Wanted to thank everyone as always for such a great time and a great event. Did not get much trail time as the new engine (less than a week old) is running too hot for my liking at trail speeds. But my son and I buzzed around on back roads and...
It was great getting to see all of y'all again. I had a great time running around the trails with quite a few of you~ 😁 I hope I see y'all out there again soon!
Henry (Black HZJ77)
Hobart tigmate for sale. Works great on ac and DC, just doesn't have the adjustment parameters I now need for thin ac work.
$800 for any current ONSC member. Does not come with bottle, but I will send it with a nice flow style gas regulator...
Made some progress today. also ordered new body mount bushings, and some lizard skin products. going to lay down some sound deadening, then heat control, then cover it with some raptor liner as a top coat on the underside.
After a year or so of training and loads of other BS i figured out i was getting station in Savannah, So during Christmas break i came back up to finish her up and bring her home with me, Finished installed the fuel cell, buttoning up some...
Got back towards savannah and heard quite the bearing whinning noise from the transmission/transfer case, limped it back and pulled it apart the next weekend to figure out what was up, pulling the transmission in the barracks parking lot was not...
Spent a day on dirt with my dogs, experimenting with adjustments on my minty fresh new Dobinsons MRR shocks. Did just over 100 miles in total, and found that empty boat ramps make for a fantastic and repeatable damper test rig. I did 6 passes on...
Decided to bite the bullet and go after the head gasket so hopefully that will give peace of mind for SAS. First time I’ve tackled a HG, so I’m sure it will be a slow process. Thought I made pretty good progress in 3hrs with the upper intake...
Was putting my ‘92 back together after a deserved full paint job. Clear coat was starting to fail after 32 years. I made new door cards and upholstered them while the 80 was at the paint shop. All that’s left is repainting the front bumper...
Picked up a 97 the nice gentleman delivered it. This one’s not blown up which makes my machine shop happy when I drop them off for clean up and machining.