samh

Does this belong to anyone here? Has Montana plates.

Was taking a quick valley spin last night before Easter dinner when this Rover Series 1 and I spotted each other. We pulled over, met, and chatted for a few and ended up in his driveway checking out his 70 series. Good fella, wearing Overland...

@3_puppies you and the wife are getting steak dinners on me for this one. I’m stoked! Even the wife approved so all is well in Pburg. I drove it 65 all the way home with zero issues and everything working great. Even the spray nozzle...

Spotted in the Bitterroot today, 81 FJ Co build. Probably the cleanest cruiser I've ever laid eyes on. Owner said he just bought in in Socal at an auction. I didn't get many pics, I was too busy chatting with the owner and a hottie from the...

So not a cruiser but this is a pretty rad little Toyota. 77 celica. Check out the original dealership sticker from Havre MT

in a hurry in a 60, now that is funny.

Slightly outside of Bozeman: The wife and I stopped at the Landcruiser Heritage Museum on our way down to Moab last week. If you haven't been, I highly recommend it. Make sure you call ahead to reserve your time. No walk ins during COVID. We had...

Custom awesomeness

Saw this gem in Belgrade! Hoping to get a better look tomorrow.

Yesterday at Murdoch's

Buying an inexpensive one was on my list for the Summer so this works out great. Send me an email with your contact details and we can set something up. samh at samh dot net.

I'll take this in trade for a six pack of whatever beverage suits your fancy, @geo5.

Day 2. Hit the woods. The ATV is used on Louisiana Wildlife Management Areas where I cannot drive the Cruiser (although in the past I did take it down some ATV trails before I had the ATV). About a mile into one trail and the LA mud was too...

Thread hijack is ok. The lines I'm using are OEM Toyota and I can't say how the BRH02934 from Cruiser Teq compare. I've been running this setup for ca. 4 1/2 years and a conservative 80k miles without issue. No leaks, good front brakes if all...

Thanks for the message. This is my first rodeo with brake lines so I appreciate the Intel.

Will someone please verify that the interface between where the soft brake line and the caliper meet is acceptable in this photo, please? I purchased part #BRH02934 from Cruiser Teq for my '62 and the depth of the female threads on the caliper...

Gimme a day or so to buy a 200 to put it on. :cool:

Hey y'all, So as we all tend to do, i have my ears to the ground looking for parts and deals for various project. Well I stumbled upon a good deal I cant take advantage of, so I want to throw it out here. ***THIS IS ONLY AVAILABLE FOR LOCAL...

For many MT folks, spring time is when we dig our head out of the snow and fly down south in search of more sunshine and maybe a little red sand... At the end of March, I took a road trip down to Arizona and made a few stops in Utah along the...

With the skin off, we marked areas on the inner structure that needed to be cut out and replaced. We had 3 areas total needing cut out and new metal put in. This is where the donor roof came in handy as we had to replace a compound curve on the...

That's it. Just clip the tip with a smaller hole first, run the A's and then clip a little larger and run the gutters. It's a DTM product as well, so don't need to primer if you burn through the paint/primer on prep, just don't leave any bare...

get rid of the old sealant as clean as you possibly can. i'd probably pick it out best as you can then gently wire wheel the residuals to clean it up. then prime it, automotive seam sealer, n a coat of paint. here's the legal part: i'm not a...

I used 3M 08307 Self-Leveling Seam Sealer in mine when I did my rust repair and such. Worked great and laid down really easily. I used ~1.5 tubes https://forum.ih8mud.com/threads/how-to-guide-roof-rust-repair-by-removing-roof-skin-fj60-62.1311628/

I'm way the heck down in Bozeman so unless you feel like taking a trip to Yellowstone as a side trip I think you'll be better off finding somebody up in Whitefish or Great Falls. Not sure if Idaho has a cruiser community here on Mud but...

I've gone to the Duratracs. Third set now. First are 33x12.5r15-C on 8" rims now on my daughter's 60 (25k+ kms / 16.5k m & still 13/32nd depth). Ran Whipsaw last year at 15psi with a 2800kg 60 series. Lots of rocks and roots, ran great...