Carter fuel pump 24V

Radd Cruisers · 04-18-05, 02:10 PM

Any feedback on these pumps?

Rob

The Dude · 04-18-05, 03:56 PM

Does it look like this? My 12V version was a delco. Lasted 65000km. I "think" my 24V is a federal mogul but it might be a carter...

Talking to the 6.2/6.5 guys that is typical life for one of these.

HZJ60 Guy · 04-18-05, 06:17 PM

Brad, is that the part number you gave me?

P61295S 03A09B

And where did you pick that up from?

Tom

Satamax · 04-18-05, 06:18 PM

Hi everybody !

Guys, where's that pump located? I seem to have probs with fuel feeding not being strong enough on steep hills!

Best regards.

Max.

Radd Cruisers · 04-18-05, 06:26 PM

Back at the tank, as close as possible to the tank on the inside frame rail.

It will be high and out of harms way.

Radd Cruisers · 04-18-05, 06:28 PM

Quote:

Originally Posted by The Dude

Does it look like this? My 12V version was a delco. Lasted 65000km. I "think" my 24V is a federal mogul but it might be a carter...

Talking to the 6.2/6.5 guys that is typical life for one of these.

Nope, simular but different.

I will get it tomorrow and shoot a picture of it.

OursSauvage · 04-19-05, 05:13 PM

Quote:

Originally Posted by Radd Cruisers

Back at the tank, as close as possible to the tank on the inside frame rail.

It will be high and out of harms way.

Hi,
What's your Cruiser's model... I never saw one of this on european's Hj6x

Radd Cruisers · 04-19-05, 05:50 PM

Quote:

Originally Posted by OursSauvage

Hi,
What's your Cruiser's model... I never saw one of this on european's Hj6x

HJ60 with a 1HZ and very deep and large long range fuel tank.

OursSauvage · 04-20-05, 12:34 AM

OK,
I understand, you put this pump because you change the tank, it's not the original assembly.
Thank's
(Désolé Max... mauvaise piste

)

crushers · 04-20-05, 06:27 AM

i have found in a couple test i ran on my own trucks that a pusher pump inline with the factroy pump increases performance...
cheers

Radd Cruisers · 04-20-05, 11:06 AM

Quote:

Originally Posted by crushers

i have found in a couple test i ran on my own trucks that a pusher pump inline with the factroy pump increases performance...
cheers

I have been told that more than once by the Ozzie boys, good to hear it from a local.

Radd Cruisers · 04-28-05, 10:56 PM

Quote:

Originally Posted by The Dude

Does it look like this? My 12V version was a delco. Lasted 65000km. I "think" my 24V is a federal mogul but it might be a carter...

Talking to the 6.2/6.5 guys that is typical life for one of these.

Looks identical to that pump you posted, picked it up today.

Are you saying it is a lesser pump?

Also did you buy thos fittings or make them up?

The box has Carter on the top and in small print is Federal Mogul.

Thanks
Rob

The Dude · 04-29-05, 12:15 AM

Not sure what you mean about lesser pump.

the fittings are a custom item

Radd Cruisers · 04-29-05, 10:17 AM

Quote:

Originally Posted by The Dude

Not sure what you mean about lesser pump.

the fittings are a custom item

65000miles seems like a short life for the pump, the pump you posted I thought was a low end pump? If so mine looks identical.

Rob

The Dude · 04-29-05, 03:28 PM

I am told from my diesel shop that that is typical life expectancey, from the delco or the carter...

Satamax · 04-29-05, 04:37 PM

Hi everybody!

Eric, c'est pas grave! Guys, where did you find thoses pumps in 24V and what was teh cost?

Best regards.

Max.

04-18-05, 02:10 PM	#1
Radd Cruisers IH8MUD Lifer Join Date: Sep 2002 Location: Vancouver Island BC Canada Posts: 3,831	Carter fuel pump 24V Any feedback on these pumps? Rob __________________ Come and visit us in Duncan, BC www.raddcruisers.ca --> 60 Series Cable Lockers available - 4.11s or 3.70s - handles and cables included --> 12HT & H55F combos available - complete & running --> in stock and ready to go.

04-18-05, 03:56 PM	#2
The Dude IH8MUD Addict Join Date: Jun 2003 Location: Saskatoon, SK TLCA# 8113 Posts: 911	Does it look like this? My 12V version was a delco. Lasted 65000km. I "think" my 24V is a federal mogul but it might be a carter... Talking to the 6.2/6.5 guys that is typical life for one of these. __________________ Brad T 88 HJ61 "Marmaduke " 12H-T, A440, extreme valve body, PI, cable lockers, PTO winch, SOA, 2" body lift, FF, ARP studs, Longfields, 5.29s, 38x14.5R16 Toyo MTs... 78 BJ 40/42/60

04-18-05, 06:17 PM	#3
HZJ60 Guy Tank Buster Join Date: Sep 2003 Location: Seattle area TLCA# 13102 Posts: 2,337	Brad, is that the part number you gave me? P61295S 03A09B And where did you pick that up from? Tom __________________ 2001 VW TDI Bora 1987 Toyota HZTJ-60 I'm a democrat member of the House of Representatives, and I've got what it takes to take what you've got!

04-18-05, 06:26 PM	#5
Radd Cruisers IH8MUD Lifer Join Date: Sep 2002 Location: Vancouver Island BC Canada Posts: 3,831	Back at the tank, as close as possible to the tank on the inside frame rail. It will be high and out of harms way. __________________ Come and visit us in Duncan, BC www.raddcruisers.ca --> 60 Series Cable Lockers available - 4.11s or 3.70s - handles and cables included --> 12HT & H55F combos available - complete & running --> in stock and ready to go.

04-20-05, 12:34 AM	#9
OursSauvage IH8MUD Regular Join Date: Apr 2005 Location: Outaouais Posts: 251	OK, I understand, you put this pump because you change the tank, it's not the original assembly. Thank's (Désolé Max... mauvaise piste ) __________________ 1987 HJ 61. 500.000 Km, Bf Mud 33x12.5x15" bodylift +5cm .... SOLD 1992 KTM 400 LC4... in France 1998 Dakota 5.2 sport (on sale) 1999 UZJ100 2001 BMW R1150 GS 2002 BMW F650 GS (Wife's bike)

04-18-05, 06:18 PM	#4
Satamax IH8MUD Regular Join Date: Oct 2004 Location: South western alps south east part of France. Posts: 285	Hi everybody ! Guys, where's that pump located? I seem to have probs with fuel feeding not being strong enough on steep hills! Best regards. Max.

04-20-05, 06:27 AM	#10
crushers IH8MUD Lifer Join Date: Feb 2004 Posts: 9,793	i have found in a couple test i ran on my own trucks that a pusher pump inline with the factroy pump increases performance... cheers __________________ pulling this info out of my ass so take it with a pound of salt "People are poor because they don't spend money wisely, tough sh!t !!! " John Galt 09/22/08 "educate yourself. Sorry if that seems too blunt." John Galt 11-01-08 Wayne in Ontario http://www.ivoac.ca join today

04-29-05, 12:15 AM	#13
The Dude IH8MUD Addict Join Date: Jun 2003 Location: Saskatoon, SK TLCA# 8113 Posts: 911	Not sure what you mean about lesser pump. the fittings are a custom item __________________ Brad T 88 HJ61 "Marmaduke " 12H-T, A440, extreme valve body, PI, cable lockers, PTO winch, SOA, 2" body lift, FF, ARP studs, Longfields, 5.29s, 38x14.5R16 Toyo MTs... 78 BJ 40/42/60

04-29-05, 03:28 PM	#15
The Dude IH8MUD Addict Join Date: Jun 2003 Location: Saskatoon, SK TLCA# 8113 Posts: 911	I am told from my diesel shop that that is typical life expectancey, from the delco or the carter... __________________ Brad T 88 HJ61 "Marmaduke " 12H-T, A440, extreme valve body, PI, cable lockers, PTO winch, SOA, 2" body lift, FF, ARP studs, Longfields, 5.29s, 38x14.5R16 Toyo MTs... 78 BJ 40/42/60

04-29-05, 04:37 PM	#16
Satamax IH8MUD Regular Join Date: Oct 2004 Location: South western alps south east part of France. Posts: 285	Hi everybody! Eric, c'est pas grave! Guys, where did you find thoses pumps in 24V and what was teh cost? Best regards. Max.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode