high lift jack/shovel mount kits ???

[ckline]

has anyone tried to mount to the factory roof rack like this?

[NDA431FJR]

Originally Posted by joebob2586

for my tail light covers they just fit right on the passenger side, on the drivers side you have to drill 3 holes on the inside of the panel to fit the screws...really easy, the hardest part was taking off the taillights.

To make it easier to access the front nut on the passenger side, I drilled a hole on the panel and use a 6" extension on the 10mm deep socket.

Taped the 10 mm deep socket and extension to prevent either one from dropping.





The hole will be hidden when you put the side panel cover back.



The three holes to drill on the drive side, to secure the light guard with self tapping metal screws.




For the drive side, the front nut is accessible from the jack area.



Loosening the back nuts is quicker if you have a set of stubby ratcheting wrench.

[kp66]

sweet great info .
thanks