Mine came from the PO with the ARB non-winch version. This may not have been my first choice (love the Slee short bus look), but I've learned to really like it, especially with the GGM mont plate that allowed the installation of a winch. I've...
I finally got around to installing the CB antenna I have had sitting around in preparation for future needs, I do at some point plan on installing a GMRS radio as well.
Yes I stole one of my dogs Kong balls to put on the antenna, seen...
Because of the updates you posted yesterday I read through this whole thread start to finish. I am new here to the ih8mud community and to the 80 club. I just got mine in November after losing my Sequoia in an accident in 10/23. I just couldn't...
Yes, our 80’s have the spots to fasten all 4 bolts 👍. Good info here
https://forum.ih8mud.com/threads/oem-subtank-retrofit-install-project-with-pics.213266/
80 got a facelift. Was getting water in headlight with all this rain. Also both headlights adjusters have been rusted for years. Pattern was cross eyed!
So went with Depos and Colights.
IH8wiring
Big Cons:
Brakes - VERY SOFT, brakes felt almost non-existent, not safe (PRETTY NORMAL AND HIGHLY SUBJECTIVE IF YOU HAVEN'T DRIVEN OTHER 80's)
Power steering leak - Appears to be a wrong hose on the reservoir ( LUCKY IF ONLY THE RESERVOIR LEAKS...
Most of the cons you listed are pretty common.
Why does the kayak rack need to be sawed off? I can imagine it preventing the sunroof from venting up but can’t you test the sunroof by retracting it back?
What’s is a loose/stuck transfer case...
I replaced my blinkers with leds and used this flasher relay from superbrightleds to fix the hyper flashing. Its still working perfectly after many years. some of the bulbs caused radio interference so I changed them back to OEM. I kept the...
Hi, as I mentioned above, I haven't tried it yet. I'm in the Northeast and winter temps aren't good for painting. My shop only has an open combustion overhead propane heater, so I don't tend to paint in cold weather. So I'm waiting for spring...
Please post pictures of how closely it matches.
I’d like to update this thread with some grey options.
https://forum.ih8mud.com/threads/spray-paint-color-matches-for-brown-80-series-interiors.1125901/
I haven't tried it yet (too cold here) but SEM graphite grey was recommended to me. I got a can at a local auto parts store (O'Rileys). I can report back once I try it in the Spring.
Finally installed the Lutz speed-o-meter calibration unit. Took about 15min do it including the test drive and 5 min trying to find my tube of RTV sealant.
17 “up” clicks and now she’s dead on accurate. 👍👍
Someone on tacomaworld had the same issue and they had to use a polarity ground switching module for the mleds to function properly. Unfortunately they aren’t made for 9006 connectors.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.