1 PZ tranny and V6 tranny.

canadian bum · 09-19-05, 08:58 PM

The bell housing off of the 1 PZ bolts right up to the V6 tranny. But the input shafts are different lengths. The tranny's look identical for the first part anyway. The input shafts are the same diameter, so I was wondering if the input shafts can be interchanged?

tlcruiserman · 09-21-05, 03:47 PM

That sounds right to me about the tranny's the PZ used the R151 Tranny and so does the mini truck correct?

Michael

09-19-05, 08:58 PM	#1
canadian bum IH8MUD Regular Join Date: Sep 2004 Location: Red Deer, Alberta Posts: 221	1 PZ tranny and V6 tranny. The bell housing off of the 1 PZ bolts right up to the V6 tranny. But the input shafts are different lengths. The tranny's look identical for the first part anyway. The input shafts are the same diameter, so I was wondering if the input shafts can be interchanged? __________________ 78 FJ45 Now going to be 1HD-T / Build up thread 79 BJ40 Going to be a turbo 3B /Starting to become many pieces 06 Taco Double Daily driver, 3 inch lift, pro comp rims and 285/75R16 BFG A/T 76 Ford Courier Bagging Unit /Rolled once,record jump 39 feet,record speed 90 mph,no brakes

09-21-05, 03:47 PM	#2
tlcruiserman IH8MUD Lifer Join Date: Jun 2004 Location: San Diego, CA USA TLCA# 7932 Posts: 1,078	That sounds right to me about the tranny's the PZ used the R151 Tranny and so does the mini truck correct? Michael __________________ Michael tlcruiserman@westcoastcruisers.com West Coast Cruisers Incorporated

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode