adventr
SILVER Star
Finally ready to do a run on these. Here are the details:
1x EDC Bracket - Fits York 210 Compressors (not included)
1x Custom Water Pump Pulley - CNC Machined for Aux Belt
1x Hardware kit - Mounts Compressor Bracket to 1FZ Head
1x Tensioner Assembly w/Bolt- OEM Toyota
1x V-Belt
You will need to supply your own compressor.
You will need to *lightly* trim your factory exhaust manifold heat shied (easily done with a pair of snips).
You will need to remove your PAIR valve on a 93-94 1FZ motor (lots of resources in 80's Tech for this).
This kit enables you to mount a York Compressor (with 2-groove V-Belt clutch) onto the head of your 1FZ engine. It is bolt-on, and comes with a replacement water pump pulley that you will need to install.
Bracket will come Primered (gray), and ready for you to paint it whatever color you want.
Price: $365 shipped to lower 48.
Deposit: $100
Lead time: 2 weeks
Need a minimum of 25 orders to make this work. After we hit 25 paid deposits, I'll leave the order open for three (3) days to accomodate as many people as we can.
Kits will be shipped in the order in which we receive the deposits.
Paypal deposits to: stainlessdoctor@yahoo.com
PLEASE include your shipping address in the Paypal notes & your forum name!
After you've made your $100 deposit, post up in this thread and I will add your name to the list.
As soon as your kit is completed, I will send you a PM. The remaining balance of $265 can then be sent, and I will FedEX your kit. Simple as that.
List of paid deposits:
1. Delancy
2. Dgurley2000
3. The Claw
4. newtomelx
5. Scotia
6. TXBruiser
7. 40TUDE
8. DMOZ
9. dtchevy42
10. ranchero7
11. RC5280
12. Mbridenour
13. Rocktoy74
14. Scotia
15. Solid Taco
16. LARGEONE
17. Rule308
18. Speedy
19. Ngrich99
20. JDLSANTOS
21. Weak-link
22. Jpwelling
Thanks!
1x EDC Bracket - Fits York 210 Compressors (not included)
1x Custom Water Pump Pulley - CNC Machined for Aux Belt
1x Hardware kit - Mounts Compressor Bracket to 1FZ Head
1x Tensioner Assembly w/Bolt- OEM Toyota
1x V-Belt
You will need to supply your own compressor.
You will need to *lightly* trim your factory exhaust manifold heat shied (easily done with a pair of snips).
You will need to remove your PAIR valve on a 93-94 1FZ motor (lots of resources in 80's Tech for this).
This kit enables you to mount a York Compressor (with 2-groove V-Belt clutch) onto the head of your 1FZ engine. It is bolt-on, and comes with a replacement water pump pulley that you will need to install.
Bracket will come Primered (gray), and ready for you to paint it whatever color you want.
Price: $365 shipped to lower 48.
Deposit: $100
Lead time: 2 weeks
Need a minimum of 25 orders to make this work. After we hit 25 paid deposits, I'll leave the order open for three (3) days to accomodate as many people as we can.
Kits will be shipped in the order in which we receive the deposits.
Paypal deposits to: stainlessdoctor@yahoo.com
PLEASE include your shipping address in the Paypal notes & your forum name!
After you've made your $100 deposit, post up in this thread and I will add your name to the list.
As soon as your kit is completed, I will send you a PM. The remaining balance of $265 can then be sent, and I will FedEX your kit. Simple as that.
List of paid deposits:
1. Delancy
2. Dgurley2000
3. The Claw
4. newtomelx
5. Scotia
6. TXBruiser
7. 40TUDE
8. DMOZ
9. dtchevy42
10. ranchero7
11. RC5280
12. Mbridenour
13. Rocktoy74
14. Scotia
15. Solid Taco
16. LARGEONE
17. Rule308
18. Speedy
19. Ngrich99
20. JDLSANTOS
21. Weak-link
22. Jpwelling
Thanks!
Last edited: