You 203 doubler people...

incogrhino · 10-22-07, 04:40 PM

So, how much oil are you puttin in your 203 doubler?The range box part after you have it all bolted up.Almost getting to that point and figured I'd ask others what they think. Thanx MUD

2damslow · 10-22-07, 04:53 PM

I welded a threaded bung to that 6-hole plate. Right in the middle. Hasn't failed me so far. I run synthetics too, just in case I screwed up in my line of thinking.

Gumby · 10-22-07, 05:06 PM

That's what AA suggested and that's what I did to.

hammerhead · 10-23-07, 02:18 PM

ORD puts the fillplug a little bit above the center of the plate. Approx level with the upper side bolts on the plate. You can look at a pic of it here...

http://www.offroaddesign.com/catalog/doubler.htm

10-22-07, 04:40 PM	#1
incogrhino IH8MUD Addict Join Date: Feb 2004 Location: ravenna Mi sittin 10 deep. TLCA# 16350 Posts: 565	You 203 doubler people... So, how much oil are you puttin in your 203 doubler?The range box part after you have it all bolted up.Almost getting to that point and figured I'd ask others what they think. Thanx MUD __________________ Drafting the big bricks with my little brick 78'&80'fj40'&a83'fj60 Great Lakes Land Cruisers

10-22-07, 04:53 PM	#2
2damslow IH8MUD Regular Join Date: Dec 2005 Location: hyrum Utah. Posts: 252	I welded a threaded bung to that 6-hole plate. Right in the middle. Hasn't failed me so far. I run synthetics too, just in case I screwed up in my line of thinking. __________________ Some people really have a way with words... I am not have way.

10-22-07, 05:06 PM	#3
Gumby Former Wheeler Join Date: Dec 2002 Location: Knee deep in hookers and gin TLCA# 5658 Posts: 5,107	That's what AA suggested and that's what I did to. __________________ War Pig and the nameless 45lv "Don't you know, Stan, it's *always* between a Giant Douche and a Turd Sandwich."

10-23-07, 02:18 PM	#4
hammerhead IH8MUD Lifer Join Date: Jul 2003 Location: Central, Utah Posts: 1,988	ORD puts the fillplug a little bit above the center of the plate. Approx level with the upper side bolts on the plate. You can look at a pic of it here... http://www.offroaddesign.com/catalog/doubler.htm __________________ utah4x4club.com U4WDA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode