60 series right drive tie rod kit

Radd Cruisers · 12-31-04, 05:43 PM

You got it, 120.00 Canadian for all you Jap spec truck owners and its made in Japan.

Diescipel · 01-01-05, 10:40 AM

Speaking of Rob coming through in a pinch.... I was reviewing the records on my BJ42 and saw that when the vac pump and alternator went last summer and the PO had the truck worked on at the Toy dealer in Nanaimo, they sourced a good used 3B alternator from a BJ70 from none other than Radd Cruisers. Nice to know I have a Radd truck, at least partly. But... are these alternators no longer made? D'oh!

B

01-01-05, 10:41 AM

Where can I get one?

Radd Cruisers · 01-01-05, 01:21 PM

Quote:

Originally Posted by NorCalCruzr

Speaking of Rob coming through in a pinch.... I was reviewing the records on my BJ42 and saw that when the vac pump and alternator went last summer and the PO had the truck worked on at the Toy dealer in Nanaimo, they sourced a good used 3B alternator from a BJ70 from none other than Radd Cruisers. Nice to know I have a Radd truck, at least partly. But... are these alternators no longer made? D'oh!

B

They are still available at some unreal price, I think the vaume pump is something like 1100.00.

Prolly over 2K for the complete unit, so when you see good used ones for 800.00 you better jump on it.

I have one 24 volt unit left and no twelves.

crushers · 01-01-05, 01:38 PM

vacuum pump is $950 and the alternator is $350 so $800 is a bit steep for used. i sell the used setups for $500 after all you can not tell if they will last 6 months or 5 years.
also if you buy new the problem won't reoccure for 300,000++.

Radd Cruisers · 01-01-05, 01:47 PM

I usually sell mine rebuilt for around 600.00, the Armstrong wrecker sells his for 800.00.

Diescipel · 01-01-05, 03:50 PM

Sorry to hi-jack the thread but..... at these prices, I don't want to replace this system again--is there any preventative maintenance one could do, or is there anything to look out for to make sure they last? Or was that probably the original on this truck and after 400k kms it was time?

B

crushers · 01-01-05, 03:59 PM

Armstrong...<shiver> i am surprised they are still in business, they have been gouging their customers for 20 years...
as for prventive maintainence, did you pull yours apart and check the splines? there should be no wear at all, if there is then the days are numbered on the unit. it seems that oil changes can make a difference on the longivity as well as clean oil lines...
just a suggestion

beanz2 · 01-01-05, 05:11 PM

Has anybody ever tried fitting a vacuum pump off a 2H or a 2L(T) onto a 3B alternator? They look awfully alike.

Dave

crushers · 01-01-05, 05:32 PM

the problem is the shaft of the alternator get stripped...
the name of the wreckers in Armstrong is actually in Vernon and called Interior Auto ..

Stone · 01-01-05, 09:35 PM

Quote:

Originally Posted by Radd Cruisers

You got it, 120.00 Canadian for all you Jap spec truck owners and its made in Japan.

Rob: Do you carry the 70 series equivalent for my BJ74? If so, how much? Thanks.

Radd Cruisers · 01-02-05, 12:57 AM

Quote:

Originally Posted by Stone

Rob: Do you carry the 70 series equivalent for my BJ74? If so, how much? Thanks.

You know what, I got my last unit off of Sheldon and it was off a I think a BJ70 which I think is compatable with a 74?

My question to you guys is the 13BT or 12HT have the same built into the engine vacume pump as the 1HZ???

Radd Cruisers · 01-02-05, 01:09 AM

Quote:

Originally Posted by Stone

Rob: Do you carry the 70 series equivalent for my BJ74? If so, how much? Thanks.

Yes I can get them, we do not stock the 74 stuff.

12-31-04, 05:43 PM	#1
Radd Cruisers IH8MUD Lifer Join Date: Sep 2002 Location: Vancouver Island BC Canada Posts: 3,669	60 series right drive tie rod kit You got it, 120.00 Canadian for all you Jap spec truck owners and its made in Japan. Attached Images __________________ Check out our new location in Duncan, BC www.raddcruisers.ca --> 60 Series Cable Lockers available - 4.11s or 3.70s - all hardware included --> 12HT & H55F combos available - complete & running Limited Quantities - Deposit or Full Payment Required to hold your order while they ship

01-01-05, 10:40 AM	#2
Diescipel IH8MUD Addict Join Date: Sep 2004 Location: 95570 TLCA# 14854 Posts: 841	Speaking of Rob coming through in a pinch.... I was reviewing the records on my BJ42 and saw that when the vac pump and alternator went last summer and the PO had the truck worked on at the Toy dealer in Nanaimo, they sourced a good used 3B alternator from a BJ70 from none other than Radd Cruisers. Nice to know I have a Radd truck, at least partly. But... are these alternators no longer made? D'oh! B __________________ Brendan 1983 BJ42 bioD, lots o' Aqualu, TIC Parabolics/DT8000s, Tuffy, 33x9.5 BFG ATs, SOLD

01-01-05, 01:38 PM	#5
crushers IH8MUD Lifer Join Date: Feb 2004 Posts: 9,226	vacuum pump is $950 and the alternator is $350 so $800 is a bit steep for used. i sell the used setups for $500 after all you can not tell if they will last 6 months or 5 years. also if you buy new the problem won't reoccure for 300,000++. __________________ pulling this info out of my ass so take it with a pound of salt "People are poor because they don't spend money wisely, tough sh!t !!! " John Galt 09/22/08 Wayne Owen Sound Ontario http://www.ivoac.ca separating the rumours from the truth. join today

01-01-05, 01:47 PM	#6
Radd Cruisers IH8MUD Lifer Join Date: Sep 2002 Location: Vancouver Island BC Canada Posts: 3,669	I usually sell mine rebuilt for around 600.00, the Armstrong wrecker sells his for 800.00. __________________ Check out our new location in Duncan, BC www.raddcruisers.ca --> 60 Series Cable Lockers available - 4.11s or 3.70s - all hardware included --> 12HT & H55F combos available - complete & running Limited Quantities - Deposit or Full Payment Required to hold your order while they ship

01-01-05, 03:50 PM	#7
Diescipel IH8MUD Addict Join Date: Sep 2004 Location: 95570 TLCA# 14854 Posts: 841	Sorry to hi-jack the thread but..... at these prices, I don't want to replace this system again--is there any preventative maintenance one could do, or is there anything to look out for to make sure they last? Or was that probably the original on this truck and after 400k kms it was time? B __________________ Brendan 1983 BJ42 bioD, lots o' Aqualu, TIC Parabolics/DT8000s, Tuffy, 33x9.5 BFG ATs, SOLD

01-01-05, 10:41 AM	#3
burger Guest Posts: n/a	Where can I get one?

01-01-05, 03:59 PM	#8
crushers IH8MUD Lifer Join Date: Feb 2004 Posts: 9,226	Armstrong...<shiver> i am surprised they are still in business, they have been gouging their customers for 20 years... as for prventive maintainence, did you pull yours apart and check the splines? there should be no wear at all, if there is then the days are numbered on the unit. it seems that oil changes can make a difference on the longivity as well as clean oil lines... just a suggestion __________________ pulling this info out of my ass so take it with a pound of salt "People are poor because they don't spend money wisely, tough sh!t !!! " John Galt 09/22/08 Wayne Owen Sound Ontario http://www.ivoac.ca separating the rumours from the truth. join today

01-01-05, 05:11 PM	#9
beanz2 IH8MUD Lifer Join Date: Nov 2002 Posts: 2,126	Has anybody ever tried fitting a vacuum pump off a 2H or a 2L(T) onto a 3B alternator? They look awfully alike. Dave

01-01-05, 05:32 PM	#10
crushers IH8MUD Lifer Join Date: Feb 2004 Posts: 9,226	the problem is the shaft of the alternator get stripped... the name of the wreckers in Armstrong is actually in Vernon and called Interior Auto .. __________________ pulling this info out of my ass so take it with a pound of salt "People are poor because they don't spend money wisely, tough sh!t !!! " John Galt 09/22/08 Wayne Owen Sound Ontario http://www.ivoac.ca separating the rumours from the truth. join today

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode