toyota Land Cruiser

Woold make a good rig. Don't have to worry about scratching it or rock rash.

dang i'd love to jump all over that

[abtaco]

Originally Posted by jfz80

Welcome aboard Andrew!!! jason here......

you might browse through the last several pages of current stuff and keep peeking back. I did see a camper shell down in Farmville NC that was all solid, all white. I could prolly get a friend to grab the number if your interested in white. Where were you when i was tryin to liquidate my taco toys ?

hey there jason, you must be steves friend. I think I met you fishing with steve one time? I was probably in baltimore when you where trying to get rid of your tacoma stuff I wish I would have been around, that was a sweet set up if I remember correctly. Does that camper top have a rear window? if so I would be interested. Problem is, dont know when I will be back down that way until we move back in July. Any who, lookin forward to joining the group, got big plans for the ol tacoma!

[mdemeglio]

Craigslist: '71 FJ55 in Clayton for $1000
1971 toyota fj55 land cruiser

[Mtbcoach]

Originally Posted by mdemeglio

Craigslist: '71 FJ55 in Clayton for $1000
1971 toyota fj55 land cruiser

Sold, I missed another one...

[lt1fire]

[For Sale] 91 FJ80 on 37"s - North Carolina 4x4 Forum

Not a bad price for this 91

[roughnready]

Still in serious need of a F or 2F motor really dont wanna sell my 40 buts it's gettin to where i might have to if i cant find one cause i know i cant afford motor work on it.thnks

[GREEKMEAT]

Hey, not a member, but I need an upper dash pad for my 75 FJ40. Condition does not matter cause I am going to put a cover on it, as long as it's not bent or warped. Thanks.
gallisvile1@msn.com

[addicted56]

Originally Posted by roughnready

Still in serious need of a F or 2F motor really dont wanna sell my 40 buts it's gettin to where i might have to if i cant find one cause i know i cant afford motor work on it.thnks

Rough and ready. I know there is an engine where I bought my FJ40. It is a whole parts rig. I bet you could get the whole truck for about 1K. He is in New Hill.

I'll dig for his e-mail

[roughnready]

Thanks i didnt expect finding one on here would be such a hassle but your the only one who knows of any. I dont think i can afford a whole parts rig right now i was just trying to find a motor to get mine running again but maybe i'll be able to get just the motor out of him.thnks again

[jfz80]

Zack.....

I might be able to finagle one out of a local non member for +/- $100 but it would likely need a rebuild which would likely run you 500-1000 depending on what is needed inside. But you have a motor in need of rebuild anyways so i dont know if it would help you out any other than being a 2F. Did you get in touch w/ the guy w/ the 60 posted above?

good luck, and my offer still stands if you decide to part with her; give me a shout

Have you shopped around for a rebuild? might not be a bad way to go vs selling at a loss and buying another car perhaps

[addicted56]

I saw a couple of V8 Swap kits for sale. They might still be out there in the classifieds. You can get a decent 350 for nothing these days. They are all over Craigslist.

[R.K.]

Originally Posted by addicted56

I saw a couple of V8 Swap kits for sale. They might still be out there in the classifieds. You can get a decent 350 for nothing these days. They are all over Craigslist.

You can get a good, late model, fuel-injected V8 cheap these days.

[96Cruiser13]

i need a LSVP for my 96. Dealership only item, so i figured i'd see if anyone had one laying around before i went to toyota

thanks

[southerncruiser62]

Contact Chris at Fred Anderson Toyota Parts (919) 787-0099 tell him you are with ONSC, they will likely even ship the part to you.

[96Cruiser13]

Originally Posted by southerncruiser62

Contact Chris at Fred Anderson Toyota Parts (919) 787-0099 tell him you are with ONSC, they will likely even ship the part to you.

yeah, i was curious to see if i could find one off here a little cheaper than the dealership price...

[southerncruiser62]

wouldn't hurt to contact, you may be surprised at his pricing.

[strong_toy]

Originally Posted by 96Cruiser13

i need a LSVP for my 96. Dealership only item, so i figured i'd see if anyone had one laying around before i went to toyota

thanks

I agree with calling Fred Anderson if buying new. You can have it in a day or two. The other option is to check the local junk yards and see if you can pick one up. There is a junk yard in Durham that had an 80 in October. I doubt LSPV's are real high demand parts.

You can do a junk yard search around NC with car-part.com. The LSPV isn't on the parts list, but try something more generic like starter, axle, etc. to find yards with 80's (and LX450's). Then you can call them to see if they will sell you the LSPV. Of course it pays to shop around... You may find it is cheaper to buy from Fred Anderson and mail it to you.

[jleeFJ62]

Call Rick at RHT. Number is in my sig. 25% off OEM parts for Ih8mud members.

[little_joe]

Originally Posted by jleeFJ62

Call Rick at RHT. Number is in my sig. 25% off OEM parts for Ih8mud members.

Just as an fyi, Chris @ Fred Anderson in Raleigh is a supporter of ONSC and gives us at least 25% off Toyota list.

[Cruiser Man]

Anyone have four OEM wheels preferably alloy that will fit my cruiser for cheap? See sig for rig!!!

[rutbeer]

Originally Posted by Cruiser Man

Anyone have four OEM wheels preferably alloy that will fit my cruiser for cheap? See sig for rig!!!

If you are interested in a skinny non-OEM look, I will have five American Racing Outlaw II wheels available tomorrow or the next day. I'm going back to the vintage look on my truck. I'm thinking about $35/wheel?
These are 15x8 wheels...same as the set I sold a year ago or so.

[southerncruiser62]

Barry, you may want to check with him, if these are going on the 80 then I would say shy away from trying to use 15" wheels. I know Stephen has and they have worked fine but.....