I sometimes throw together diagrams like this for systems I'm working on to collected scattered information. Here's a pretty rough draft of one for the front wheel hub and steering knuckle.
Idea is to have all information needed for disassembly...
The numbers I used came from Toyota as "factory specs" but since there much to consider, I used it as a starting point.
For the 2000 Toyota Land Cruiser 100 Series (4.7L V8, 4WD), the factory roof rack is typically rated at 165 lbs dynamic and...
We removed the OEM roof rack and installed an aftermarket one. The OEM one (per specs) couldn't handle the weight of the tent and two adult bodies. We've not had issues since. (2000 100 series)
02 LX470 here
I had ABS, VSC TRAC, VSC OFF, and BRAKE light all illuminated for the better part of 3 years now. Nothing felt off at all, I finally pulled the codes late last year. “Front right wheel speed sensor fault.” I just replaced the front...
Thank you! I climbed under the dash yesterday (yes, the back hurts this morning) and was able to unbolt the unit to examine it. The top nut is a pain, but otherwise no real issues. I misspoke earlier; the vehicle is a 2000 100 series (not that it...
Would it be the same part for 2001 Lexus LX470? I have the same issue with ABS, VSC, & Brake light constants on, Techstream could not connect to provide any data, also jump terminal provide no code. TIA.
no computers or fuel injection
the block is the same size and will bolt to the existing frame mounts and existing bellhousing, use all your existing clutch components with flywheel
things that will need addressed, wiring for alt, throttle...
Man-A-Fre still sells the kit with the Weber and adapter plate (along with some other stuff). I have this on my '70 FJ-40 (1F) and it has worked great for many years...