71fj40cruiser

I have a complete engine in SW MO. If you are interested I am sure we can make a deal. Jim

Locked and loaded for Hot Springs Off Road Park for the next 4 days and the path of totality. Or should I say, Toyotality 🙃

It is proceeding nicely. It has slowed a bit, due to other projects. I am now in the process of connecting all the gauge/dash lights to the 4.7 harness. I have completed the transfer case. The CDL now works off the switch and the 4L lever. Next...

AC hose kits almost ready to go live on the site 😄 These are the firewall and condenser adapters.

I have one in St. Louis free of charge from my ‘98

I have one in sw MO

If you listen closely you can here it running. Starting and running off factory ignition. Woohoo!

Well, this week was spent with a lot of things that make it look like I didn't get a lot done. Got driveshafts made, longer rear, shorter front. Install radiator, heater hoses, power steering lines w/cooler. Did not use the factory p/s cooler. I...

As far as the eclipse trip id say 2 things. #1 I think myself are @71fj40cruiser along with @PACK MULE are the only semi regular posters on this forum along with a couple of others that are not "official " members. #2. I personally don't enjoy...

Spectre 9961 air intake

My apologies … 4.7 is a great engine in a great 80 work of the past…. Want to see it completed

This is the direction I went with the power steering. Banjo fitting at the pump and the inverted flare at the gear box. Both are -6 x 16.5 mm. For the fuel, I used a filter from a 100 series. It will screw right on the inverted flare supply...

That is a difficult question to answer. It has always been more of a group of guys getting together to wheel/overland or whatever. Never any official meetings, dues or such. Maybe someone else with more insight will chime in. As far as the...