LandCruisinMy93

I discovered something interesting while replacing the incandescent bulbs in the marker lights on the ARB bumper with LED bulbs. The Amber "Hockey stick" DRL of the headlights turns white if you replace the Amber DRL of the side marker with an...

I finally got around to printing out the full M8rix bezel and lightly sanding and painting it. The very few posts I could find on the interior gray color said it was very close to "Lunar Mist Metallic." So, after paying $16 for a can of touch up...

will the Transferflow 46 gal Tundra tank not work for the Sequoia?

I pulled an ignition switched positive from under either the driver seat or center console. I used that to trigger a relay. The relay has an 8awg power wire from the battery and from the relay to the fuse box. This way you're not overloading your...

I don't tend to hang out here, however, recently I installed a Scosche M8rix switch control in my 2nd gen Sequoia. I have never gone with a switch setup like this before. I tend to wire individual switches with fuses and relays. I generally...

I received my metripack parts to finish out the Scosche M8rix connections, as well as, a side terminal adapter to drop down to allow all positive battery connections. I also received the replacement control pack cover for the WARN winch...

That 1st gen will serve you well. Easier to work on, ultra reliable, better fuel economy...just lacks the sex appeal and the working hatch handle, Lol. Loved mine, it's what drove me to buy another.

Thanks for all the kind words folks. Got my mega warrior mounted up for the summer season this week, and the camping kit dialed in. Plastidipped the awning and the front emblem just for kicks. Should be seeing my skid package from Tandem...

I received the bracket for the M8rix I had designed and sent to have made. I of course didn't use it in the way I had designed it, Lol. Instead of the M8rix sitting flat underneath, I screwed it to the bracket. I just didn't want to make holes...

Put new tires and wheels on Saturday 35x11.50R17 Maxxis Razr AT's on the ICON Recon Pro 17x8.5" +25 offset wheels. ******caveat***** Fun fact, ICON and and several other sources say you need Extensed thread lugs. I Didn't. I bought regular and...

Got it all buttoned up and a few pictures. Ferda! A picture of the Scosche M8rix mounted in view where the old tow haul panel was. And the switch panel. I mentioned in post #18 that I hadn't sorted out what to do with the center diff switch...

Then I went through the spliced wiring in the dash. I will say that I approve of the splice method and use it myself on occasion. Not on the vehicle side of a harness. I also use shrink tube and not electrical tape. So, I removed the...

Next I did a rough install to make sure I had everything plugged in that needed plugged in. After which I gutted all superfluous connections from the Phoenix wiring harness. I then proceeded to remove all of the excess wires that were...

Alright! The new Phoenix Automotive Android head unit arrived this morning. Fortuitous timing as I had the dash torn apart, the old stereo removed and the new reverse camera wiring ran. Please don't judge me too harshly for the Deutsche...

I couldn't help myself. I had to remove the crappy backup camera wiring. At least I may have solved some noises. A lot of loose fasteners and missing clips were discovered. Unfortunately it doesn't appear the factory backup camera wiring made...

Well, I am blessed that the installer didn't cut off the factory plugs for the stereo. They did, however, splice into several of the wires on the factory side. And then, during my journey of discovery I found scotchloks...I deplore scotchloks...

Looks like the main body control module pin 3 for the right side and pin 16 for the left. Pin 3 is color coded BE so Beige, and pin 3 is L so Lavender=Blue They should be positive output. So you need a good ground coming from your mirror turn to...

I forgot to mention I received my brackets for the Morimoto fog lights and the winch control pack. I have to say the WARN Evo 12k is my least favorite winch...I've removed the motor cover a half dozen times already to retrieve hardware from...

Hey Y'all, If you have a 2nd Gen Tundra or 2nd Gen Sequoia and you have the 5.7L 3UR-FE engine, we have a 2-Part video series that will help you perform a Valve Cover Gasket job, if you find that you either have a leak at one or both of the...

Here's Part 2.

Don’t usually do much here with my ‘07 Tundra. Cross threaded a O2 sensor. Long day. Drilled it out TIG welded the new Vibrant SS bung and painted it back up. I always paint my exhausts. Seem to last longer.

Well, I wasn't going to modify this but got a flat tire, which destroyed the crappy stock tire. Put on BFG KO2 295/70r18 (34.5") tires. No rubbing so far. Now I need to raise the front up a couple inches to get ride of the rake. PSA: I put one...

Only thing my wife has let me do to her sequoia, that she knows of at least.... Looks so much better

Get yourself a block tester and some test fluid. Go from there.

Well, it's 0336 and I just got home from finishing buttoning up the Sequoia. I sprayed the M8RIX panel with adhesion promoter and a coat of filler primer. I haven't any sanding or anything but I did install it. I still intend on smoothing it out...