How to turbo charge a 1 PZ?

canadian bum · 09-17-05, 05:21 PM

Is there a kit or something that I can use on this engine? Or what turbo off of a car would work on this engine?

cgiesbrecht · 09-17-05, 09:33 PM

give me a month and i will post what i will be using on my PZJ75...
Wayne

roscoFJ73 · 09-17-05, 11:07 PM

Denco make a kit for the 1PZ . Ibelieve its the 1HZ kit modified for the 5 cyls.
Im not sure where I seen it but there is a denco dealer in Canada??

This is the aussie site that sell them
http://turbotech.com.au/denco2.htm

crushers · 09-19-05, 06:31 PM

so my custom turbo is ready for pickup and the truck is SUPPOSED to be out of the shop tomorrow (WOW did that ever set by my 14 day scheduale!!

so over the next couple weeks i should be able to give some test times and a drivers impression of the PZ engine and the feel of the PZJ75 as a whole...
cheers

canadian bum · 09-19-05, 06:33 PM

sounds good, I'm very interested in how it turned out for you. What did you get your turbocharger off of?

crushers · 09-19-05, 07:01 PM

it is a brand new one configured to my application, not a used one...

09-17-05, 05:21 PM	#1
canadian bum IH8MUD Regular Join Date: Sep 2004 Location: Red Deer, Alberta Posts: 221	How to turbo charge a 1 PZ? Is there a kit or something that I can use on this engine? Or what turbo off of a car would work on this engine? __________________ 78 FJ45 Now going to be 1HD-T / Build up thread 79 BJ40 Going to be a turbo 3B /Starting to become many pieces 06 Taco Double Daily driver, 3 inch lift, pro comp rims and 285/75R16 BFG A/T 76 Ford Courier Bagging Unit /Rolled once,record jump 39 feet,record speed 90 mph,no brakes

09-17-05, 09:33 PM	#2
cgiesbrecht IH8MUD Junior Join Date: Jun 2005 Location: Vancouver, BC Posts: 84	give me a month and i will post what i will be using on my PZJ75... Wayne __________________ Clarence Giesbrecht Vancouver, Canada 1990 HDJ81

09-19-05, 06:31 PM	#4
crushers IH8MUD Lifer Join Date: Feb 2004 Posts: 9,793	so my custom turbo is ready for pickup and the truck is SUPPOSED to be out of the shop tomorrow (WOW did that ever set by my 14 day scheduale!! so over the next couple weeks i should be able to give some test times and a drivers impression of the PZ engine and the feel of the PZJ75 as a whole... cheers __________________ pulling this info out of my ass so take it with a pound of salt "People are poor because they don't spend money wisely, tough sh!t !!! " John Galt 09/22/08 "educate yourself. Sorry if that seems too blunt." John Galt 11-01-08 Wayne in Ontario http://www.ivoac.ca join today

09-19-05, 06:33 PM	#5
canadian bum IH8MUD Regular Join Date: Sep 2004 Location: Red Deer, Alberta Posts: 221	sounds good, I'm very interested in how it turned out for you. What did you get your turbocharger off of? __________________ 78 FJ45 Now going to be 1HD-T / Build up thread 79 BJ40 Going to be a turbo 3B /Starting to become many pieces 06 Taco Double Daily driver, 3 inch lift, pro comp rims and 285/75R16 BFG A/T 76 Ford Courier Bagging Unit /Rolled once,record jump 39 feet,record speed 90 mph,no brakes

09-19-05, 07:01 PM	#6
crushers IH8MUD Lifer Join Date: Feb 2004 Posts: 9,793	it is a brand new one configured to my application, not a used one... __________________ pulling this info out of my ass so take it with a pound of salt "People are poor because they don't spend money wisely, tough sh!t !!! " John Galt 09/22/08 "educate yourself. Sorry if that seems too blunt." John Galt 11-01-08 Wayne in Ontario http://www.ivoac.ca join today

09-17-05, 11:07 PM	#3
roscoFJ73 Diesel for blood Join Date: Jul 2003 Location: west australia Posts: 6,523	Denco make a kit for the 1PZ . Ibelieve its the 1HZ kit modified for the 5 cyls. Im not sure where I seen it but there is a denco dealer in Canada?? This is the aussie site that sell them http://turbotech.com.au/denco2.htm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode