How do I reset the maint req light ? 06 Highlander (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 12, 2004
Threads
470
Messages
3,087
Hey everyone,
Changed the oil myself on the new Highlander, however the maint req light is on. The oil was done of course, but how do I reset the dash light? Anyone?

Thanks,
Zack
 
It's in the owners manual.
 
Hey everyone,
Changed the oil myself on the new Highlander, however the maint req light is on. The oil was done of course, but how do I reset the dash light? Anyone?

Thanks,
Zack

here you go
Turn ignition key to 'ON' and press the odometer button until the display reads actual mileage... not Trip A or B.

Turn ignition key to OFF.

Hold in the same button you used in step 1.

While holding the button in, turn ignition key to 'ON'.

The 'Maint Reqd' light should blink and go out.
 
here you go
Turn ignition key to 'ON' and press the odometer button until the display reads actual mileage... not Trip A or B.

Turn ignition key to OFF.

Hold in the same button you used in step 1.

While holding the button in, turn ignition key to 'ON'.

The 'Maint Reqd' light should blink and go out.

Thank you I will try it.


Zack
 

Users who are viewing this thread

Back
Top Bottom