GXO
Reactions
3,327

Latest activity Postings Media Albums Post Areas About Post areas Events

    • GXO
      I mean, he is going to retire soon. I could sponsor him and hire him out haha
    • GXO
      Bump, updated price (lower).
    • GXO
      My FIL decided he wants to spend some time in GA this spring so he is coming down and will be looking at the BJ60 as a project. Works for me! He is a master level diesel mechanic and has owned and worked on BJ60s in Canada for decades. Lucky...
    • GXO
      That's a 3b all right :lol:
    • GXO
      Someone asked me if I had the OEM awnings available. The easy answer: I would never do that to you. They are horrible. They take forever to setup and weigh a metric ton and also won't stay waterproof or store well at all. I cut off...
    • GXO
      This thing ran like a champ till it didn't. I took out the veggie system and cleaned up what I could....but I have more to do.
    • GXO
      I am hoping I am home for a while so I can get into the search! I am certain it is a massive air leak.
    • GXO
      GXO replied to the thread Builds GXOG: My 2003 GX470.
      The air suspension and shock controller is in a slot that is the same as the 100 series console. You just have to get that part and pop out the controls and pop in the cup. There is also a flat plate that can be used if you want to use it for a...
    • GXO
      GXO replied to the thread Builds GXOG: My 2003 GX470.
      Got the cleanup done. Going to replace my grip tape on the lower rocker as it has peeled (I cover the clip holes with tape). I also need to finish my cutting and tacking sheet metal. Wife's GX repair is taking the lead on priority right now.
    • GXO
      GXO replied to the thread Transmission Issue.
      I would do a few things....one, I would continue to drain and fill the ATF more frequently. You are basically running on burnt ATF and the dirt is in the valve body. So, you have a few options, and what I would do: 1. Pin your transmission...
    • GXO
      $25,000 obo Located in north Georgia. Can tow to meet you somewhere if you like (no charge to AL, TN, NC, SC). This is a 2016 Conqueror 440 Extreme that we have been using for overlanding and remote basecamp setup. It is a highly capable...
      • 20240128_142925620_iOS.jpg
      • 20240128_142919141_iOS.jpg
      • 20240128_142909641_iOS.jpg
      • 20240111_161436513_iOS.jpg
      • 20240111_144725795_iOS.jpg
      • 20231125_210437667_iOS.jpg
    • GXO
      GXO replied to the thread Transmission Issue.
      I assume it is cold. How old is the fluid? Drain and fill every oil change for the next 4-5 oil changes usually clears up viscosity breakdown.
    • GXO
      filter is clean and new.
    • GXO
      Thanks all. I will keep hunting the fuel and walk the lines and check the tank. I just have to find time now :)
    • GXO
      Will do. A quick test. Looks like I need some diesel!
    • GXO
      I bled the filter and pressurized it with primer and bleeding. I have fuel in the filter but not getting fuel to the injectors. I have shown combustion with ether so it will turn over. I feel like I have a fuel line tank to lift pump or...
    • GXO
      We have a 1983 BJ60 LHD Canadian G spec BJ60 with a 3B with an H55F behind it. We were driving home and the truck started to lose power while driving (like it had a lot to start with). I was pushing hard to keep it running and revved up the...
    • GXO
      GXO reacted to Rednexus's post in the thread Builds GXOG: My 2003 GX470 with Like Like.
      Teaching the wife may be a good idea - Mrs. Rednexus is far more detail-oriented and better at artistic things than me (and let's face it, welding is really an art). She's definitely better at things like applying silicone,, caulking trim, etc...
    • GXO
      GXO reacted to HomersCanyonero's post in the thread Builds GXOG: My 2003 GX470 with Like Like.
      I need to look into it. I have a couple things I want to weld onto the GX470 (EimKeith LLS, oem factory cam tabs)
    • GXO
      GXO reacted to Rednexus's post in the thread Builds GXOG: My 2003 GX470 with Like Like.
      I got started with a $200 HF Titanium 125 flux core welder. Bought it as an emergency purchase to get stripped studs out during my header install. It lasted ~2 years before crapping out but it let me do a lot of small-scale welding including...
    • GXO
      GXO replied to the thread Builds GXOG: My 2003 GX470.
      I love that she is learning to weld. I plan to improve my welding as it has been a few years. We have a lot of welding to do on the BJ60 haha
    • GXO
      GXO replied to the thread Builds GXOG: My 2003 GX470.
      Doing some clean up on HP. Got a leaky ARB line to the rear locker fixed (exhaust touched it) and about to cut out more of the rear bumper to make more room for the 37s. Also going to cut and retack the welds on the front fender supports (wife...
    • GXO
      GXO replied to the thread Can I tow this?.
      oh I suspect the new trailer is going to slow me down and suck a lot more go juice. Trust me haha
    • GXO
      GXO replied to the thread Can I tow this?.
      Sorry for the pupper loss :(. We are upgrading to 400Ah Renogy self warming LiPo and 400w of solar. Adding wifi therm and other controls as well as soft start on the AC. The rest will be my mods. Starlink mobile and some other networked/wifi...
    • GXO
      GXO replied to the thread Can I tow this?.
      Towing our current trailer I get 10-13 in my 03 with 37s and 4.88s and I generally stick at 65ish. I get 13-15 not towing. The big game changer was the valve body upgrade, torque lockout upgrade, the gears, and the extra cooling. Oh, and the...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom