tranny swap ???

cruiser user · 06-02-05, 10:17 AM

My 82 bj has 355km on it and the tranny worries me. My 75 fj has a rebuilt tranny and transfer case with less than 1ooo miles on it are these units swapable??

crushers · 06-02-05, 12:53 PM

not really, you will need to change out the imput shaft and the t/case will not bolt up...

cruiser user · 06-02-05, 10:10 PM

Thanks, guess I'll have to start thinking about a rebuild or replacement. Any suggestions?

crushers · 06-02-05, 11:37 PM

yah, if you are going to rebuild then look at sticking a H55F in instead...

cruiser user · 06-03-05, 12:25 PM

I thought of thet, asked gs crusiers if they had one but they didn't, can you reccomend any other sources??

crushers · 06-03-05, 12:35 PM

yep, i have one here if you are interested...
wayne@crushersrule.com

cruiser user · 06-05-05, 10:30 PM

Yes I am interested, tell me more about the transmission, 5 speed?, milage , condition , price.... locaton etc,, thanks

cruiser user · 06-05-05, 10:32 PM

Forgot my adress: heronfarm@optonline.net

crushers · 06-06-05, 08:20 AM

sent you email direct.

06-02-05, 10:17 AM	#1
cruiser user IH8MUD Junior Join Date: May 2005 Location: Lagrangeville New york TLCA# 4816 Posts: 142	tranny swap ??? My 82 bj has 355km on it and the tranny worries me. My 75 fj has a rebuilt tranny and transfer case with less than 1ooo miles on it are these units swapable??

06-02-05, 12:53 PM	#2
crushers IH8MUD Lifer Join Date: Feb 2004 Posts: 9,793	not really, you will need to change out the imput shaft and the t/case will not bolt up... __________________ pulling this info out of my ass so take it with a pound of salt "People are poor because they don't spend money wisely, tough sh!t !!! " John Galt 09/22/08 "educate yourself. Sorry if that seems too blunt." John Galt 11-01-08 Wayne in Ontario http://www.ivoac.ca join today

06-02-05, 10:10 PM	#3
cruiser user IH8MUD Junior Join Date: May 2005 Location: Lagrangeville New york TLCA# 4816 Posts: 142	thanks Thanks, guess I'll have to start thinking about a rebuild or replacement. Any suggestions?

06-02-05, 11:37 PM	#4
crushers IH8MUD Lifer Join Date: Feb 2004 Posts: 9,793	yah, if you are going to rebuild then look at sticking a H55F in instead... __________________ pulling this info out of my ass so take it with a pound of salt "People are poor because they don't spend money wisely, tough sh!t !!! " John Galt 09/22/08 "educate yourself. Sorry if that seems too blunt." John Galt 11-01-08 Wayne in Ontario http://www.ivoac.ca join today

06-03-05, 12:25 PM	#5
cruiser user IH8MUD Junior Join Date: May 2005 Location: Lagrangeville New york TLCA# 4816 Posts: 142	good icea I thought of thet, asked gs crusiers if they had one but they didn't, can you reccomend any other sources??

06-03-05, 12:35 PM	#6
crushers IH8MUD Lifer Join Date: Feb 2004 Posts: 9,793	yep, i have one here if you are interested... wayne@crushersrule.com __________________ pulling this info out of my ass so take it with a pound of salt "People are poor because they don't spend money wisely, tough sh!t !!! " John Galt 09/22/08 "educate yourself. Sorry if that seems too blunt." John Galt 11-01-08 Wayne in Ontario http://www.ivoac.ca join today

06-05-05, 10:30 PM	#7
cruiser user IH8MUD Junior Join Date: May 2005 Location: Lagrangeville New york TLCA# 4816 Posts: 142	Yes Yes I am interested, tell me more about the transmission, 5 speed?, milage , condition , price.... locaton etc,, thanks

06-05-05, 10:32 PM	#8
cruiser user IH8MUD Junior Join Date: May 2005 Location: Lagrangeville New york TLCA# 4816 Posts: 142	forgot Forgot my adress: heronfarm@optonline.net

06-06-05, 08:20 AM	#9
crushers IH8MUD Lifer Join Date: Feb 2004 Posts: 9,793	sent you email direct. __________________ pulling this info out of my ass so take it with a pound of salt "People are poor because they don't spend money wisely, tough sh!t !!! " John Galt 09/22/08 "educate yourself. Sorry if that seems too blunt." John Galt 11-01-08 Wayne in Ontario http://www.ivoac.ca join today

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode